From: Roger Quadros Date: Wed, 28 Feb 2024 10:35:27 +0000 (+0200) Subject: net: am65-cpsw: cpsw_mdio: Switch to proper DM_MDIO framework X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=be2eb3ad8fa748d075e28328ab454f702d10bc4f;p=u-boot.git net: am65-cpsw: cpsw_mdio: Switch to proper DM_MDIO framework Add a new Kconfig symbol MDIO_TI_CPSW for the CPSW MDIO driver and build it with proper DM support if enabled. If MDIO_TI_CPSW is not enabled then we continue to behave like before. Clean up MDIO custom handling in am65-cpsw and use dm_eth_phy_connect() to get the PHY. Signed-off-by: Roger Quadros Tested-by: Ravi Gunasekaran --- diff --git a/drivers/net/ti/Kconfig b/drivers/net/ti/Kconfig index c75f418628..72eccc99e5 100644 --- a/drivers/net/ti/Kconfig +++ b/drivers/net/ti/Kconfig @@ -45,7 +45,15 @@ config TI_AM65_CPSW_NUSS imply MISC_INIT_R imply MISC imply SYSCON + imply MDIO_TI_CPSW select PHYLIB help This driver supports TI K3 MCU CPSW Nuss Ethernet controller in Texas Instruments K3 AM65x SoCs. + +config MDIO_TI_CPSW + bool "TI CPSW MDIO interface support" + depends on DM_MDIO + help + This driver supports the TI CPSW MDIO interface found in various + TI SoCs. diff --git a/drivers/net/ti/Makefile b/drivers/net/ti/Makefile index 0ce0cf2828..30c4c4b6d5 100644 --- a/drivers/net/ti/Makefile +++ b/drivers/net/ti/Makefile @@ -5,4 +5,5 @@ obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o cpsw_mdio.o obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o cpsw_mdio.o -obj-$(CONFIG_TI_AM65_CPSW_NUSS) += am65-cpsw-nuss.o cpsw_mdio.o +obj-$(CONFIG_TI_AM65_CPSW_NUSS) += am65-cpsw-nuss.o +obj-$(CONFIG_MDIO_TI_CPSW) += cpsw_mdio.o diff --git a/drivers/net/ti/am65-cpsw-nuss.c b/drivers/net/ti/am65-cpsw-nuss.c index 6da018c0f9..d68ed67183 100644 --- a/drivers/net/ti/am65-cpsw-nuss.c +++ b/drivers/net/ti/am65-cpsw-nuss.c @@ -31,8 +31,6 @@ #include #include -#include "cpsw_mdio.h" - #define AM65_CPSW_CPSWNU_MAX_PORTS 9 #define AM65_CPSW_SS_BASE 0x0 @@ -113,7 +111,6 @@ struct am65_cpsw_common { struct udevice *dev; fdt_addr_t ss_base; fdt_addr_t cpsw_base; - fdt_addr_t mdio_base; fdt_addr_t ale_base; struct clk fclk; @@ -122,13 +119,8 @@ struct am65_cpsw_common { u32 port_num; struct am65_cpsw_port ports[AM65_CPSW_CPSWNU_MAX_PORTS]; - struct mii_dev *bus; u32 bus_freq; - struct gpio_desc mdio_gpio_reset; - u32 reset_delay_us; - u32 reset_post_delay_us; - struct dma dma_tx; struct dma dma_rx; u32 rx_next; @@ -140,13 +132,7 @@ struct am65_cpsw_priv { struct udevice *dev; struct am65_cpsw_common *cpsw_common; u32 port_id; - struct phy_device *phydev; - bool has_phy; - ofnode phy_node; - u32 phy_addr; - - bool mdio_manual_mode; }; #ifdef PKTSIZE_ALIGN @@ -622,111 +608,15 @@ static const struct eth_ops am65_cpsw_ops = { .read_rom_hwaddr = am65_cpsw_read_rom_hwaddr, }; -static const struct soc_attr k3_mdio_soc_data[] = { - { .family = "AM62X", .revision = "SR1.0" }, - { .family = "AM64X", .revision = "SR1.0" }, - { .family = "AM64X", .revision = "SR2.0" }, - { .family = "AM65X", .revision = "SR1.0" }, - { .family = "AM65X", .revision = "SR2.0" }, - { .family = "J7200", .revision = "SR1.0" }, - { .family = "J7200", .revision = "SR2.0" }, - { .family = "J721E", .revision = "SR1.0" }, - { .family = "J721E", .revision = "SR1.1" }, - { .family = "J721S2", .revision = "SR1.0" }, - { /* sentinel */ }, -}; - -static ofnode am65_cpsw_find_mdio(ofnode parent) -{ - ofnode node; - - ofnode_for_each_subnode(node, parent) - if (ofnode_device_is_compatible(node, "ti,cpsw-mdio")) - return node; - - return ofnode_null(); -} - -static int am65_cpsw_mdio_setup(struct udevice *dev) -{ - struct am65_cpsw_priv *priv = dev_get_priv(dev); - struct am65_cpsw_common *cpsw_common = priv->cpsw_common; - struct udevice *mdio_dev; - ofnode mdio; - int ret; - - mdio = am65_cpsw_find_mdio(dev_ofnode(cpsw_common->dev)); - if (!ofnode_valid(mdio)) - return 0; - - /* - * The MDIO controller is represented in the DT binding by a - * subnode of the MAC controller. - * - * We don't have a DM driver for the MDIO device yet, and thus any - * pinctrl setting on its node will be ignored. - * - * However, we do need to make sure the pins states tied to the - * MDIO node are configured properly. Fortunately, the core DM - * does that for use when we get a device, so we can work around - * that whole issue by just requesting a dummy MDIO driver to - * probe, and our pins will get muxed. - */ - ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio, &mdio_dev); - if (ret) - return ret; - - return 0; -} - -static int am65_cpsw_mdio_init(struct udevice *dev) -{ - struct am65_cpsw_priv *priv = dev_get_priv(dev); - struct am65_cpsw_common *cpsw_common = priv->cpsw_common; - int ret; - - if (!priv->has_phy || cpsw_common->bus) - return 0; - - if (IS_ENABLED(CONFIG_DM_GPIO)) { - if (dm_gpio_is_valid(&cpsw_common->mdio_gpio_reset)) { - dm_gpio_set_value(&cpsw_common->mdio_gpio_reset, 1); - udelay(cpsw_common->reset_delay_us); - dm_gpio_set_value(&cpsw_common->mdio_gpio_reset, 0); - if (cpsw_common->reset_post_delay_us > 0) - udelay(cpsw_common->reset_post_delay_us); - } - } - - ret = am65_cpsw_mdio_setup(dev); - if (ret) - return ret; - - cpsw_common->bus = cpsw_mdio_init(dev->name, - cpsw_common->mdio_base, - cpsw_common->bus_freq, - clk_get_rate(&cpsw_common->fclk), - priv->mdio_manual_mode); - if (!cpsw_common->bus) - return -EFAULT; - - return 0; -} - static int am65_cpsw_phy_init(struct udevice *dev) { struct am65_cpsw_priv *priv = dev_get_priv(dev); - struct am65_cpsw_common *cpsw_common = priv->cpsw_common; struct eth_pdata *pdata = dev_get_plat(dev); struct phy_device *phydev; u32 supported = PHY_GBIT_FEATURES; int ret; - phydev = phy_connect(cpsw_common->bus, - priv->phy_addr, - priv->dev, - pdata->phy_interface); - + phydev = dm_eth_phy_connect(dev); if (!phydev) { dev_err(dev, "phy_connect() failed\n"); return -ENODEV; @@ -740,13 +630,10 @@ static int am65_cpsw_phy_init(struct udevice *dev) } phydev->advertising = phydev->supported; - if (ofnode_valid(priv->phy_node)) - phydev->node = priv->phy_node; - priv->phydev = phydev; ret = phy_config(phydev); if (ret < 0) - pr_err("phy_config() failed: %d", ret); + dev_err(dev, "phy_config() failed: %d", ret); return ret; } @@ -755,8 +642,6 @@ static int am65_cpsw_ofdata_parse_phy(struct udevice *dev) { struct eth_pdata *pdata = dev_get_plat(dev); struct am65_cpsw_priv *priv = dev_get_priv(dev); - struct ofnode_phandle_args out_args; - int ret = 0; dev_read_u32(dev, "reg", &priv->port_id); @@ -771,28 +656,7 @@ static int am65_cpsw_ofdata_parse_phy(struct udevice *dev) dev_err(dev, "Port %u speed froced to %uMbit\n", priv->port_id, pdata->max_speed); - priv->has_phy = true; - ret = ofnode_parse_phandle_with_args(dev_ofnode(dev), "phy-handle", - NULL, 0, 0, &out_args); - if (ret) { - dev_err(dev, "can't parse phy-handle port %u (%d)\n", - priv->port_id, ret); - priv->has_phy = false; - ret = 0; - } - - priv->phy_node = out_args.node; - if (priv->has_phy) { - ret = ofnode_read_u32(priv->phy_node, "reg", &priv->phy_addr); - if (ret) { - dev_err(dev, "failed to get phy_addr port %u (%d)\n", - priv->port_id, ret); - goto out; - } - } - -out: - return ret; + return 0; } static int am65_cpsw_port_probe(struct udevice *dev) @@ -811,10 +675,6 @@ static int am65_cpsw_port_probe(struct udevice *dev) sprintf(portname, "%s%s", dev->parent->name, dev->name); device_set_name(dev, portname); - priv->mdio_manual_mode = false; - if (soc_device_match(k3_mdio_soc_data)) - priv->mdio_manual_mode = true; - ret = am65_cpsw_ofdata_parse_phy(dev); if (ret) goto out; @@ -823,13 +683,8 @@ static int am65_cpsw_port_probe(struct udevice *dev) if (ret) goto out; - ret = am65_cpsw_mdio_init(dev); - if (ret) - goto out; - ret = am65_cpsw_phy_init(dev); - if (ret) - goto out; + out: return ret; } @@ -837,7 +692,7 @@ out: static int am65_cpsw_probe_nuss(struct udevice *dev) { struct am65_cpsw_common *cpsw_common = dev_get_priv(dev); - ofnode ports_np, node, mdio_np; + ofnode ports_np, node; int ret, i; struct udevice *port_dev; @@ -862,25 +717,6 @@ static int am65_cpsw_probe_nuss(struct udevice *dev) cpsw_common->cpsw_base = cpsw_common->ss_base + AM65_CPSW_CPSW_NU_BASE; cpsw_common->ale_base = cpsw_common->cpsw_base + AM65_CPSW_CPSW_NU_ALE_BASE; - cpsw_common->mdio_base = cpsw_common->ss_base + AM65_CPSW_MDIO_BASE; - - if (IS_ENABLED(CONFIG_DM_GPIO)) { - /* get bus level PHY reset GPIO details */ - mdio_np = dev_read_subnode(dev, "mdio"); - if (!ofnode_valid(mdio_np)) { - ret = -ENOENT; - goto out; - } - - cpsw_common->reset_delay_us = ofnode_read_u32_default(mdio_np, "reset-delay-us", - DEFAULT_GPIO_RESET_DELAY); - cpsw_common->reset_post_delay_us = ofnode_read_u32_default(mdio_np, - "reset-post-delay-us", - 0); - ret = gpio_request_by_name_nodev(mdio_np, "reset-gpios", 0, - &cpsw_common->mdio_gpio_reset, - GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); - } ports_np = dev_read_subnode(dev, "ethernet-ports"); if (!ofnode_valid(ports_np)) { @@ -940,12 +776,11 @@ static int am65_cpsw_probe_nuss(struct udevice *dev) dev_read_u32_default(dev, "bus_freq", AM65_CPSW_MDIO_BUS_FREQ_DEF); - dev_info(dev, "K3 CPSW: nuss_ver: 0x%08X cpsw_ver: 0x%08X ale_ver: 0x%08X Ports:%u mdio_freq:%u\n", + dev_info(dev, "K3 CPSW: nuss_ver: 0x%08X cpsw_ver: 0x%08X ale_ver: 0x%08X Ports:%u\n", readl(cpsw_common->ss_base), readl(cpsw_common->cpsw_base), readl(cpsw_common->ale_base), - cpsw_common->port_num, - cpsw_common->bus_freq); + cpsw_common->port_num); out: power_domain_free(&cpsw_common->pwrdmn); @@ -976,14 +811,3 @@ U_BOOT_DRIVER(am65_cpsw_nuss_port) = { .plat_auto = sizeof(struct eth_pdata), .flags = DM_FLAG_ALLOC_PRIV_DMA | DM_FLAG_OS_PREPARE, }; - -static const struct udevice_id am65_cpsw_mdio_ids[] = { - { .compatible = "ti,cpsw-mdio" }, - { } -}; - -U_BOOT_DRIVER(am65_cpsw_mdio) = { - .name = "am65_cpsw_mdio", - .id = UCLASS_MDIO, - .of_match = am65_cpsw_mdio_ids, -}; diff --git a/drivers/net/ti/cpsw_mdio.c b/drivers/net/ti/cpsw_mdio.c index 74cc956785..f1b1eba75d 100644 --- a/drivers/net/ti/cpsw_mdio.c +++ b/drivers/net/ti/cpsw_mdio.c @@ -5,11 +5,15 @@ * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/ */ +#include #include +#include #include #include +#include #include #include +#include #include #include #include @@ -22,6 +26,7 @@ struct cpsw_mdio_regs { #define CONTROL_FAULT BIT(19) #define CONTROL_FAULT_ENABLE BIT(18) #define CONTROL_DIV_MASK GENMASK(15, 0) +#define CONTROL_MAX_DIV CONTROL_DIV_MASK #define MDIO_MAN_MDCLK_O BIT(2) #define MDIO_MAN_OE BIT(1) @@ -72,6 +77,8 @@ struct cpsw_mdio_regs { */ #define CPSW_MDIO_TIMEOUT 100 /* msecs */ +#define CPSW_MDIO_DEF_BUS_FREQ 2200000 /* 2.2 MHz */ + enum cpsw_mdio_manual { MDIO_PIN = 0, MDIO_OE, @@ -82,8 +89,35 @@ struct cpsw_mdio { struct cpsw_mdio_regs *regs; struct mii_dev *bus; int div; + bool manual_mode; + struct clk clk; + unsigned long bus_freq; }; +static int cpsw_mdio_enable(struct cpsw_mdio *data) +{ + int ret; + + /* set enable and clock divider */ + writel(data->div | CONTROL_ENABLE, &data->regs->control); + ret = wait_for_bit_le32(&data->regs->control, + CONTROL_IDLE, false, CPSW_MDIO_TIMEOUT, true); + if (ret) + return ret; + + /* + * wait for scan logic to settle: + * the scan time consists of (a) a large fixed component, and (b) a + * small component that varies with the mii bus frequency. These + * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x + * silicon. Since the effect of (b) was found to be largely + * negligible, we keep things simple here. + */ + mdelay(1); + + return 0; +} + static void cpsw_mdio_disable(struct cpsw_mdio *mdio) { u32 reg; @@ -206,10 +240,16 @@ static void cpsw_mdio_sw_preamble(struct cpsw_mdio *mdio) } } +#if defined(CONFIG_DM_MDIO) +#define MII_TO_CPSW_MDIO(bus) (dev_get_priv((struct udevice *)(bus)->priv)) +#else +#define MII_TO_CPSW_MDIO(bus) ((bus)->priv) +#endif + static int cpsw_mdio_sw_read(struct mii_dev *bus, int phy_id, int dev_addr, int phy_reg) { - struct cpsw_mdio *mdio = bus->priv; + struct cpsw_mdio *mdio = MII_TO_CPSW_MDIO(bus); u32 reg, i; u8 ack; @@ -266,7 +306,7 @@ static int cpsw_mdio_sw_read(struct mii_dev *bus, int phy_id, static int cpsw_mdio_sw_write(struct mii_dev *bus, int phy_id, int dev_addr, int phy_reg, u16 phy_data) { - struct cpsw_mdio *mdio = bus->priv; + struct cpsw_mdio *mdio = MII_TO_CPSW_MDIO(bus); if ((phy_reg & ~PHY_REG_MASK) || (phy_id & ~PHY_ID_MASK)) return -EINVAL; @@ -316,7 +356,7 @@ static int cpsw_mdio_wait_for_user_access(struct cpsw_mdio *mdio) static int cpsw_mdio_read(struct mii_dev *bus, int phy_id, int dev_addr, int phy_reg) { - struct cpsw_mdio *mdio = bus->priv; + struct cpsw_mdio *mdio = MII_TO_CPSW_MDIO(bus); int data, ret; u32 reg; @@ -342,7 +382,7 @@ static int cpsw_mdio_read(struct mii_dev *bus, int phy_id, static int cpsw_mdio_write(struct mii_dev *bus, int phy_id, int dev_addr, int phy_reg, u16 data) { - struct cpsw_mdio *mdio = bus->priv; + struct cpsw_mdio *mdio = MII_TO_CPSW_MDIO(bus); u32 reg; int ret; @@ -361,9 +401,10 @@ static int cpsw_mdio_write(struct mii_dev *bus, int phy_id, int dev_addr, return cpsw_mdio_wait_for_user_access(mdio); } +#if !defined(CONFIG_MDIO_TI_CPSW) u32 cpsw_mdio_get_alive(struct mii_dev *bus) { - struct cpsw_mdio *mdio = bus->priv; + struct cpsw_mdio *mdio = MII_TO_CPSW_MDIO(bus); u32 val; val = readl(&mdio->regs->alive); @@ -396,22 +437,11 @@ struct mii_dev *cpsw_mdio_init(const char *name, phys_addr_t mdio_base, else cpsw_mdio->div = (fck_freq / bus_freq) - 1; cpsw_mdio->div &= CONTROL_DIV_MASK; - - /* set enable and clock divider */ - writel(cpsw_mdio->div | CONTROL_ENABLE | CONTROL_FAULT | - CONTROL_FAULT_ENABLE, &cpsw_mdio->regs->control); - wait_for_bit_le32(&cpsw_mdio->regs->control, - CONTROL_IDLE, false, CPSW_MDIO_TIMEOUT, true); - - /* - * wait for scan logic to settle: - * the scan time consists of (a) a large fixed component, and (b) a - * small component that varies with the mii bus frequency. These - * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x - * silicon. Since the effect of (b) was found to be largely - * negligible, we keep things simple here. - */ - mdelay(1); + ret = cpsw_mdio_enable(cpsw_mdio); + if (ret) { + debug("mdio_enable failed: %d\n", ret); + goto free_bus; + } if (manual_mode) { cpsw_mdio->bus->read = cpsw_mdio_sw_read; @@ -452,3 +482,129 @@ void cpsw_mdio_free(struct mii_dev *bus) mdio_free(bus); free(mdio); } + +#else + +static int cpsw_mdio_init_clk(struct cpsw_mdio *data) +{ + u32 mdio_in, div; + + mdio_in = clk_get_rate(&data->clk); + div = (mdio_in / data->bus_freq) - 1; + if (div > CONTROL_MAX_DIV) + div = CONTROL_MAX_DIV; + + data->div = div; + return cpsw_mdio_enable(data); +} + +static int cpsw_mdio_bus_read(struct udevice *dev, int addr, + int devad, int reg) +{ + struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : + NULL; + struct cpsw_mdio *priv = dev_get_priv(dev); + + if (pdata && pdata->mii_bus) { + if (priv->manual_mode) + return cpsw_mdio_sw_read(pdata->mii_bus, addr, devad, reg); + else + return cpsw_mdio_read(pdata->mii_bus, addr, devad, reg); + } + + return -1; +} + +static int cpsw_mdio_bus_write(struct udevice *dev, int addr, + int devad, int reg, u16 val) +{ + struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : + NULL; + struct cpsw_mdio *priv = dev_get_priv(dev); + + if (pdata && pdata->mii_bus) { + if (priv->manual_mode) + return cpsw_mdio_sw_write(pdata->mii_bus, addr, devad, reg, val); + else + return cpsw_mdio_write(pdata->mii_bus, addr, devad, reg, val); + } + + return -1; +} + +static const struct mdio_ops cpsw_mdio_ops = { + .read = cpsw_mdio_bus_read, + .write = cpsw_mdio_bus_write, +}; + +static const struct soc_attr k3_mdio_soc_data[] = { + { .family = "AM62X", .revision = "SR1.0" }, + { .family = "AM64X", .revision = "SR1.0" }, + { .family = "AM64X", .revision = "SR2.0" }, + { .family = "AM65X", .revision = "SR1.0" }, + { .family = "AM65X", .revision = "SR2.0" }, + { .family = "J7200", .revision = "SR1.0" }, + { .family = "J7200", .revision = "SR2.0" }, + { .family = "J721E", .revision = "SR1.0" }, + { .family = "J721E", .revision = "SR1.1" }, + { .family = "J721S2", .revision = "SR1.0" }, + { /* sentinel */ }, +}; + +static const struct udevice_id cpsw_mdio_ids[] = { + { .compatible = "ti,davinci_mdio", }, + { .compatible = "ti,cpsw-mdio", }, + { /* sentinel */ }, +}; + +static int cpsw_mdio_probe(struct udevice *dev) +{ + struct cpsw_mdio *priv = dev_get_priv(dev); + int ret; + + if (!priv) { + dev_err(dev, "dev_get_priv(dev %p) = NULL\n", dev); + return -ENOMEM; + } + + priv->regs = dev_remap_addr(dev); + + if (soc_device_match(k3_mdio_soc_data)) + priv->manual_mode = true; + + ret = clk_get_by_name(dev, "fck", &priv->clk); + if (ret) { + dev_err(dev, "failed to get clock %d\n", ret); + return ret; + } + + priv->bus_freq = dev_read_u32_default(dev, "bus_freq", + CPSW_MDIO_DEF_BUS_FREQ); + ret = cpsw_mdio_init_clk(priv); + if (ret) { + dev_err(dev, "init clock failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int cpsw_mdio_remove(struct udevice *dev) +{ + struct cpsw_mdio *priv = dev_get_priv(dev); + + cpsw_mdio_disable(priv); + + return 0; +} + +U_BOOT_DRIVER(cpsw_mdio) = { + .name = "cpsw_mdio", + .id = UCLASS_MDIO, + .of_match = cpsw_mdio_ids, + .probe = cpsw_mdio_probe, + .remove = cpsw_mdio_remove, + .ops = &cpsw_mdio_ops, + .priv_auto = sizeof(struct cpsw_mdio), +}; +#endif /* CONFIG_MDIO_TI_CPSW */ diff --git a/drivers/net/ti/cpsw_mdio.h b/drivers/net/ti/cpsw_mdio.h index ddf65a4686..240c972d69 100644 --- a/drivers/net/ti/cpsw_mdio.h +++ b/drivers/net/ti/cpsw_mdio.h @@ -10,9 +10,11 @@ struct cpsw_mdio; +#if !defined(CONFIG_MDIO_TI_CPSW) struct mii_dev *cpsw_mdio_init(const char *name, phys_addr_t mdio_base, u32 bus_freq, int fck_freq, bool manual_mode); void cpsw_mdio_free(struct mii_dev *bus); u32 cpsw_mdio_get_alive(struct mii_dev *bus); +#endif /* CONFIG_MDIO_TI_CPSW */ #endif /* CPSW_MDIO_H_ */