From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 11 Apr 2012 10:22:24 +0000 (+0000)
Subject: mx6qsabrelite: No need to set the direction for GPIO3_23 again
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bdb9f7604ddaffe623267df5c381353ac23a90a6;p=u-boot.git

mx6qsabrelite: No need to set the direction for GPIO3_23 again

There is a 'gpio_direction_output(87, 0);' call previously, so the GPIO direction is
already established.

Use gpio_set_value() for changing the GPIO output then.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
---

diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index fda3e41a03..b4d9519747 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -135,7 +135,7 @@ static void setup_iomux_enet(void)
 
 	/* Need delay 10ms according to KSZ9021 spec */
 	udelay(1000 * 10);
-	gpio_direction_output(87, 1);  /* GPIO 3-23 */
+	gpio_set_value(87, 1);  /* GPIO 3-23 */
 
 	imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
 }