From: Tom Rini <trini@konsulko.com>
Date: Thu, 19 Aug 2021 03:12:27 +0000 (-0400)
Subject: am335x: Drop non-DM_I2C code
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bbd94278d15eee93e271c633e15a3b57595563ac;p=u-boot.git

am335x: Drop non-DM_I2C code

On this platform, we have DM_I2C and SPL_DM_I2C always enabled.  Remove
legacy options.

Signed-off-by: Tom Rini <trini@konsulko.com>
---

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 2e4f3d102b..0e209a5a72 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -79,10 +79,6 @@ void do_board_detect(void)
 {
 	enable_i2c0_pin_mux();
 	enable_i2c2_pin_mux();
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
-	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED2, CONFIG_SYS_OMAP24_I2C_SLAVE2);
-#endif
 	if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
 				 CONFIG_EEPROM_CHIP_ADDRESS))
 		printf("ti_i2c_eeprom_init failed\n");
@@ -339,13 +335,8 @@ static void scale_vcores_bone(int freq)
 	if (board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4))
 		return;
 
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	if (i2c_probe(TPS65217_CHIP_PM))
-		return;
-#else
 	if (power_tps65217_init(0))
 		return;
-#endif
 
 
 	/*
@@ -438,13 +429,8 @@ void scale_vcores_generic(int freq)
 	 * 1.10V.  For MPU voltage we need to switch based on
 	 * the frequency we are running at.
 	 */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	if (i2c_probe(TPS65910_CTRL_I2C_ADDR))
-		return;
-#else
 	if (power_tps65910_init(0))
 		return;
-#endif
 	/*
 	 * Depending on MPU clock and PG we will need a different
 	 * VDD to drive at that speed.
@@ -472,10 +458,6 @@ void gpi2c_init(void)
 
 	if (first_time) {
 		enable_i2c0_pin_mux();
-#if !CONFIG_IS_ENABLED(DM_I2C)
-		i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
-			 CONFIG_SYS_OMAP24_I2C_SLAVE);
-#endif
 		first_time = false;
 	}
 }
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index e450ff64d8..fed737fa09 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -345,14 +345,6 @@ void enable_i2c2_pin_mux(void)
 static unsigned short detect_daughter_board_profile(void)
 {
 	unsigned short val;
-
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	if (i2c_probe(I2C_CPLD_ADDR))
-		return PROFILE_NONE;
-
-	if (i2c_read(I2C_CPLD_ADDR, CFG_REG, 1, (unsigned char *)(&val), 2))
-		return PROFILE_NONE;
-#else
 	struct udevice *dev = NULL;
 	int rc;
 
@@ -362,7 +354,6 @@ static unsigned short detect_daughter_board_profile(void)
 	rc = dm_i2c_read(dev, CFG_REG, (unsigned char *)(&val), 2);
 	if (rc)
 		return PROFILE_NONE;
-#endif
 	return (1 << (val & PROFILE_MASK));
 }