From: Adam Ford Date: Fri, 6 Jul 2018 01:58:24 +0000 (-0500) Subject: imx: i.mx6q: imx6q_logic: Migrate to SPL and enable SDP X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bbbb50f9fdec4bee5a0ae0238100a57b09a4b719;p=u-boot.git imx: i.mx6q: imx6q_logic: Migrate to SPL and enable SDP Since the vast majority of i.MX6 boards are migrating to SPL, this patch converts im6q_logic to SPL and enables the SDP for loading SPL and u-boot.img over USB. The Falcon mode only supports NAND flash as of now due to limited space/RAM, but all i.MX6D/Q SOM's from Logic PD have internal NAND from which to boot. Signed-off-by: Adam Ford --- diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 3c87ece625..d4bc60af45 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -205,6 +205,8 @@ config TARGET_MX6CUBOXI config TARGET_MX6LOGICPD bool "Logic PD i.MX6 SOM" + select MX6Q + select SUPPORT_SPL select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select DM @@ -213,7 +215,6 @@ config TARGET_MX6LOGICPD select DM_I2C select DM_MMC select DM_PMIC - select DM_REGULATOR select OF_CONTROL config TARGET_MX6MEMCAL diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c index 84405635a5..ce1c8a5d6b 100644 --- a/board/logicpd/imx6/imx6logic.c +++ b/board/logicpd/imx6/imx6logic.c @@ -182,3 +182,144 @@ int board_late_init(void) return 0; } + +#ifdef CONFIG_SPL_BUILD +#include +#include +#include +#include + +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + + return 0; +} +#endif + +static void ccgr_init(void) +{ + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + writel(0x00C03F3F, &ccm->CCGR0); + writel(0x0030FC03, &ccm->CCGR1); + writel(0x0FFFC000, &ccm->CCGR2); + writel(0x3FF00000, &ccm->CCGR3); + writel(0xFFFFF300, &ccm->CCGR4); + writel(0x0F0000F3, &ccm->CCGR5); + writel(0x00000FFF, &ccm->CCGR6); +} + +static int mx6q_dcd_table[] = { + MX6_IOM_GRP_DDR_TYPE, 0x000C0000, + MX6_IOM_GRP_DDRPKE, 0x00000000, + MX6_IOM_DRAM_SDCLK_0, 0x00000030, + MX6_IOM_DRAM_SDCLK_1, 0x00000030, + MX6_IOM_DRAM_CAS, 0x00000030, + MX6_IOM_DRAM_RAS, 0x00000030, + MX6_IOM_GRP_ADDDS, 0x00000030, + MX6_IOM_DRAM_RESET, 0x00000030, + MX6_IOM_DRAM_SDBA2, 0x00000000, + MX6_IOM_DRAM_SDODT0, 0x00000030, + MX6_IOM_DRAM_SDODT1, 0x00000030, + MX6_IOM_GRP_CTLDS, 0x00000030, + MX6_IOM_DDRMODE_CTL, 0x00020000, + MX6_IOM_DRAM_SDQS0, 0x00000030, + MX6_IOM_DRAM_SDQS1, 0x00000030, + MX6_IOM_DRAM_SDQS2, 0x00000030, + MX6_IOM_DRAM_SDQS3, 0x00000030, + MX6_IOM_GRP_DDRMODE, 0x00020000, + MX6_IOM_GRP_B0DS, 0x00000030, + MX6_IOM_GRP_B1DS, 0x00000030, + MX6_IOM_GRP_B2DS, 0x00000030, + MX6_IOM_GRP_B3DS, 0x00000030, + MX6_IOM_DRAM_DQM0, 0x00000030, + MX6_IOM_DRAM_DQM1, 0x00000030, + MX6_IOM_DRAM_DQM2, 0x00000030, + MX6_IOM_DRAM_DQM3, 0x00000030, + MX6_MMDC_P0_MDSCR, 0x00008000, + MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003, + MX6_MMDC_P0_MPWLDECTRL0, 0x002D003A, + MX6_MMDC_P0_MPWLDECTRL1, 0x0038002B, + MX6_MMDC_P0_MPDGCTRL0, 0x03340338, + MX6_MMDC_P0_MPDGCTRL1, 0x0334032C, + MX6_MMDC_P0_MPRDDLCTL, 0x4036383C, + MX6_MMDC_P0_MPWRDLCTL, 0x2E384038, + MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333, + MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333, + MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333, + MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333, + MX6_MMDC_P0_MPMUR0, 0x00000800, + MX6_MMDC_P0_MDPDC, 0x00020036, + MX6_MMDC_P0_MDOTC, 0x09444040, + MX6_MMDC_P0_MDCFG0, 0xB8BE7955, + MX6_MMDC_P0_MDCFG1, 0xFF328F64, + MX6_MMDC_P0_MDCFG2, 0x01FF00DB, + MX6_MMDC_P0_MDMISC, 0x00011740, + MX6_MMDC_P0_MDSCR, 0x00008000, + MX6_MMDC_P0_MDRWD, 0x000026D2, + MX6_MMDC_P0_MDOR, 0x00BE1023, + MX6_MMDC_P0_MDASP, 0x00000047, + MX6_MMDC_P0_MDCTL, 0x85190000, + MX6_MMDC_P0_MDSCR, 0x00888032, + MX6_MMDC_P0_MDSCR, 0x00008033, + MX6_MMDC_P0_MDSCR, 0x00008031, + MX6_MMDC_P0_MDSCR, 0x19408030, + MX6_MMDC_P0_MDSCR, 0x04008040, + MX6_MMDC_P0_MDREF, 0x00007800, + MX6_MMDC_P0_MPODTCTRL, 0x00000007, + MX6_MMDC_P0_MDPDC, 0x00025576, + MX6_MMDC_P0_MAPSR, 0x00011006, + MX6_MMDC_P0_MDSCR, 0x00000000, + /* enable AXI cache for VDOA/VPU/IPU */ + + MX6_IOMUXC_GPR4, 0xF00000CF, + /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ + MX6_IOMUXC_GPR6, 0x007F007F, + MX6_IOMUXC_GPR7, 0x007F007F, +}; + +static void ddr_init(int *table, int size) +{ + int i; + + for (i = 0; i < size / 2 ; i++) + writel(table[2 * i + 1], table[2 * i]); +} + +static void spl_dram_init(void) +{ + if (is_mx6dq()) + ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table)); +} + +void board_init_f(ulong dummy) +{ + /* DDR initialization */ + spl_dram_init(); + + /* setup AIPS and disable watchdog */ + arch_cpu_init(); + + ccgr_init(); + gpr_init(); + + /* iomux and setup of uart and NAND pins */ + board_early_init_f(); + + /* setup GP timer */ + timer_init(); + + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + /* load/boot image from boot device */ + board_init_r(NULL, 0); +} +#endif diff --git a/board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg b/board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg deleted file mode 100644 index 6d7e29d627..0000000000 --- a/board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017 Logic PD, Inc. - * Adam Ford - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -#include - -/* image version */ -IMAGE_VERSION 2 - -BOOT_OFFSET FLASH_OFFSET_STANDARD - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ - -#define __ASSEMBLY__ -#include -#include "asm/arch-mx6/mx6-ddr.h" -#include "asm/arch-mx6/iomux.h" -#include "asm/arch-mx6/crm_regs.h" - -DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 -DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000030 -DATA 4, MX6_IOM_DRAM_CAS, 0x00000030 -DATA 4, MX6_IOM_DRAM_RAS, 0x00000030 -DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 -DATA 4, MX6_IOM_DRAM_RESET, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000030 -DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 -DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 -DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 -DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 -DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030 -DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002D003A -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0038002B -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x03340338 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0334032C -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4036383C -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x2E384038 -DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 -DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 -DATA 4, MX6_MMDC_P0_MDCFG0, 0xB8BE7955 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64 -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -DATA 4, MX6_MMDC_P0_MDMISC, 0x00011740 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -DATA 4, MX6_MMDC_P0_MDOR, 0x00BE1023 -DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 -DATA 4, MX6_MMDC_P0_MDCTL, 0x85190000 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00888032 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008031 -DATA 4, MX6_MMDC_P0_MDSCR, 0x19408030 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007 -DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 - -/* set the default clock gate to save power */ -DATA 4, CCM_CCGR0, 0x00C03F3F -DATA 4, CCM_CCGR1, 0x0030FC03 -DATA 4, CCM_CCGR2, 0x0FFFC000 -DATA 4, CCM_CCGR3, 0x3FF00000 -DATA 4, CCM_CCGR4, 0xFFFFF300 -DATA 4, CCM_CCGR5, 0x0F0000F3 -DATA 4, CCM_CCGR6, 0x00000FFF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4 MX6_IOMUXC_GPR4 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4 MX6_IOMUXC_GPR6 0x007F007F -DATA 4 MX6_IOMUXC_GPR7 0x007F007F diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index f0974bfa15..7d921cde05 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -1,39 +1,74 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_MX6LOGICPD=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 +CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd" CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg,MX6Q" +CONFIG_TPL_SYS_MALLOC_F_LEN=0x400 +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=3 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_DMA_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET_SUPPORT=y +CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_PROMPT="i.MX6 Logic # " +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_CACHE=y +# CONFIG_CMD_LED is not set CONFIG_CMD_PMIC=y -CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:4m(uboot),1m(env),16m(kernel),1m(dtb),-(fs)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),16m(kernel),1m(dtb),-(fs)" +CONFIG_CMD_UBI=y +CONFIG_SPL_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SPL_DM=y +CONFIG_PCF8575_GPIO=y CONFIG_SYS_I2C_MXC=y +CONFIG_LED=y +CONFIG_LED_GPIO=y CONFIG_FSL_ESDHC=y CONFIG_NAND=y CONFIG_NAND_MXS=y CONFIG_PHYLIB=y -CONFIG_PHY_SMSC=y +CONFIG_PHY_ATHEROS=y CONFIG_FEC_MXC=y CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_PMIC_PFUZE100=y -CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_MXC_UART=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 0226510b2e..40eb84cbbd 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -11,6 +11,10 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONSOLE_DEV "ttymxc0" +#ifdef CONFIG_SPL +#include "imx6_spl.h" +#endif + #include "mx6_common.h" /* Size of malloc() pool */ @@ -132,7 +136,7 @@ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Environment organization */ -#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_SIZE (1024 * 1024) #define CONFIG_ENV_OFFSET 0x400000 #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE @@ -143,7 +147,7 @@ #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 - +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00500000 /* MTD device */ # define CONFIG_MTD_DEVICE # define CONFIG_MTD_PARTITIONS @@ -153,4 +157,22 @@ /* EEPROM contains serial no, MAC addr and other Logic PD info */ #define CONFIG_I2C_EEPROM +/* USB Configs */ +#ifdef CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */ +#endif + +/* Falcon Mode */ +#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" +#define CONFIG_SYS_SPL_ARGS_ADDR 0x15000000 + +/* Falcon Mode - MMC support: args@1MB kernel@2MB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ + #endif /* __IMX6LOGIC_CONFIG_H */