From: Masahiro Yamada Date: Wed, 15 Jan 2014 09:00:25 +0000 (+0900) Subject: board: delete meaningless serial.h X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bc0009ebc639d33e15b38b55204cd1532cd5a6c0;p=u-boot.git board: delete meaningless serial.h Delete some serial.h files, whole code in which is surrounded by #if 0 ... #endif Signed-off-by: Masahiro Yamada Acked-by: Stefan Roese --- diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c index 56ba0daa05..752492fc7d 100644 --- a/board/Marvell/common/serial.c +++ b/board/Marvell/common/serial.c @@ -20,7 +20,6 @@ #include #include "../include/memory.h" -#include "serial.h" #ifdef CONFIG_DB64360 #include "../db64360/mpsc.h" diff --git a/board/Marvell/common/serial.h b/board/Marvell/common/serial.h deleted file mode 100644 index 264e2d236e..0000000000 --- a/board/Marvell/common/serial.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber , Mission Critical Linux, Inc. - * - * modified for marvell db64360 eval board by - * Ingo Assmus - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* serial.h - mostly useful for DUART serial_init in serial.c */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - -#if 0 - -#define B230400 1 -#define B115200 2 -#define B57600 4 -#define B38400 82 -#define B19200 163 -#define B9600 24 -#define B4800 651 -#define B2400 1302 -#define B1200 2604 -#define B600 5208 -#define B300 10417 -#define B150 20833 -#define B110 28409 -#define BDEFAULT B115200 - - /* this stuff is important to initialize - the DUART channels */ - -#define Scale 0x01L /* distance between port addresses */ -#define COM1 0x000003f8 /* Keyboard */ -#define COM2 0x000002f8 /* Host */ - - -/* Port Definitions relative to base COM port addresses */ -#define DataIn (0x00*Scale) /* data input port */ -#define DataOut (0x00*Scale) /* data output port */ -#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ -#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ -#define Ier (0x01*Scale) /* interrupt enable register */ -#define Iir (0x02*Scale) /* interrupt identification register */ -#define Lcr (0x03*Scale) /* line control register */ -#define Mcr (0x04*Scale) /* modem control register */ -#define Lsr (0x05*Scale) /* line status register */ -#define Msr (0x06*Scale) /* modem status register */ - -/* Bit Definitions for above ports */ -#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ -#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ - -#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ -#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ -#define McrDflt (McrRts|McrDtr) - -#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ - /* b6: transmitter empty */ -#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ - -#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ -#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ -#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ - -#define IerRda 0xf /* b0: Enable received data available interrupt */ - -#endif - -#endif /* __SERIAL_H__ */ diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c index f42510545c..6c2cf215ac 100644 --- a/board/esd/cpci750/serial.c +++ b/board/esd/cpci750/serial.c @@ -23,7 +23,6 @@ #include #include "../../Marvell/include/memory.h" -#include "serial.h" #include "mpsc.h" diff --git a/board/esd/cpci750/serial.h b/board/esd/cpci750/serial.h deleted file mode 100644 index 264e2d236e..0000000000 --- a/board/esd/cpci750/serial.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber , Mission Critical Linux, Inc. - * - * modified for marvell db64360 eval board by - * Ingo Assmus - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* serial.h - mostly useful for DUART serial_init in serial.c */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - -#if 0 - -#define B230400 1 -#define B115200 2 -#define B57600 4 -#define B38400 82 -#define B19200 163 -#define B9600 24 -#define B4800 651 -#define B2400 1302 -#define B1200 2604 -#define B600 5208 -#define B300 10417 -#define B150 20833 -#define B110 28409 -#define BDEFAULT B115200 - - /* this stuff is important to initialize - the DUART channels */ - -#define Scale 0x01L /* distance between port addresses */ -#define COM1 0x000003f8 /* Keyboard */ -#define COM2 0x000002f8 /* Host */ - - -/* Port Definitions relative to base COM port addresses */ -#define DataIn (0x00*Scale) /* data input port */ -#define DataOut (0x00*Scale) /* data output port */ -#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ -#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ -#define Ier (0x01*Scale) /* interrupt enable register */ -#define Iir (0x02*Scale) /* interrupt identification register */ -#define Lcr (0x03*Scale) /* line control register */ -#define Mcr (0x04*Scale) /* modem control register */ -#define Lsr (0x05*Scale) /* line status register */ -#define Msr (0x06*Scale) /* modem status register */ - -/* Bit Definitions for above ports */ -#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ -#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ - -#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ -#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ -#define McrDflt (McrRts|McrDtr) - -#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ - /* b6: transmitter empty */ -#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ - -#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ -#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ -#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ - -#define IerRda 0xf /* b0: Enable received data available interrupt */ - -#endif - -#endif /* __SERIAL_H__ */ diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c index 3081fad21a..83a421708b 100644 --- a/board/evb64260/serial.c +++ b/board/evb64260/serial.c @@ -21,8 +21,6 @@ #include #endif -#include "serial.h" - #include "mpsc.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/board/evb64260/serial.h b/board/evb64260/serial.h deleted file mode 100644 index bac9253852..0000000000 --- a/board/evb64260/serial.h +++ /dev/null @@ -1,63 +0,0 @@ -/* serial.h - mostly useful for DUART serial_init in serial.c */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - -#if 0 - -#define B230400 1 -#define B115200 2 -#define B57600 4 -#define B38400 82 -#define B19200 163 -#define B9600 24 -#define B4800 651 -#define B2400 1302 -#define B1200 2604 -#define B600 5208 -#define B300 10417 -#define B150 20833 -#define B110 28409 -#define BDEFAULT B115200 - - /* this stuff is important to initialize - the DUART channels */ - -#define Scale 0x01L /* distance between port addresses */ -#define COM1 0x000003f8 /* Keyboard */ -#define COM2 0x000002f8 /* Host */ - - -/* Port Definitions relative to base COM port addresses */ -#define DataIn (0x00*Scale) /* data input port */ -#define DataOut (0x00*Scale) /* data output port */ -#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ -#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ -#define Ier (0x01*Scale) /* interrupt enable register */ -#define Iir (0x02*Scale) /* interrupt identification register */ -#define Lcr (0x03*Scale) /* line control register */ -#define Mcr (0x04*Scale) /* modem control register */ -#define Lsr (0x05*Scale) /* line status register */ -#define Msr (0x06*Scale) /* modem status register */ - -/* Bit Definitions for above ports */ -#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ -#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ - -#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ -#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ -#define McrDflt (McrRts|McrDtr) - -#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ - /* b6: transmitter empty */ -#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ - -#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ -#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ -#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ - -#define IerRda 0xf /* b0: Enable received data available interrupt */ - -#endif - -#endif /* __SERIAL_H__ */ diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c index 89040a899e..5b7b989860 100644 --- a/board/prodrive/p3mx/serial.c +++ b/board/prodrive/p3mx/serial.c @@ -23,7 +23,6 @@ #include #include "../../Marvell/include/memory.h" -#include "serial.h" #include "mpsc.h" diff --git a/board/prodrive/p3mx/serial.h b/board/prodrive/p3mx/serial.h deleted file mode 100644 index 264e2d236e..0000000000 --- a/board/prodrive/p3mx/serial.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber , Mission Critical Linux, Inc. - * - * modified for marvell db64360 eval board by - * Ingo Assmus - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* serial.h - mostly useful for DUART serial_init in serial.c */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - -#if 0 - -#define B230400 1 -#define B115200 2 -#define B57600 4 -#define B38400 82 -#define B19200 163 -#define B9600 24 -#define B4800 651 -#define B2400 1302 -#define B1200 2604 -#define B600 5208 -#define B300 10417 -#define B150 20833 -#define B110 28409 -#define BDEFAULT B115200 - - /* this stuff is important to initialize - the DUART channels */ - -#define Scale 0x01L /* distance between port addresses */ -#define COM1 0x000003f8 /* Keyboard */ -#define COM2 0x000002f8 /* Host */ - - -/* Port Definitions relative to base COM port addresses */ -#define DataIn (0x00*Scale) /* data input port */ -#define DataOut (0x00*Scale) /* data output port */ -#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */ -#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */ -#define Ier (0x01*Scale) /* interrupt enable register */ -#define Iir (0x02*Scale) /* interrupt identification register */ -#define Lcr (0x03*Scale) /* line control register */ -#define Mcr (0x04*Scale) /* modem control register */ -#define Lsr (0x05*Scale) /* line status register */ -#define Msr (0x06*Scale) /* modem status register */ - -/* Bit Definitions for above ports */ -#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */ -#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */ - -#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */ -#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */ -#define McrDflt (McrRts|McrDtr) - -#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/ - /* b6: transmitter empty */ -#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */ - -#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */ -#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */ -#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */ - -#define IerRda 0xf /* b0: Enable received data available interrupt */ - -#endif - -#endif /* __SERIAL_H__ */