From: Kever Yang Date: Tue, 28 Nov 2017 08:04:15 +0000 (+0800) Subject: rockchip: rk3128: add device tree file X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bbd6e6d729067e155a2f415b4722cbf1b33a71eb;p=u-boot.git rockchip: rk3128: add device tree file Add dts binding header for rk3128, files origin from kernel. Series-Changes: 2 - fix i2c address - add saradc and usb phy node - emmc using fifo mode for there is no dma support in rk3128 emmc - add some clock id in cru.h Signed-off-by: Kever Yang Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9db56f2d9d..1518616bfb 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -29,6 +29,7 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3036-sdk.dtb \ + rk3128-evb.dtb \ rk3188-radxarock.dtb \ rk3288-evb.dtb \ rk3288-fennec.dtb \ diff --git a/arch/arm/dts/rk3128-evb.dts b/arch/arm/dts/rk3128-evb.dts new file mode 100644 index 0000000000..6940af9a5c --- /dev/null +++ b/arch/arm/dts/rk3128-evb.dts @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2017 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "rk3128.dtsi" + +/ { + model = "Rockchip RK3128 Evaluation board"; + compatible = "rockchip,rk3128-evb", "rockchip,rk3128"; + + chosen { + stdout-path = &uart2; + }; + + vcc5v0_otg: vcc5v0-otg-drv { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_otg"; + gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_host: vcc5v0-host-drv { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&i2c1 { + status = "okay"; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb_otg { + vbus-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +&emmc { + fifo-mode; + status = "okay"; +}; + +&pinctrl { + usb_otg { + otg_vbus_drv: host-vbus-drv { + rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_host { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/dts/rk3128.dtsi b/arch/arm/dts/rk3128.dtsi new file mode 100644 index 0000000000..3ef2737f5b --- /dev/null +++ b/arch/arm/dts/rk3128.dtsi @@ -0,0 +1,804 @@ +/* + * (C) Copyright 2017 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include "skeleton.dtsi" + +/ { + compatible = "rockchip,rk3128"; + rockchip,sram = <&sram>; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + spi0 = &spi0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + mmc0 = &emmc; + mmc1 = &sdmmc; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + , + ; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "rockchip,rk3128-smp"; + + cpu0:cpu@0x000 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x000>; + operating-points = < + /* KHz uV */ + 816000 1000000 + >; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + }; + + cpu1:cpu@0x001 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x001>; + }; + + cpu2:cpu@0x002 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x002>; + }; + + cpu3:cpu@0x003 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x003>; + }; + }; + + cpu_axi_bus: cpu_axi_bus { + compatible = "rockchip,cpu_axi_bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + qos { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + crypto { + reg = <0x10128080 0x20>; + }; + + core { + reg = <0x1012a000 0x20>; + }; + + peri { + reg = <0x1012c000 0x20>; + }; + + gpu { + reg = <0x1012d000 0x20>; + }; + + vpu { + reg = <0x1012e000 0x20>; + }; + + rga { + reg = <0x1012f000 0x20>; + }; + ebc { + reg = <0x1012f080 0x20>; + }; + + iep { + reg = <0x1012f100 0x20>; + }; + + lcdc { + reg = <0x1012f180 0x20>; + rockchip,priority = <3 3>; + }; + + vip { + reg = <0x1012f200 0x20>; + rockchip,priority = <3 3>; + }; + }; + + msch { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + msch@10128000 { + reg = <0x10128000 0x20>; + rockchip,read-latency = <0x3f>; + }; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + migrate = <0x84000005>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + pdma: pdma@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + arm,pl330-broken-no-flushp;//2 + interrupts = , + ; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + xin12m: xin12m { + compatible = "fixed-clock"; + clocks = <&xin24m>; + clock-frequency = <12000000>; + clock-output-names = "xin12m"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; + interrupts = , + ; + clock-frequency = <24000000>; + }; + + timer@20044000 { + compatible = "arm,armv7-timer"; + reg = <0x20044000 0xb8>; + interrupts = ; + rockchip,broadcast = <1>; + }; + + watchdog: wdt@2004c000 { + compatible = "rockchip,watch dog"; + reg = <0x2004c000 0x100>; + clock-names = "pclk_wdt"; + interrupts = ; + rockchip,irq = <1>; + rockchip,timeout = <60>; + rockchip,atboot = <1>; + rockchip,debug = <0>; + }; + + reset: reset@20000110 { + compatible = "rockchip,reset"; + reg = <0x20000110 0x24>; + #reset-cells = <1>; + }; + + nandc: nandc@10500000 { + compatible = "rockchip,rk-nandc"; + reg = <0x10500000 0x4000>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&nandc_ale &nandc_cle &nandc_wrn &nandc_rdn &nandc_rdy &nandc_cs0 &nandc_data>; + nandc_id = <0>; + clocks = <&cru SCLK_NANDC>, + <&cru HCLK_NANDC>, + <&cru SRST_NANDC>; + clock-names = "clk_nandc", "g_clk_nandc", "hclk_nandc"; + }; + + dmc: dmc@20004000 { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3128-dmc", "syscon"; + reg = <0x0 0x20004000 0x0 0x1000>; + }; + + cru: clock-controller@20000000 { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3128-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>; + assigned-clock-rates = <594000000>; + }; + + uart0: serial0@20060000 { + compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; + reg = <0x20060000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + dmas = <&pdma 2>, <&pdma 3>; + #dma-cells = <2>; + }; + + uart1: serial1@20064000 { + compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; + reg = <0x20064000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + dmas = <&pdma 4>, <&pdma 5>; + #dma-cells = <2>; + }; + + uart2: serial2@20068000 { + compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; + reg = <0x20068000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + dmas = <&pdma 6>, <&pdma 7>; + #dma-cells = <2>; + }; + + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = ; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + pwm0: pwm0@20050000 { + compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; + reg = <0x20050000 0x10>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + }; + + pwm1: pwm1@20050010 { + compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; + reg = <0x20050010 0x10>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + }; + + pwm2: pwm2@20050020 { + compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; + reg = <0x20050020 0x10>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + }; + + pwm3: pwm3@20050030 { + compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; + reg = <0x20050030 0x10>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + }; + + sram: sram@10080400 { + compatible = "rockchip,rk3128-smp-sram", "mmio-sram"; + reg = <0x10080400 0x1C00>; + map-exec; + map-cacheable; + }; + + pmu: syscon@100a0000 { + compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd"; + reg = <0x100a0000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gic: interrupt-controller@10139000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + reg = <0x10139000 0x1000>, + <0x1013a000 0x1000>, + <0x1013c000 0x2000>, + <0x1013e000 0x2000>; + interrupts = ; + }; + + u2phy: usb2-phy { + compatible = "rockchip,rk3128-usb2phy"; + reg = <0x017c 0x0c>; + rockchip,grf = <&grf>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usb480m_phy"; + #phy-cells = <1>; + status = "disabled"; + + u2phy_otg: otg-port { + #phy-cells = <0>; + interrupts = , + , + ; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + + u2phy_host: host-port { + #phy-cells = <0>; + interrupts = ; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; + + usb_otg: usb@10180000 { + compatible = "rockchip,rk3128-usb", "rockchip,rk3288-usb", + "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = ; + dr_mode = "otg"; + g-use-dma; + hnp-srp-disable; + phys = <&u2phy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host_ehci: usb@101c0000 { + compatible = "generic-ehci"; + reg = <0x101c0000 0x20000>; + interrupts = ; + phys = <&u2phy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host_ohci: usb@101e0000 { + compatible = "generic-ohci"; + reg = <0x101e0000 0x20000>; + interrupts = ; + phys = <&u2phy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + sdmmc: dwmmc@10214000 { + compatible = "rockchip,rk312x-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x10214000 0x4000>; + max-frequency = <150000000>; + interrupts = ; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + bus-width = <4>; + status = "disabled"; + }; + + emmc: dwmmc@1021c000 { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x1021c000 0x4000>; + max-frequency = <150000000>; + interrupts = ; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + bus-width = <8>; + default-sample-phase = <158>; + num-slots = <1>; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; + status = "disabled"; + }; + + i2c0: i2c0@20072000 { + compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; + reg = <20072000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + }; + + i2c1: i2c1@20056000 { + compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; + reg = <0x20056000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + }; + + i2c2: i2c2@2005a000 { + compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; + reg = <0x2005a000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + }; + + i2c3: i2c3@2005e000 { + compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; + reg = <0x2005e000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + }; + + spi0: spi@20074000 { + compatible = "rockchip,rk3128-spi", "rockchip,rk3288-spi"; + reg = <0x20074000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_txd_mux0 &spi0_rxd_mux0 &spi0_clk_mux0 &spi0_cs0_mux0 &spi0_cs1_mux0>; + rockchip,spi-src-clk = <0>; + num-cs = <2>; + clocks =<&cru SCLK_SPI>, <&cru PCLK_SPI>; + clock-names = "spi","pclk_spi0"; + dmas = <&pdma 8>, <&pdma 9>; + #dma-cells = <2>; + dma-names = "tx", "rx"; + }; + + grf: syscon@20008000 { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3128-grf", "syscon"; + reg = <0x20008000 0x1000>; + }; + + pinctrl: pinctrl@20008000 { + compatible = "rockchip,rk3128-pinctrl"; + reg = <0x20008000 0xA8>, + <0x200080A8 0x4C>, + <0x20008118 0x20>, + <0x20008100 0x04>; + reg-names = "base", "mux", "pull", "drv"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@2007c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2007c000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@20084000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20084000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio2@20088000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20088000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + emmc { + /* + * We run eMMC at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + + emmc_clk: emmc-clk { + rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = <2 5 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, + <1 25 RK_FUNC_2 &pcfg_pull_none>, + <1 26 RK_FUNC_2 &pcfg_pull_none>, + <1 27 RK_FUNC_2 &pcfg_pull_none>, + <1 28 RK_FUNC_2 &pcfg_pull_none>, + <1 29 RK_FUNC_2 &pcfg_pull_none>, + <1 30 RK_FUNC_2 &pcfg_pull_none>, + <1 31 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + nandc{ + nandc_ale:nandc-ale { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + nandc_cle:nandc-cle { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + nandc_wrn:nandc-wrn { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + nandc_rdn:nandc-rdn { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + nandc_rdy:nandc-rdy { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + nandc_cs0:nandc-cs0 { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + nandc_data: nandc-data { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>, + <0 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>, + <2 23 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>, + <1 19 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <1 RK_PC1 1 &pcfg_pull_up>; + }; + + sdmmc_wp: sdmmc-wp { + rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up>; + }; + + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up>, + <1 RK_PC3 1 &pcfg_pull_up>, + <1 RK_PC4 1 &pcfg_pull_up>, + <1 RK_PC5 1 &pcfg_pull_up>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <0 1 2 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <0 27 1 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, + <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, + <0 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <2 20 3 &pcfg_pull_none>, + <2 21 3 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, + <0 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_txd_mux0:spi0-txd-mux0 { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + spi0_rxd_mux0:spi0-rxd-mux0 { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + spi0_clk_mux0:spi0-clk-mux0 { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + spi0_cs0_mux0:spi0-cs0-mux0 { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + spi0_cs1_mux0:spi0-cs1-mux0 { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + }; +}; diff --git a/include/dt-bindings/clock/rk3128-cru.h b/include/dt-bindings/clock/rk3128-cru.h new file mode 100644 index 0000000000..476268a78b --- /dev/null +++ b/include/dt-bindings/clock/rk3128-cru.h @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2017 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H +#define _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H + +/* core clocks */ +#define PLL_APLL 1 +#define PLL_DPLL 2 +#define PLL_GPLL 3 +#define ARMCLK 4 + +/* sclk gates (special clocks) */ +#define SCLK_GPU 64 +#define SCLK_SPI 65 +#define SCLK_SDMMC 68 +#define SCLK_SDIO 69 +#define SCLK_EMMC 71 +#define SCLK_NANDC 76 +#define SCLK_UART0 77 +#define SCLK_UART1 78 +#define SCLK_UART2 79 +#define SCLK_I2S 82 +#define SCLK_SPDIF 83 +#define SCLK_TIMER0 85 +#define SCLK_TIMER1 86 +#define SCLK_TIMER2 87 +#define SCLK_TIMER3 88 +#define SCLK_SARADC 91 +#define SCLK_OTGPHY0 93 +#define SCLK_LCDC 100 +#define SCLK_HDMI 109 +#define SCLK_HEVC 111 +#define SCLK_I2S_OUT 113 +#define SCLK_SDMMC_DRV 114 +#define SCLK_SDIO_DRV 115 +#define SCLK_EMMC_DRV 117 +#define SCLK_SDMMC_SAMPLE 118 +#define SCLK_SDIO_SAMPLE 119 +#define SCLK_EMMC_SAMPLE 121 +#define SCLK_PVTM_CORE 123 +#define SCLK_PVTM_GPU 124 +#define SCLK_PVTM_VIDEO 125 +#define SCLK_MAC 151 +#define SCLK_MACREF 152 +#define SCLK_SFC 160 + +#define DCLK_LCDC 190 + +/* aclk gates */ +#define ACLK_DMAC2 194 +#define ACLK_VIO0 197 +#define ACLK_VIO1 203 +#define ACLK_VCODEC 208 +#define ACLK_CPU 209 +#define ACLK_PERI 210 + +/* pclk gates */ +#define PCLK_SARADC 318 +#define PCLK_GPIO0 320 +#define PCLK_GPIO1 321 +#define PCLK_GPIO2 322 +#define PCLK_GPIO3 323 +#define PCLK_GRF 329 +#define PCLK_I2C0 332 +#define PCLK_I2C1 333 +#define PCLK_I2C2 334 +#define PCLK_I2C3 335 +#define PCLK_SPI 338 +#define PCLK_UART0 341 +#define PCLK_UART1 342 +#define PCLK_UART2 343 +#define PCLK_PWM 350 +#define PCLK_TIMER 353 +#define PCLK_HDMI 360 +#define PCLK_CPU 362 +#define PCLK_PERI 363 +#define PCLK_DDRUPCTL 364 +#define PCLK_WDT 368 + +/* hclk gates */ +#define HCLK_OTG0 449 +#define HCLK_OTG1 450 +#define HCLK_NANDC 453 +#define HCLK_SDMMC 456 +#define HCLK_SDIO 457 +#define HCLK_EMMC 459 +#define HCLK_I2S 462 +#define HCLK_LCDC 465 +#define HCLK_ROM 467 +#define HCLK_VIO_BUS 472 +#define HCLK_VCODEC 476 +#define HCLK_CPU 477 +#define HCLK_PERI 478 + +#define CLK_NR_CLKS (HCLK_PERI + 1) + +/* soft-reset indices */ +#define SRST_CORE0 0 +#define SRST_CORE1 1 +#define SRST_CORE0_DBG 4 +#define SRST_CORE1_DBG 5 +#define SRST_CORE0_POR 8 +#define SRST_CORE1_POR 9 +#define SRST_L2C 12 +#define SRST_TOPDBG 13 +#define SRST_STRC_SYS_A 14 +#define SRST_PD_CORE_NIU 15 + +#define SRST_TIMER2 16 +#define SRST_CPUSYS_H 17 +#define SRST_AHB2APB_H 19 +#define SRST_TIMER3 20 +#define SRST_INTMEM 21 +#define SRST_ROM 22 +#define SRST_PERI_NIU 23 +#define SRST_I2S 24 +#define SRST_DDR_PLL 25 +#define SRST_GPU_DLL 26 +#define SRST_TIMER0 27 +#define SRST_TIMER1 28 +#define SRST_CORE_DLL 29 +#define SRST_EFUSE_P 30 +#define SRST_ACODEC_P 31 + +#define SRST_GPIO0 32 +#define SRST_GPIO1 33 +#define SRST_GPIO2 34 +#define SRST_UART0 39 +#define SRST_UART1 40 +#define SRST_UART2 41 +#define SRST_I2C0 43 +#define SRST_I2C1 44 +#define SRST_I2C2 45 +#define SRST_SFC 47 + +#define SRST_PWM0 48 +#define SRST_DAP 51 +#define SRST_DAP_SYS 52 +#define SRST_GRF 55 +#define SRST_PERIPHSYS_A 57 +#define SRST_PERIPHSYS_H 58 +#define SRST_PERIPHSYS_P 59 +#define SRST_CPU_PERI 61 +#define SRST_EMEM_PERI 62 +#define SRST_USB_PERI 63 + +#define SRST_DMA2 64 +#define SRST_MAC 66 +#define SRST_NANDC 68 +#define SRST_USBOTG0 69 +#define SRST_OTGC0 71 +#define SRST_USBOTG1 72 +#define SRST_OTGC1 74 +#define SRST_DDRMSCH 79 + +#define SRST_MMC0 81 +#define SRST_SDIO 82 +#define SRST_EMMC 83 +#define SRST_SPI0 84 +#define SRST_WDT 86 +#define SRST_SARADC 87 +#define SRST_DDRPHY 88 +#define SRST_DDRPHY_P 89 +#define SRST_DDRCTRL 90 +#define SRST_DDRCTRL_P 91 + +#define SRST_HDMI_P 96 +#define SRST_VIO_BUS_H 99 +#define SRST_UTMI0 103 +#define SRST_UTMI1 104 +#define SRST_USBPOR 105 + +#define SRST_VCODEC_A 112 +#define SRST_VCODEC_H 113 +#define SRST_VIO1_A 114 +#define SRST_HEVC 115 +#define SRST_VCODEC_NIU_A 116 +#define SRST_LCDC1_A 117 +#define SRST_LCDC1_H 118 +#define SRST_LCDC1_D 119 +#define SRST_GPU 120 +#define SRST_GPU_NIU_A 122 + +#define SRST_DBG_P 131 + +#endif