From: Michal Simek Date: Wed, 18 May 2022 10:49:26 +0000 (+0200) Subject: arm64: zynqmp: Add support for kr260 revA/B boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=baba22addd2c08789325f798a22c2b568538cacb;p=u-boot.git arm64: zynqmp: Add support for kr260 revA/B boards Board is using kv260 design for couple of parts defined by spec like i2c eeproms, ina260, uart, etc. Board has 4 gems. One gem connected via PS SGMII(GT), another PS RGMII(MIO) and 2 via EMIO. First two shares the same MIO lines for PHYs. PL based one have separate EMIO lines via PL. Also two USB 3.0 with usb hubs are present. USB phys and USB hubs should have separate reset line. The first usb0 hub also has USB-SD controller (usb2244) connected to port 0. To test compatibility with k26 you can run: fdtoverlay -o /tmp/output.dtb -i arch/arm/dts/zynqmp-sm-k26-revA.dtb \ arch/arm/dts/zynqmp-sck-kr-g-revA.dtbo Also add support for kr260-revB board. Based on FRU it is revision B but schematics can be label as revA03. Changes in revB are: - SFP light - GEM2/3 TX_CLK fixes - PMOD/RPI connector fixes - Replace si5332 with oscilators Signed-off-by: Michal Simek Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/dac2ee1826e73b89c8cc1e430354eb43d291f675.1652870941.git.michal.simek@amd.com --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0a2713c06a..8da631b9e6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -342,6 +342,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-mini-qspi.dtb \ zynqmp-sm-k26-revA.dtb \ zynqmp-smk-k26-revA.dtb \ + zynqmp-sck-kr-g-revA.dtbo \ + zynqmp-sck-kr-g-revB.dtbo \ zynqmp-sck-kv-g-revA.dtbo \ zynqmp-sck-kv-g-revB.dtbo \ zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb \ diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts new file mode 100644 index 0000000000..7be02ab29f --- /dev/null +++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KR260 revA Carrier Card + * + * (C) Copyright 2021, Xilinx, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "xlnx,zynqmp-sk-kr260-revA", + "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp"; + + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + + si5332_0: si5332_0 { /* u17 - GEM0/1 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 - DP */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + si5332_2: si5332_2 { /* u17 - USB */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_3: si5332_3 { /* u17 - SFP+ */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <156250000>; + }; + + si5332_4: si5332_4 { /* u17 - GEM2 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_5: si5332_5 { /* u17 - GEM3 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + + slg7xl45106: gpio@11 { /* u19 - reset logic */ + compatible = "dlg,slg7xl45106"; + reg = <0x11>; + label = "resetchip"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B", + "SD_RESET_B", "USB0_HUB_RESET_B", + "USB1_HUB_RESET_B", "PS_GEM0_RESET_B", + "PS_GEM1_RESET_B", ""; + }; + + i2c-mux@74 { /* u18 */ + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + usbhub_i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + usbhub_i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + /* Bus 2/3 are not connected */ + }; + + /* si5332@6a - u17 - clock-generator */ +}; + +/* GEM SGMII/DP and USB 3.0 */ +&psgtr { + status = "okay"; + /* gem0/1, dp, usb */ + clocks = <&si5332_0>, <&si5332_1>, <&si5332_2>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0"; + phys = <&psgtr 1 PHY_TYPE_DP 0 1>; + assigned-clock-rates = <27000000>, <25000000>, <300000000>; +}; + +&zynqmp_dpdma { + status = "okay"; + assigned-clock-rates = <600000000>; +}; + +&usb0 { /* mio52 - mio63 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; + reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; + assigned-clock-rates = <250000000>, <20000000>; + + usbhub0: usb-hub { /* u43 */ + i2c-bus = <&usbhub_i2c0>; + compatible = "microchip,usb5744"; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; + + usb2244: usb-sd { /* u38 */ + compatible = "microchip,usb2244"; + reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&usb1 { /* mio64 - mio75 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; + reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; + assigned-clock-rates = <250000000>, <20000000>; + + usbhub1: usb-hub { /* u84 */ + i2c-bus = <&usbhub_i2c1>; + compatible = "microchip,usb5744"; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_1 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&gem0 { /* mdio mio50/51 */ + status = "okay"; + phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + is-internal-pcspma; +}; + +&gem1 { /* mdio mio50/51, gem mio38 - mio49 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem1_default>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@4 { /* u81 */ + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <4>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; + }; + phy1: ethernet-phy@8 { /* u36 */ + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <8>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* gem2/gem3 via PL with phys u79@2 and u80@3 */ + +&pinctrl0 { /* required by spec */ + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem1_default: gem1-default { + conf { + groups = "ethernet1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO44", "MIO46", "MIO48"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO45", "MIO47", "MIO49"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO38", "MIO39", "MIO40", + "MIO41", "MIO42", "MIO43"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-mdio { + function = "mdio1"; + groups = "mdio1_0_grp"; + }; + + mux { + function = "ethernet1"; + groups = "ethernet1_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_usb1_default: usb1-default { + conf { + groups = "usb1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + }; + + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts new file mode 100644 index 0000000000..56effb5e21 --- /dev/null +++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KR260 revB Carrier Card (A03 revision) + * + * (C) Copyright 2021 - 2022, Xilinx, Inc. + * + * Michal Simek + */ + +#include +#include +#include +#include + +/dts-v1/; +/plugin/; + +&{/} { + compatible = "xlnx,zynqmp-sk-kr260-revB", + "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp"; + + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + + clk_125: clock0 { /* u87 - GEM0/1 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_27: clock1 { /* u86 - DP */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + clk_26: clock2 { /* u89 - USB */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clk_156: clock3 { /* u90 - SFP+ */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <156250000>; + }; + + clk_25_0: clock4 { /* u92/u91 - GEM2 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clk_25_1: clock5 { /* u92/u91 - GEM3 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + + slg7xl45106: gpio@11 { /* u19 - reset logic */ + compatible = "dlg,slg7xl45106"; + reg = <0x11>; + label = "resetchip"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B", + "SD_RESET_B", "USB0_HUB_RESET_B", + "USB1_HUB_RESET_B", "PS_GEM0_RESET_B", + "PS_GEM1_RESET_B", ""; + }; + + i2c-mux@74 { /* u18 */ + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + usbhub_i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + usbhub_i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + /* Bus 2/3 are not connected */ + }; + + /* si5332@6a - u17 - clock-generator */ +}; + +/* GEM SGMII/DP and USB 3.0 */ +&psgtr { + status = "okay"; + /* gem0/1, dp, usb */ + clocks = <&clk_125>, <&clk_27>, <&clk_26>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0"; + phys = <&psgtr 1 PHY_TYPE_DP 0 1>; + assigned-clock-rates = <27000000>, <25000000>, <300000000>; +}; + +&zynqmp_dpdma { + status = "okay"; + assigned-clock-rates = <600000000>; +}; + +&usb0 { /* mio52 - mio63 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; + reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; + assigned-clock-rates = <250000000>, <20000000>; + + usbhub0: usb-hub { /* u43 */ + i2c-bus = <&usbhub_i2c0>; + compatible = "microchip,usb5744"; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; + + usb2244: usb-sd { /* u38 */ + compatible = "microchip,usb2244"; + reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&usb1 { /* mio64 - mio75 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; + reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; + assigned-clock-rates = <250000000>, <20000000>; + + usbhub1: usb-hub { /* u84 */ + i2c-bus = <&usbhub_i2c1>; + compatible = "microchip,usb5744"; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; +}; + +&dwc3_1 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&gem0 { /* mdio mio50/51 */ + status = "okay"; + phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + is-internal-pcspma; +}; + +&gem1 { /* mdio mio50/51, gem mio38 - mio49 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem1_default>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@4 { /* u81 */ + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <4>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; + }; + phy1: ethernet-phy@8 { /* u36 */ + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <8>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + reset-assert-us = <100>; + reset-deassert-us = <280>; + reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* gem2/gem3 via PL with phys u79@2 and u80@3 */ + +&pinctrl0 { /* required by spec */ + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = ; + power-source = ; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = ; + power-source = ; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem1_default: gem1-default { + conf { + groups = "ethernet1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO44", "MIO46", "MIO48"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO45", "MIO47", "MIO49"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO38", "MIO39", "MIO40", + "MIO41", "MIO42", "MIO43"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio1_0_grp"; + slew-rate = ; + power-source = ; + bias-disable; + }; + + mux-mdio { + function = "mdio1"; + groups = "mdio1_0_grp"; + }; + + mux { + function = "ethernet1"; + groups = "ethernet1_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_usb1_default: usb1-default { + conf { + groups = "usb1_0_grp"; + slew-rate = ; + power-source = ; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + }; + + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +};