From: Lukasz Tekieli Date: Sun, 28 Jan 2024 19:22:47 +0000 (+0100) Subject: net: phy: motorcomm: configure pad drive strength register X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c025c8afd4002ab795c4e0a8f2aebfbe32b91c2e;p=u-boot.git net: phy: motorcomm: configure pad drive strength register This ports the pad drive strength register configuration which can be already found in the Linux driver for this PHY. Signed-off-by: Lukasz Tekieli Reviewed-by: Leo Yu-Chi Liang --- diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index 8635a960d6..a2c763c879 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -23,6 +23,12 @@ #define YTPHY_SYNCE_CFG_REG 0xA012 +#define YT8531_PAD_DRIVE_STRENGTH_CFG_REG 0xA010 +#define YT8531_RGMII_RXC_DS_MASK GENMASK(15, 13) +#define YT8531_RGMII_RXD_DS_HI_MASK BIT(12) /* Bit 2 of rxd_ds */ +#define YT8531_RGMII_RXD_DS_LOW_MASK GENMASK(5, 4) /* Bit 1/0 of rxd_ds */ +#define YT8531_RGMII_RX_DS_DEFAULT 0x3 + #define YTPHY_DTS_OUTPUT_CLK_DIS 0 #define YTPHY_DTS_OUTPUT_CLK_25M 25000000 #define YTPHY_DTS_OUTPUT_CLK_125M 125000000 @@ -114,6 +120,10 @@ #define YT8531_CCR_RXC_DLY_EN BIT(8) #define YT8531_CCR_RXC_DLY_1_900_NS 1900 +#define YT8531_CCR_CFG_LDO_MASK GENMASK(5, 4) +#define YT8531_CCR_CFG_LDO_3V3 0x0 +#define YT8531_CCR_CFG_LDO_1V8 0x2 + /* bits in struct ytphy_plat_priv->flag */ #define TX_CLK_ADJ_ENABLED BIT(0) #define AUTO_SLEEP_DISABLED BIT(1) @@ -224,6 +234,17 @@ static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask, return phy_modify(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_DATA, mask, set); } +static int ytphy_read_ext(struct phy_device *phydev, u16 regnum) +{ + int ret; + + ret = phy_write(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_SELECT, regnum); + if (ret < 0) + return ret; + + return phy_read(phydev, MDIO_DEVAD_NONE, YTPHY_PAGE_DATA); +} + static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev) { struct ytphy_plat_priv *priv = phydev->priv; @@ -425,6 +446,111 @@ static int yt8511_config(struct phy_device *phydev) return 0; } +/** + * struct ytphy_ldo_vol_map - map a current value to a register value + * @vol: ldo voltage + * @ds: value in the register + * @cur: value in device configuration + */ +struct ytphy_ldo_vol_map { + u32 vol; + u32 ds; + u32 cur; +}; + +static const struct ytphy_ldo_vol_map yt8531_ldo_vol[] = { + {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 0, .cur = 1200}, + {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 1, .cur = 2100}, + {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 2, .cur = 2700}, + {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 3, .cur = 2910}, + {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 4, .cur = 3110}, + {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 5, .cur = 3600}, + {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 6, .cur = 3970}, + {.vol = YT8531_CCR_CFG_LDO_1V8, .ds = 7, .cur = 4350}, + {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 0, .cur = 3070}, + {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 1, .cur = 4080}, + {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 2, .cur = 4370}, + {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 3, .cur = 4680}, + {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 4, .cur = 5020}, + {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 5, .cur = 5450}, + {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 6, .cur = 5740}, + {.vol = YT8531_CCR_CFG_LDO_3V3, .ds = 7, .cur = 6140}, +}; + +static u32 yt8531_get_ldo_vol(struct phy_device *phydev) +{ + u32 val; + + val = ytphy_read_ext(phydev, YT8531_CHIP_CONFIG_REG); + val = FIELD_GET(YT8531_CCR_CFG_LDO_MASK, val); + + return val <= YT8531_CCR_CFG_LDO_1V8 ? val : YT8531_CCR_CFG_LDO_1V8; +} + +static int yt8531_get_ds_map(struct phy_device *phydev, u32 cur) +{ + u32 vol; + int i; + + vol = yt8531_get_ldo_vol(phydev); + for (i = 0; i < ARRAY_SIZE(yt8531_ldo_vol); i++) { + if (yt8531_ldo_vol[i].vol == vol && yt8531_ldo_vol[i].cur == cur) + return yt8531_ldo_vol[i].ds; + } + + return -EINVAL; +} + +static int yt8531_set_ds(struct phy_device *phydev) +{ + u32 ds_field_low, ds_field_hi, val; + int ret, ds; + + /* set rgmii rx clk driver strength */ + if (!ofnode_read_u32(phydev->node, "motorcomm,rx-clk-drv-microamp", &val)) { + ds = yt8531_get_ds_map(phydev, val); + if (ds < 0) { + pr_warn("No matching current value was found."); + return -EINVAL; + } + } else { + ds = YT8531_RGMII_RX_DS_DEFAULT; + } + + ret = ytphy_modify_ext(phydev, + YT8531_PAD_DRIVE_STRENGTH_CFG_REG, + YT8531_RGMII_RXC_DS_MASK, + FIELD_PREP(YT8531_RGMII_RXC_DS_MASK, ds)); + if (ret < 0) + return ret; + + /* set rgmii rx data driver strength */ + if (!ofnode_read_u32(phydev->node, "motorcomm,rx-data-drv-microamp", &val)) { + ds = yt8531_get_ds_map(phydev, val); + if (ds < 0) { + pr_warn("No matching current value was found."); + return -EINVAL; + } + } else { + ds = YT8531_RGMII_RX_DS_DEFAULT; + } + + ds_field_hi = FIELD_GET(BIT(2), ds); + ds_field_hi = FIELD_PREP(YT8531_RGMII_RXD_DS_HI_MASK, ds_field_hi); + + ds_field_low = FIELD_GET(GENMASK(1, 0), ds); + ds_field_low = FIELD_PREP(YT8531_RGMII_RXD_DS_LOW_MASK, ds_field_low); + + ret = ytphy_modify_ext(phydev, + YT8531_PAD_DRIVE_STRENGTH_CFG_REG, + YT8531_RGMII_RXD_DS_LOW_MASK | YT8531_RGMII_RXD_DS_HI_MASK, + ds_field_low | ds_field_hi); + if (ret < 0) + return ret; + + return 0; +} + static int yt8531_config(struct phy_device *phydev) { struct ytphy_plat_priv *priv = phydev->priv; @@ -487,6 +613,10 @@ static int yt8531_config(struct phy_device *phydev) return ret; } + ret = yt8531_set_ds(phydev); + if (ret < 0) + return ret; + return 0; }