From: Simon Glass Date: Tue, 25 Nov 2014 04:18:16 +0000 (-0700) Subject: x86: Add init for model 206AX CPU X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bb80be391693a868c2114d1a9505c45dce7a3607;p=u-boot.git x86: Add init for model 206AX CPU Add the setup code for the CPU so that it can be used at full speed. Signed-off-by: Simon Glass --- diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile index aedc3954a8..95491b5a46 100644 --- a/arch/x86/cpu/ivybridge/Makefile +++ b/arch/x86/cpu/ivybridge/Makefile @@ -11,6 +11,7 @@ obj-y += early_init.o obj-y += early_me.o obj-y += lpc.o obj-y += me_status.o +obj-y += model_206ax.o obj-y += microcode_intel.o obj-y += pch.o obj-y += pci.o diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c index 1fcbc28543..1a3c036850 100644 --- a/arch/x86/cpu/ivybridge/bd82x6x.c +++ b/arch/x86/cpu/ivybridge/bd82x6x.c @@ -90,6 +90,7 @@ int bd82x6x_init_pci_devices(void) { const void *blob = gd->fdt_blob; struct pci_controller *hose; + struct x86_cpu_priv *cpu; int sata_node; hose = pci_bus_to_hose(0); @@ -105,6 +106,11 @@ int bd82x6x_init_pci_devices(void) bd82x6x_usb_ehci_init(PCH_EHCI1_DEV); bd82x6x_usb_ehci_init(PCH_EHCI2_DEV); + cpu = calloc(1, sizeof(*cpu)); + if (!cpu) + return -ENOMEM; + model_206ax_init(cpu); + return 0; } diff --git a/arch/x86/cpu/ivybridge/model_206ax.c b/arch/x86/cpu/ivybridge/model_206ax.c new file mode 100644 index 0000000000..11dc625da9 --- /dev/null +++ b/arch/x86/cpu/ivybridge/model_206ax.c @@ -0,0 +1,514 @@ +/* + * From Coreboot file of same name + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The Chromium Authors + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void enable_vmx(void) +{ + struct cpuid_result regs; +#ifdef CONFIG_ENABLE_VMX + int enable = true; +#else + int enable = false; +#endif + msr_t msr; + + regs = cpuid(1); + /* Check that the VMX is supported before reading or writing the MSR. */ + if (!((regs.ecx & CPUID_VMX) || (regs.ecx & CPUID_SMX))) + return; + + msr = msr_read(MSR_IA32_FEATURE_CONTROL); + + if (msr.lo & (1 << 0)) { + debug("VMX is locked, so %s will do nothing\n", __func__); + /* VMX locked. If we set it again we get an illegal + * instruction + */ + return; + } + + /* The IA32_FEATURE_CONTROL MSR may initialize with random values. + * It must be cleared regardless of VMX config setting. + */ + msr.hi = 0; + msr.lo = 0; + + debug("%s VMX\n", enable ? "Enabling" : "Disabling"); + + /* + * Even though the Intel manual says you must set the lock bit in + * addition to the VMX bit in order for VMX to work, it is incorrect. + * Thus we leave it unlocked for the OS to manage things itself. + * This is good for a few reasons: + * - No need to reflash the bios just to toggle the lock bit. + * - The VMX bits really really should match each other across cores, + * so hard locking it on one while another has the opposite setting + * can easily lead to crashes as code using VMX migrates between + * them. + * - Vendors that want to "upsell" from a bios that disables+locks to + * one that doesn't is sleazy. + * By leaving this to the OS (e.g. Linux), people can do exactly what + * they want on the fly, and do it correctly (e.g. across multiple + * cores). + */ + if (enable) { + msr.lo |= (1 << 2); + if (regs.ecx & CPUID_SMX) + msr.lo |= (1 << 1); + } + + msr_write(MSR_IA32_FEATURE_CONTROL, msr); +} + +/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ +static const u8 power_limit_time_sec_to_msr[] = { + [0] = 0x00, + [1] = 0x0a, + [2] = 0x0b, + [3] = 0x4b, + [4] = 0x0c, + [5] = 0x2c, + [6] = 0x4c, + [7] = 0x6c, + [8] = 0x0d, + [10] = 0x2d, + [12] = 0x4d, + [14] = 0x6d, + [16] = 0x0e, + [20] = 0x2e, + [24] = 0x4e, + [28] = 0x6e, + [32] = 0x0f, + [40] = 0x2f, + [48] = 0x4f, + [56] = 0x6f, + [64] = 0x10, + [80] = 0x30, + [96] = 0x50, + [112] = 0x70, + [128] = 0x11, +}; + +/* Convert POWER_LIMIT_1_TIME MSR value to seconds */ +static const u8 power_limit_time_msr_to_sec[] = { + [0x00] = 0, + [0x0a] = 1, + [0x0b] = 2, + [0x4b] = 3, + [0x0c] = 4, + [0x2c] = 5, + [0x4c] = 6, + [0x6c] = 7, + [0x0d] = 8, + [0x2d] = 10, + [0x4d] = 12, + [0x6d] = 14, + [0x0e] = 16, + [0x2e] = 20, + [0x4e] = 24, + [0x6e] = 28, + [0x0f] = 32, + [0x2f] = 40, + [0x4f] = 48, + [0x6f] = 56, + [0x10] = 64, + [0x30] = 80, + [0x50] = 96, + [0x70] = 112, + [0x11] = 128, +}; + +int cpu_config_tdp_levels(void) +{ + struct cpuid_result result; + msr_t platform_info; + + /* Minimum CPU revision */ + result = cpuid(1); + if (result.eax < IVB_CONFIG_TDP_MIN_CPUID) + return 0; + + /* Bits 34:33 indicate how many levels supported */ + platform_info = msr_read(MSR_PLATFORM_INFO); + return (platform_info.hi >> 1) & 3; +} + +/* + * Configure processor power limits if possible + * This must be done AFTER set of BIOS_RESET_CPL + */ +void set_power_limits(u8 power_limit_1_time) +{ + msr_t msr = msr_read(MSR_PLATFORM_INFO); + msr_t limit; + unsigned power_unit; + unsigned tdp, min_power, max_power, max_time; + u8 power_limit_1_val; + + if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr)) + return; + + if (!(msr.lo & PLATFORM_INFO_SET_TDP)) + return; + + /* Get units */ + msr = msr_read(MSR_PKG_POWER_SKU_UNIT); + power_unit = 2 << ((msr.lo & 0xf) - 1); + + /* Get power defaults for this SKU */ + msr = msr_read(MSR_PKG_POWER_SKU); + tdp = msr.lo & 0x7fff; + min_power = (msr.lo >> 16) & 0x7fff; + max_power = msr.hi & 0x7fff; + max_time = (msr.hi >> 16) & 0x7f; + + debug("CPU TDP: %u Watts\n", tdp / power_unit); + + if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) + power_limit_1_time = power_limit_time_msr_to_sec[max_time]; + + if (min_power > 0 && tdp < min_power) + tdp = min_power; + + if (max_power > 0 && tdp > max_power) + tdp = max_power; + + power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; + + /* Set long term power limit to TDP */ + limit.lo = 0; + limit.lo |= tdp & PKG_POWER_LIMIT_MASK; + limit.lo |= PKG_POWER_LIMIT_EN; + limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << + PKG_POWER_LIMIT_TIME_SHIFT; + + /* Set short term power limit to 1.25 * TDP */ + limit.hi = 0; + limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; + limit.hi |= PKG_POWER_LIMIT_EN; + /* Power limit 2 time is only programmable on SNB EP/EX */ + + msr_write(MSR_PKG_POWER_LIMIT, limit); + + /* Use nominal TDP values for CPUs with configurable TDP */ + if (cpu_config_tdp_levels()) { + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + limit.hi = 0; + limit.lo = msr.lo & 0xff; + msr_write(MSR_TURBO_ACTIVATION_RATIO, limit); + } +} + +static void configure_c_states(void) +{ + struct cpuid_result result; + msr_t msr; + + msr = msr_read(MSR_PMG_CST_CONFIG_CTL); + msr.lo |= (1 << 28); /* C1 Auto Undemotion Enable */ + msr.lo |= (1 << 27); /* C3 Auto Undemotion Enable */ + msr.lo |= (1 << 26); /* C1 Auto Demotion Enable */ + msr.lo |= (1 << 25); /* C3 Auto Demotion Enable */ + msr.lo &= ~(1 << 10); /* Disable IO MWAIT redirection */ + msr.lo |= 7; /* No package C-state limit */ + msr_write(MSR_PMG_CST_CONFIG_CTL, msr); + + msr = msr_read(MSR_PMG_IO_CAPTURE_ADR); + msr.lo &= ~0x7ffff; + msr.lo |= (PMB0_BASE + 4); /* LVL_2 base address */ + msr.lo |= (2 << 16); /* CST Range: C7 is max C-state */ + msr_write(MSR_PMG_IO_CAPTURE_ADR, msr); + + msr = msr_read(MSR_MISC_PWR_MGMT); + msr.lo &= ~(1 << 0); /* Enable P-state HW_ALL coordination */ + msr_write(MSR_MISC_PWR_MGMT, msr); + + msr = msr_read(MSR_POWER_CTL); + msr.lo |= (1 << 18); /* Enable Energy Perf Bias MSR 0x1b0 */ + msr.lo |= (1 << 1); /* C1E Enable */ + msr.lo |= (1 << 0); /* Bi-directional PROCHOT# */ + msr_write(MSR_POWER_CTL, msr); + + /* C3 Interrupt Response Time Limit */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | 0x50; + msr_write(MSR_PKGC3_IRTL, msr); + + /* C6 Interrupt Response Time Limit */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | 0x68; + msr_write(MSR_PKGC6_IRTL, msr); + + /* C7 Interrupt Response Time Limit */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | 0x6D; + msr_write(MSR_PKGC7_IRTL, msr); + + /* Primary Plane Current Limit */ + msr = msr_read(MSR_PP0_CURRENT_CONFIG); + msr.lo &= ~0x1fff; + msr.lo |= PP0_CURRENT_LIMIT; + msr_write(MSR_PP0_CURRENT_CONFIG, msr); + + /* Secondary Plane Current Limit */ + msr = msr_read(MSR_PP1_CURRENT_CONFIG); + msr.lo &= ~0x1fff; + result = cpuid(1); + if (result.eax >= 0x30600) + msr.lo |= PP1_CURRENT_LIMIT_IVB; + else + msr.lo |= PP1_CURRENT_LIMIT_SNB; + msr_write(MSR_PP1_CURRENT_CONFIG, msr); +} + +static int configure_thermal_target(void) +{ + int tcc_offset; + msr_t msr; + int node; + + /* Find pointer to CPU configuration */ + node = fdtdec_next_compatible(gd->fdt_blob, 0, + COMPAT_INTEL_MODEL_206AX); + if (node < 0) + return -ENOENT; + tcc_offset = fdtdec_get_int(gd->fdt_blob, node, "tcc-offset", 0); + + /* Set TCC activaiton offset if supported */ + msr = msr_read(MSR_PLATFORM_INFO); + if ((msr.lo & (1 << 30)) && tcc_offset) { + msr = msr_read(MSR_TEMPERATURE_TARGET); + msr.lo &= ~(0xf << 24); /* Bits 27:24 */ + msr.lo |= (tcc_offset & 0xf) << 24; + msr_write(MSR_TEMPERATURE_TARGET, msr); + } + + return 0; +} + +static void configure_misc(void) +{ + msr_t msr; + + msr = msr_read(IA32_MISC_ENABLE); + msr.lo |= (1 << 0); /* Fast String enable */ + msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ + msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ + msr_write(IA32_MISC_ENABLE, msr); + + /* Disable Thermal interrupts */ + msr.lo = 0; + msr.hi = 0; + msr_write(IA32_THERM_INTERRUPT, msr); + + /* Enable package critical interrupt only */ + msr.lo = 1 << 4; + msr.hi = 0; + msr_write(IA32_PACKAGE_THERM_INTERRUPT, msr); +} + +static void enable_lapic_tpr(void) +{ + msr_t msr; + + msr = msr_read(MSR_PIC_MSG_CONTROL); + msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */ + msr_write(MSR_PIC_MSG_CONTROL, msr); +} + +static void configure_dca_cap(void) +{ + struct cpuid_result cpuid_regs; + msr_t msr; + + /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */ + cpuid_regs = cpuid(1); + if (cpuid_regs.ecx & (1 << 18)) { + msr = msr_read(IA32_PLATFORM_DCA_CAP); + msr.lo |= 1; + msr_write(IA32_PLATFORM_DCA_CAP, msr); + } +} + +static void set_max_ratio(void) +{ + msr_t msr, perf_ctl; + + perf_ctl.hi = 0; + + /* Check for configurable TDP option */ + if (cpu_config_tdp_levels()) { + /* Set to nominal TDP ratio */ + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else { + /* Platform Info bits 15:8 give max ratio */ + msr = msr_read(MSR_PLATFORM_INFO); + perf_ctl.lo = msr.lo & 0xff00; + } + msr_write(IA32_PERF_CTL, perf_ctl); + + debug("model_x06ax: frequency set to %d\n", + ((perf_ctl.lo >> 8) & 0xff) * SANDYBRIDGE_BCLK); +} + +static void set_energy_perf_bias(u8 policy) +{ + msr_t msr; + + /* Energy Policy is bits 3:0 */ + msr = msr_read(IA32_ENERGY_PERFORMANCE_BIAS); + msr.lo &= ~0xf; + msr.lo |= policy & 0xf; + msr_write(IA32_ENERGY_PERFORMANCE_BIAS, msr); + + debug("model_x06ax: energy policy set to %u\n", policy); +} + +static void configure_mca(void) +{ + msr_t msr; + int i; + + msr.lo = 0; + msr.hi = 0; + /* This should only be done on a cold boot */ + for (i = 0; i < 7; i++) + msr_write(IA32_MC0_STATUS + (i * 4), msr); +} + +#if CONFIG_USBDEBUG +static unsigned ehci_debug_addr; +#endif + +/* + * Initialize any extra cores/threads in this package. + */ +static int intel_cores_init(struct x86_cpu_priv *cpu) +{ + struct cpuid_result result; + unsigned threads_per_package, threads_per_core, i; + + /* Logical processors (threads) per core */ + result = cpuid_ext(0xb, 0); + threads_per_core = result.ebx & 0xffff; + + /* Logical processors (threads) per package */ + result = cpuid_ext(0xb, 1); + threads_per_package = result.ebx & 0xffff; + + debug("CPU: %u has %u cores, %u threads per core\n", + cpu->apic_id, threads_per_package / threads_per_core, + threads_per_core); + + for (i = 1; i < threads_per_package; ++i) { + struct x86_cpu_priv *new_cpu; + + new_cpu = calloc(1, sizeof(*new_cpu)); + if (!new_cpu) + return -ENOMEM; + + new_cpu->apic_id = cpu->apic_id + i; + + /* Update APIC ID if no hyperthreading */ + if (threads_per_core == 1) + new_cpu->apic_id <<= 1; + + debug("CPU: %u has core %u\n", cpu->apic_id, new_cpu->apic_id); + +#if CONFIG_SMP && CONFIG_MAX_CPUS > 1 + /* Start the new cpu */ + if (!start_cpu(new_cpu)) { + /* Record the error in cpu? */ + printk(BIOS_ERR, "CPU %u would not start!\n", + new_cpu->apic_id); + new_cpu->start_err = 1; + } +#endif + } + + return 0; +} + +int model_206ax_init(struct x86_cpu_priv *cpu) +{ + int ret; + + /* Clear out pending MCEs */ + configure_mca(); + +#if CONFIG_USBDEBUG + /* Is this caution really needed? */ + if (!ehci_debug_addr) + ehci_debug_addr = get_ehci_debug(); + set_ehci_debug(0); +#endif + + /* Setup MTRRs based on physical address size */ +#if 0 /* TODO: Implement this */ + struct cpuid_result cpuid_regs; + + cpuid_regs = cpuid(0x80000008); + x86_setup_fixed_mtrrs(); + x86_setup_var_mtrrs(cpuid_regs.eax & 0xff, 2); + x86_mtrr_check(); +#endif + +#if CONFIG_USBDEBUG + set_ehci_debug(ehci_debug_addr); +#endif + + /* Enable the local cpu apics */ + enable_lapic_tpr(); + lapic_setup(); + + /* Enable virtualization if enabled in CMOS */ + enable_vmx(); + + /* Configure C States */ + configure_c_states(); + + /* Configure Enhanced SpeedStep and Thermal Sensors */ + configure_misc(); + + /* Thermal throttle activation offset */ + ret = configure_thermal_target(); + if (ret) + return ret; + + /* Enable Direct Cache Access */ + configure_dca_cap(); + + /* Set energy policy */ + set_energy_perf_bias(ENERGY_POLICY_NORMAL); + + /* Set Max Ratio */ + set_max_ratio(); + + /* Enable Turbo */ + turbo_enable(); + + /* Start up extra cores */ + intel_cores_init(cpu); + + return 0; +} diff --git a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h index 6454dd93ff..96d51c2b4d 100644 --- a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h +++ b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h @@ -15,4 +15,7 @@ void bd82x6x_usb_xhci_init(pci_dev_t dev); int bd82x6x_init_pci_devices(void); int bd82x6x_init(void); +struct x86_cpu_priv; +int model_206ax_init(struct x86_cpu_priv *cpu); + #endif diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 6027d593ff..2cbb270089 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -326,6 +326,8 @@ #define MSR_AMD_PERF_STATUS 0xc0010063 #define MSR_AMD_PERF_CTL 0xc0010062 +#define MSR_PMG_CST_CONFIG_CTL 0x000000e2 +#define MSR_PMG_IO_CAPTURE_ADR 0x000000e4 #define MSR_IA32_MPERF 0x000000e7 #define MSR_IA32_APERF 0x000000e8 diff --git a/include/fdtdec.h b/include/fdtdec.h index 0a0afce516..b6e1d40439 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -121,6 +121,7 @@ enum fdt_compat_id { COMPAT_INTEL_MICROCODE, /* Intel microcode update */ COMPAT_MEMORY_SPD, /* Memory SPD information */ COMPAT_INTEL_PANTHERPOINT_AHCI, /* Intel Pantherpoint AHCI */ + COMPAT_INTEL_MODEL_206AX, /* Intel Model 206AX CPU */ COMPAT_COUNT, }; diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 480442f871..723a9579e5 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -76,6 +76,7 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(INTEL_MICROCODE, "intel,microcode"), COMPAT(MEMORY_SPD, "memory-spd"), COMPAT(INTEL_PANTHERPOINT_AHCI, "intel,pantherpoint-ahci"), + COMPAT(INTEL_MODEL_206AX, "intel,model-206ax"), }; const char *fdtdec_get_compatible(enum fdt_compat_id id)