From: Hiago De Franco Date: Fri, 15 Mar 2024 21:56:57 +0000 (-0300) Subject: doc: board: apalis-imx8: Update and improve documentation X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b9d4db4e0f76f759b6a60035cbc191a8f3ed227b;p=u-boot.git doc: board: apalis-imx8: Update and improve documentation Update and improve the building documentation of Apalis iMX8. The following changes were made: - imx-atf repository changed to nxp-imx GitHub. - imx-atf branch updated to 'lf_v2.6'. - imx-seco updated to version 5.8.7. - nxp-imx mfgtools link updated to GitHub releases. - General writing improvements. Signed-off-by: Hiago De Franco --- diff --git a/doc/board/toradex/apalis-imx8.rst b/doc/board/toradex/apalis-imx8.rst index ffc4c7d222..069d86ccd8 100644 --- a/doc/board/toradex/apalis-imx8.rst +++ b/doc/board/toradex/apalis-imx8.rst @@ -20,36 +20,36 @@ Quick Start Get and Build the ARM Trusted Firmware -------------------------------------- +Download the imx-atf repository: + +.. code-block:: bash + + $ git clone -b lf_v2.6 https://github.com/nxp-imx/imx-atf.git + +Compile it with an aarch64 toolchain: + .. code-block:: bash - $ git clone -b imx_4.14.78_1.0.0_ga https://github.com/nxp-imx/imx-atf $ cd imx-atf/ $ make PLAT=imx8qm bl31 Get scfw_tcm.bin and ahab-container.img --------------------------------------- -.. code-block:: bash - - $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes- - bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true - $ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin - $ chmod +x firmware-imx-8.0.bin - $ ./firmware-imx-8.0.bin - -Copy the following binaries to the U-Boot folder: +Download imx-seco firmware and extract it: .. code-block:: bash - $ cp imx-atf/build/imx8qm/release/bl31.bin . - $ cp u-boot/u-boot.bin . + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-5.8.7.bin + $ sh imx-seco-5.8.7.bin --auto-accept -Copy the following firmware to the U-Boot folder: +Copy the following binaries to the U-Boot folder: .. code-block:: bash - $ cp firmware-imx-8.0/firmware/seco/ahab-container.img . + $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qm_b0/build_mx8qm_b0/mx8qm-apalis-scfw-tcm.bin + $ cp ../imx-atf/build/imx8qm/release/bl31.bin . + $ cp ../imx-seco-5.8.7/firmware/seco/mx8qmb0-ahab-container.img mx8qm-ahab-container.img Build U-Boot ------------ @@ -64,7 +64,7 @@ Load the U-Boot Binary Using UUU Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``: -https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases +https://github.com/nxp-imx/mfgtools/releases Put the module into USB recovery aka serial downloader mode, connect the USB device to your host and execute ``uuu``: