From: Tero Kristo Date: Fri, 11 Jun 2021 08:45:27 +0000 (+0300) Subject: arm: dts: k3-j72xx: correct MCU timer1 frequency X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bb318d8dc801586b5e587f7f7d508ad54022fb4b;p=u-boot.git arm: dts: k3-j72xx: correct MCU timer1 frequency MCU timer1 is used as the tick timer for MCU R5 SPL, and the clock-frequency defined in DT appears to be incorrect at the moment. Actual clock source for the timer is MCU_SYSCLK0 / 4 which is 250MHz. Earlier setup of 25MHz went unnoticed, as there was a separate issue with omap-timer, which caused an error to the clock by a factor of 8 with j7 devices. This problem surfaced once the omap-timer was fixed. Signed-off-by: Tero Kristo --- diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi index bd037be350..c3aae65b39 100644 --- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi @@ -33,7 +33,7 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x40400000 0x0 0x80>; ti,timer-alwon; - clock-frequency = <25000000>; + clock-frequency = <250000000>; u-boot,dm-spl; }; diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi index fe095a6153..951331831e 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi @@ -46,7 +46,7 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x40400000 0x0 0x80>; ti,timer-alwon; - clock-frequency = <25000000>; + clock-frequency = <250000000>; u-boot,dm-spl; };