From: Wu, Josh Date: Sun, 9 Sep 2012 23:45:49 +0000 (+0000) Subject: atmel_nand: fix the U-Boot output information about nand flash with PMECC enable. X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b9c83c68151636656c15d069397a716932872bd7;p=u-boot.git atmel_nand: fix the U-Boot output information about nand flash with PMECC enable. Before the patch, it looks like: |U-Boot 2012.07-00441-gd578d6f-dirty (Sep 10 2012 - 16:11:06) | |CPU: AT91SAM9G35 |Crystal frequency: 12 MHz |CPU clock : 400 MHz |Master clock : 133.333 MHz |DRAM: 128 MiB |WARNING: Caches not enabled > |NAND: Initialize PMECC params, cap: 2, sector: 512 > |256 MiB |MMC: mci: 0 |In: serial |Out: serial |Err: serial |Net: macb0 |Hit any key to stop autoboot: 0 After the patch: |U-Boot 2012.07-00441-gd578d6f-dirty (Sep 10 2012 - 16:18:11) | |CPU: AT91SAM9G35 |Crystal frequency: 12 MHz |CPU clock : 400 MHz |Master clock : 133.333 MHz |DRAM: 128 MiB |WARNING: Caches not enabled > |NAND: 256 MiB | ... ... |Hit any key to stop autoboot: 0 Signed-off-by: Josh Wu Signed-off-by: Andreas Bießmann --- diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index c6aa5db33c..994dd9f095 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -652,8 +652,9 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET; - printk(KERN_INFO "Initialize PMECC params, cap: %d, sector: %d\n", - cap, sector_size); + MTDDEBUG(MTD_DEBUG_LEVEL1, + "Initialize PMECC params, cap: %d, sector: %d\n", + cap, sector_size); host->pmecc = (struct pmecc_regs __iomem *) ATMEL_BASE_PMECC; host->pmerrloc = (struct pmecc_errloc_regs __iomem *)