From: Christian Gmeiner <christian.gmeiner@gmail.com>
Date: Tue, 28 Mar 2023 14:13:14 +0000 (+0200)
Subject: arm: mach-k3: am642: move do_dt_magic() after sysfw loading
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c0c56f64b301a4cf28b923f14f85a054d1e21ad1;p=u-boot.git

arm: mach-k3: am642: move do_dt_magic() after sysfw loading

Makes it possible to use e.g mcu_spi0 for custom board detection.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
---

diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
index 5d53358cf2..0c295e7fe2 100644
--- a/arch/arm/mach-k3/am642_init.c
+++ b/arch/arm/mach-k3/am642_init.c
@@ -183,8 +183,6 @@ void board_init_f(ulong dummy)
 
 	preloader_console_init();
 
-	do_dt_magic();
-
 #if defined(CONFIG_K3_LOAD_SYSFW)
 	/*
 	 * Process pinctrl for serial3 a.k.a. MAIN UART1 module and continue
@@ -211,6 +209,8 @@ void board_init_f(ulong dummy)
 	/* Output System Firmware version info */
 	k3_sysfw_print_ver();
 
+	do_dt_magic();
+
 #if defined(CONFIG_ESM_K3)
 	/* Probe/configure ESM0 */
 	ret = uclass_get_device_by_name(UCLASS_MISC, "esm@420000", &dev);