From: Tom Rini Date: Mon, 13 Sep 2021 00:32:20 +0000 (-0400) Subject: keystone2: Move CONFIG_AEMIF_CNTRL_BASE out of CONFIG namespace X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bfbb7247b6ab7027eaaabc6109655d7ba7eb880a;p=u-boot.git keystone2: Move CONFIG_AEMIF_CNTRL_BASE out of CONFIG namespace This is only used in the aemif driver that is otherwise currently keystone2 centric. Moving forward, if this is applicable to some other platform then such base addresses should be able to be obtained via the device tree. Use KS2_AEMIF_CNTRL_BASE directly now rather than indirectly. Signed-off-by: Tom Rini --- diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c index 6250e274e1..c4bc88c151 100644 --- a/drivers/memory/ti-aemif.c +++ b/drivers/memory/ti-aemif.c @@ -9,11 +9,10 @@ #include #include -#define AEMIF_WAITCYCLE_CONFIG (CONFIG_AEMIF_CNTRL_BASE + 0x4) -#define AEMIF_NAND_CONTROL (CONFIG_AEMIF_CNTRL_BASE + 0x60) -#define AEMIF_ONENAND_CONTROL (CONFIG_AEMIF_CNTRL_BASE + 0x5c) -#define AEMIF_CONFIG(cs) (CONFIG_AEMIF_CNTRL_BASE + 0x10 \ - + (cs * 4)) +#define AEMIF_WAITCYCLE_CONFIG (KS2_AEMIF_CNTRL_BASE + 0x4) +#define AEMIF_NAND_CONTROL (KS2_AEMIF_CNTRL_BASE + 0x60) +#define AEMIF_ONENAND_CONTROL (KS2_AEMIF_CNTRL_BASE + 0x5c) +#define AEMIF_CONFIG(cs) (KS2_AEMIF_CNTRL_BASE + 0x10 + (cs * 4)) #define AEMIF_CFG_SELECT_STROBE(v) ((v) ? 1 << 31 : 0) #define AEMIF_CFG_EXTEND_WAIT(v) ((v) ? 1 << 30 : 0) diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 690ef0e144..aa7b6ca9b8 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -108,8 +108,6 @@ #define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE #define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES -#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE - /* I2C Configuration */ #define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */