From: Andrew Davis Date: Fri, 7 Oct 2022 17:11:13 +0000 (-0500) Subject: dma: Transfer dma_ops should use DMA address types X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b9add6413d2bcbec281d1a1edeec5c729a576a1b;p=u-boot.git dma: Transfer dma_ops should use DMA address types DMA operations should function on DMA addresses, not virtual addresses. Although these are usually the same in U-Boot, it is more correct to be explicit with our types here. Signed-off-by: Andrew Davis --- diff --git a/drivers/dma/dma-uclass.c b/drivers/dma/dma-uclass.c index 70f06f1f09..81dbb4da10 100644 --- a/drivers/dma/dma-uclass.c +++ b/drivers/dma/dma-uclass.c @@ -252,7 +252,7 @@ int dma_memcpy(void *dst, void *src, size_t len) destination = dma_map_single(dst, len, DMA_FROM_DEVICE); source = dma_map_single(src, len, DMA_TO_DEVICE); - ret = ops->transfer(dev, DMA_MEM_TO_MEM, dst, src, len); + ret = ops->transfer(dev, DMA_MEM_TO_MEM, destination, source, len); /* Clean+Invalidate the areas after, so we can see DMA'd data */ dma_unmap_single(destination, len, DMA_FROM_DEVICE); diff --git a/drivers/dma/sandbox-dma-test.c b/drivers/dma/sandbox-dma-test.c index aebf3eef96..2b8259a35b 100644 --- a/drivers/dma/sandbox-dma-test.c +++ b/drivers/dma/sandbox-dma-test.c @@ -39,9 +39,9 @@ struct sandbox_dma_dev { }; static int sandbox_dma_transfer(struct udevice *dev, int direction, - void *dst, void *src, size_t len) + dma_addr_t dst, dma_addr_t src, size_t len) { - memcpy(dst, src, len); + memcpy((void *)dst, (void *)src, len); return 0; } diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c index 53dc4e8ce5..1ad3b92dbf 100644 --- a/drivers/dma/ti-edma3.c +++ b/drivers/dma/ti-edma3.c @@ -396,7 +396,7 @@ void qedma3_stop(u32 base, struct edma3_channel_config *cfg) } void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num, - void *dst, void *src, size_t len, size_t s_len) + dma_addr_t dst, dma_addr_t src, size_t len, size_t s_len) { struct edma3_slot_config slot; struct edma3_channel_config edma_channel; @@ -484,7 +484,7 @@ void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num, } void __edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num, - void *dst, u8 val, size_t len) + dma_addr_t dst, u8 val, size_t len) { int xfer_len; int max_xfer = EDMA_FILL_BUFFER_SIZE * 65535; @@ -499,7 +499,7 @@ void __edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num, xfer_len = max_xfer; __edma3_transfer(edma3_base_addr, edma_slot_num, dst, - edma_fill_buffer, xfer_len, + source, xfer_len, EDMA_FILL_BUFFER_SIZE); len -= xfer_len; dst += xfer_len; @@ -517,7 +517,7 @@ void edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num, dma_addr_t destination = dma_map_single(dst, len, DMA_FROM_DEVICE); dma_addr_t source = dma_map_single(src, len, DMA_TO_DEVICE); - __edma3_transfer(edma3_base_addr, edma_slot_num, dst, src, len, len); + __edma3_transfer(edma3_base_addr, edma_slot_num, destination, source, len, len); /* Clean+Invalidate the areas after, so we can see DMA'd data */ dma_unmap_single(destination, len, DMA_FROM_DEVICE); @@ -530,7 +530,7 @@ void edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num, /* Clean the area, so no writeback into the RAM races with DMA */ dma_addr_t destination = dma_map_single(dst, len, DMA_FROM_DEVICE); - __edma3_fill(edma3_base_addr, edma_slot_num, dst, val, len); + __edma3_fill(edma3_base_addr, edma_slot_num, destination, val, len); /* Clean+Invalidate the area after, so we can see DMA'd data */ dma_unmap_single(destination, len, DMA_FROM_DEVICE); @@ -538,8 +538,8 @@ void edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num, #else -static int ti_edma3_transfer(struct udevice *dev, int direction, void *dst, - void *src, size_t len) +static int ti_edma3_transfer(struct udevice *dev, int direction, + dma_addr_t dst, dma_addr_t src, size_t len) { struct ti_edma3_priv *priv = dev_get_priv(dev); diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 1a9197bfc8..d92b964436 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -2305,7 +2305,7 @@ err_res_free: } static int udma_transfer(struct udevice *dev, int direction, - void *dst, void *src, size_t len) + dma_addr_t dst, dma_addr_t src, size_t len) { struct udma_dev *ud = dev_get_priv(dev); /* Channel0 is reserved for memcpy */ @@ -2326,7 +2326,7 @@ static int udma_transfer(struct udevice *dev, int direction, if (ret) return ret; - udma_prep_dma_memcpy(uc, (dma_addr_t)dst, (dma_addr_t)src, len); + udma_prep_dma_memcpy(uc, dst, src, len); udma_start(uc); udma_poll_completion(uc, &paddr); udma_stop(uc); diff --git a/include/dma-uclass.h b/include/dma-uclass.h index 340437acc1..ea721baae6 100644 --- a/include/dma-uclass.h +++ b/include/dma-uclass.h @@ -132,8 +132,8 @@ struct dma_ops { * @len: Length of the data to be copied (number of bytes). * @return zero on success, or -ve error code. */ - int (*transfer)(struct udevice *dev, int direction, void *dst, - void *src, size_t len); + int (*transfer)(struct udevice *dev, int direction, dma_addr_t dst, + dma_addr_t src, size_t len); }; #endif /* _DMA_UCLASS_H */