From: Tom Rini Date: Fri, 13 May 2022 16:46:23 +0000 (-0400) Subject: Convert CONFIG_SPL_NAND_RAW_ONLY et al to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=bab1b35c617a339da8f859bfea90ec304859b354;p=u-boot.git Convert CONFIG_SPL_NAND_RAW_ONLY et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_RAW_ONLY CONFIG_SPL_NAND_SOFTECC Signed-off-by: Tom Rini --- diff --git a/README b/README index 484a2c500c..0fd92cfaeb 100644 --- a/README +++ b/README @@ -1743,10 +1743,6 @@ The following options need to be configured: Support for a lightweight UBI (fastmap) scanner and loader - CONFIG_SPL_NAND_RAW_ONLY - Support to boot only raw u-boot.bin images. Use this only - if you need to save space. - CONFIG_SPL_COMMON_INIT_DDR Set for common ddr init with serial presence detect in SPL binary. diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 42681211d0..b45607b3f7 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -763,13 +763,23 @@ config SPL_NAND_SUPPORT This enables the drivers in drivers/mtd/nand/raw as part of an SPL build. +config SPL_NAND_RAW_ONLY + bool "Support to boot only raw u-boot.bin images" + depends on SPL_NAND_SUPPORT + help + Use this only if you need to save space. + config SPL_NAND_DRIVERS bool "Use standard NAND driver" help SPL uses normal NAND drivers, not minimal drivers. config SPL_NAND_ECC - bool "Include standard software ECC in the SPL" + bool "Include standard ECC in SPL" + +config SPL_NAND_SOFTECC + bool "Use software ECC in SPL" + depends on SPL_NAND_ECC config SPL_NAND_SIMPLE bool "Support simple NAND drivers in SPL" diff --git a/configs/axm_defconfig b/configs/axm_defconfig index d17cdd29c5..ebda5a49fe 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -39,8 +39,10 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_CRC32=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_HUSH_PARSER=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index 443f15e71d..9b55d9e87d 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -32,8 +32,10 @@ CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 71e80e8048..5b25463df9 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -26,8 +26,10 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_CMD_IMLS=y CONFIG_CMD_GPIO=y diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig index 0dbd084958..2ee7163653 100644 --- a/configs/gardena-smart-gateway-at91sam_defconfig +++ b/configs/gardena-smart-gateway-at91sam_defconfig @@ -35,6 +35,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index a9f90e9075..b3c6d23e71 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -33,8 +33,10 @@ CONFIG_BOOTCOMMAND="run flashboot" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index 90f9133cb6..8bc5afdc2e 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -43,8 +43,10 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_CRC32=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_HUSH_PARSER=y diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 38b9061080..2930d7a149 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -56,7 +56,6 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #elif CONFIG_NAND_BOOT -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_ECCSIZE 256 diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 4809b59ecc..b4fef73121 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -63,8 +63,6 @@ #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 93a704cc31..d2a760e9b1 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -97,11 +97,6 @@ /* SPL will use serial */ -/* SPL loads an image from NAND */ -#define CONFIG_SPL_NAND_RAW_ONLY - -#define CONFIG_SPL_NAND_SOFTECC - #define CONFIG_SPL_MAX_SIZE 0x20000 #define CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h index 5e6a8ee770..3e99d2cfb0 100644 --- a/include/configs/gardena-smart-gateway-at91sam.h +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -51,7 +51,6 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index b858aaa1cc..658b8a7f15 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -61,7 +61,6 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #elif CONFIG_NAND_BOOT -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_ECCSIZE 256 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index b51a520354..d58d76d109 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -126,8 +126,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 77d80bfc98..768bfc6cc6 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -152,8 +152,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE