From: Alison Wang Date: Mon, 27 May 2013 22:55:43 +0000 (+0000) Subject: net: fec_mxc: Add support for Vybrid VF610 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bcb6e9023a119a1cbcaf8289576e5aa155331802;p=u-boot.git net: fec_mxc: Add support for Vybrid VF610 This patch adds FEC support for Vybrid VF610 platform. In function fec_open(), RCR register is only set as RGMII mode. But RCR register should be set as RMII mode for VF610 platform. This configuration is already done in fec_reg_setup(), so this piece of code could just leave untouched the FEC_RCNTRL_RGMII / FEC_RCNTRL_RMII / FEC_RCNTRL_MII_MODE bits. Signed-off-by: Alison Wang Reviewed-by: Benoit Thebaudeau Reviewed-by: Benoît Thébaudeau --- diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 4dbcdca4a0..da95e285b7 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -516,9 +516,7 @@ static int fec_open(struct eth_device *edev) #ifdef FEC_QUIRK_ENET_MAC { u32 ecr = readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_SPEED; - u32 rcr = (readl(&fec->eth->r_cntrl) & - ~(FEC_RCNTRL_RMII | FEC_RCNTRL_RMII_10T)) | - FEC_RCNTRL_RGMII | FEC_RCNTRL_MII_MODE; + u32 rcr = readl(&fec->eth->r_cntrl) & ~FEC_RCNTRL_RMII_10T; if (speed == _1000BASET) ecr |= FEC_ECNTRL_SPEED; else if (speed != _100BASET)