From: Jens Kuske Date: Thu, 10 Dec 2015 10:41:02 +0000 (+0100) Subject: sunxi: Fix H3 DRAM DQ read delay configuration X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bb3654629a6b2ab131de96489f70421f6a848c70;p=u-boot.git sunxi: Fix H3 DRAM DQ read delay configuration The read delays were set incorrectly, leading to reliability issues at higher DRAM clock speeds. This commit adjusts this to match the vendor boot0 behaviour. Signed-off-by: Jens Kuske Tested-by: Siarhei Siamashka Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c index b721d6011a..2020d75fd1 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c @@ -73,10 +73,10 @@ static void mctl_dq_delay(u32 read, u32 write) for (i = 0; i < 4; i++) { val = DATX_IOCR_WRITE_DELAY((write >> (i * 4)) & 0xf) | - DATX_IOCR_READ_DELAY((read >> (i * 4)) & 0xf); + DATX_IOCR_READ_DELAY(((read >> (i * 4)) & 0xf) * 2); for (j = DATX_IOCR_DQ(0); j <= DATX_IOCR_DM; j++) - setbits_le32(&mctl_ctl->datx[i].iocr[j], val); + writel(val, &mctl_ctl->datx[i].iocr[j]); } clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26); @@ -85,8 +85,8 @@ static void mctl_dq_delay(u32 read, u32 write) val = DATX_IOCR_WRITE_DELAY((write >> (16 + i * 4)) & 0xf) | DATX_IOCR_READ_DELAY((read >> (16 + i * 4)) & 0xf); - setbits_le32(&mctl_ctl->datx[i].iocr[DATX_IOCR_DQS], val); - setbits_le32(&mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN], val); + writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQS]); + writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN]); } setbits_le32(&mctl_ctl->pgcr[0], 1 << 26); @@ -436,8 +436,8 @@ unsigned long sunxi_dram_init(void) (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; struct dram_para para = { - .read_delays = 0x00007979, - .write_delays = 0x6aaa0000, + .read_delays = 0x00007979, /* dram_tpr12 */ + .write_delays = 0x6aaa0000, /* dram_tpr11 */ .dual_rank = 0, .bus_width = 32, .row_bits = 15,