From: Wolfgang Grandegger Date: Thu, 5 Jun 2008 11:12:00 +0000 (+0200) Subject: TQM85xx: Various coding style fixes X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b99ba1679e8cd51b023e67098c89e606e47137d2;p=u-boot.git TQM85xx: Various coding style fixes Signed-off-by: Wolfgang Grandegger --- diff --git a/board/tqc/tqm85xx/law.c b/board/tqc/tqm85xx/law.c index 224af6ca77..d9377005e2 100644 --- a/board/tqc/tqm85xx/law.c +++ b/board/tqc/tqm85xx/law.c @@ -44,11 +44,11 @@ */ struct law_entry law_table[] = { - SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR), - SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW_ENTRY(3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC), - SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), - SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW_ENTRY (1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR), + SET_LAW_ENTRY (2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY (3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC), + SET_LAW_ENTRY (4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), + SET_LAW_ENTRY (5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), }; -int num_law_entries = ARRAY_SIZE(law_table); +int num_law_entries = ARRAY_SIZE (law_table); diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c index 788a48cd13..413567ecb0 100644 --- a/board/tqc/tqm85xx/sdram.c +++ b/board/tqc/tqm85xx/sdram.c @@ -21,7 +21,6 @@ * MA 02111-1307 USA */ - #include #include #include @@ -39,12 +38,12 @@ sdram_conf_t ddr_cs_conf[] = { {(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */ {(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */ {(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */ - {(64 << 20), 0x80000001}, /* 64MB, 12x9(4) */ + {( 64 << 20), 0x80000001}, /* 64MB, 12x9(4) */ }; #define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0])) -int cas_latency(void); +int cas_latency (void); /* * Autodetect onboard DDR SDRAM on 85xx platforms @@ -53,7 +52,7 @@ int cas_latency(void); * so this should be extended for other future boards * using this routine! */ -long int sdram_setup(int casl) +long int sdram_setup (int casl) { int i; volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR); @@ -92,17 +91,18 @@ long int sdram_setup(int casl) ddr->sdram_interval = 0x05160100; /* autocharge,no open page */ ddr->err_disable = 0x0000000D; - asm ("sync;isync;msync"); - udelay(1000); + asm ("sync; isync; msync"); + udelay (1000); ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */ asm ("sync; isync; msync"); - udelay(1000); + udelay (1000); - for (i=0; ics0_config = ddr_cs_conf[i].reg; - if (get_ram_size(0, ddr_cs_conf[i].size) == ddr_cs_conf[i].size) { + if (get_ram_size (0, ddr_cs_conf[i].size) == + ddr_cs_conf[i].size) { /* * OK, size detected -> all done */ @@ -110,30 +110,30 @@ long int sdram_setup(int casl) } } - return 0; /* nothing found ! */ + return 0; /* nothing found ! */ } -void board_add_ram_info(int use_default) +void board_add_ram_info (int use_default) { int casl; if (use_default) casl = CONFIG_DDR_DEFAULT_CL; else - casl = cas_latency(); + casl = cas_latency (); - puts(" (CL="); + puts (" (CL="); switch (casl) { case 20: - puts("2)"); + puts ("2)"); break; case 25: - puts("2.5)"); + puts ("2.5)"); break; case 30: - puts("3)"); + puts ("3)"); break; } } @@ -149,7 +149,7 @@ long int initdram (int board_type) */ { volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - int i,x; + int i, x; x = 10; @@ -157,32 +157,32 @@ long int initdram (int board_type) * Work around to stabilize DDR DLL */ gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); + asm ("sync; isync; msync"); udelay (200); while (gur->ddrdllcr != 0x81000100) { gur->devdisr = gur->devdisr | 0x00010000; - asm("sync;isync;msync"); - for (i=0; idevdisr = gur->devdisr & 0xfff7ffff; - asm("sync;isync;msync"); + asm ("sync; isync; msync"); x++; } } #endif - casl = cas_latency(); - dram_size = sdram_setup(casl); + casl = cas_latency (); + dram_size = sdram_setup (casl); if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) { /* * Try again with default CAS latency */ - puts("Problem with CAS lantency"); - board_add_ram_info(1); - puts(", using default CL!\n"); + puts ("Problem with CAS lantency"); + board_add_ram_info (1); + puts (", using default CL!\n"); casl = CONFIG_DDR_DEFAULT_CL; - dram_size = sdram_setup(casl); - puts(" "); + dram_size = sdram_setup (casl); + puts (" "); } return dram_size; diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c index ad26caeea2..3e29062362 100644 --- a/board/tqc/tqm85xx/tlb.c +++ b/board/tqc/tqm85xx/tlb.c @@ -28,87 +28,93 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - + SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 4 * 1024, + CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 8 * 1024, + CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 12 * 1024, + CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), /* * TLB 0, 1: 128M Non-cacheable, guarded * 0xf8000000 128M FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_64M, 1), - SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_64M, 1), + SET_TLB_ENTRY (1, CFG_FLASH_BASE, CFG_FLASH_BASE, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 1, BOOKE_PAGESZ_64M, 1), + SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x4000000, + CFG_FLASH_BASE + 0x4000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 0, BOOKE_PAGESZ_64M, 1), /* * TLB 2: 256M Non-cacheable, guarded * 0x80000000 256M PCI1 MEM First half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), /* * TLB 3: 256M Non-cacheable, guarded * 0x90000000 256M PCI1 MEM Second half */ - SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS + 0x10000000, + CFG_PCI1_MEM_PHYS + 0x10000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), /* * TLB 4: 256M Non-cacheable, guarded * 0xc0000000 256M Rapid IO MEM First half */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), /* * TLB 5: 256M Non-cacheable, guarded * 0xd0000000 256M Rapid IO MEM Second half */ - SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE + 0x10000000, + CFG_RIO_MEM_BASE + 0x10000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), /* - * TLB 6: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO + * TLB 6: 64M Non-cacheable, guarded + * 0xe0000000 1M CCSRBAR + * 0xe2000000 16M PCI1 IO */ - SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_64M, 1), + SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 6, BOOKE_PAGESZ_64M, 1), /* - * TLB 7+8: 512M DDR, cache disabled (needed for memory test) - * 0x00000000 512M DDR System memory + * TLB 7+8: 512M DDR, cache disabled (needed for memory test) + * 0x00000000 512M DDR System memory * Without SPD EEPROM configured DDR, this must be setup manually. * Make sure the TLB count at the top of this table is correct. * Likely it needs to be increased by two for these entries. */ - SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 7, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE + 0x10000000, + CFG_DDR_SDRAM_BASE + 0x10000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 8, BOOKE_PAGESZ_256M, 1), }; -int num_tlb_entries = ARRAY_SIZE(tlb_table); +int num_tlb_entries = ARRAY_SIZE (tlb_table); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 8fa0162d83..31364d3fcf 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -42,7 +42,7 @@ void local_bus_init (void); ulong flash_get_size (ulong base, int banknum); #ifdef CONFIG_PS2MULT -void ps2mult_early_init(void); +void ps2mult_early_init (void); #endif #ifdef CONFIG_CPM2 @@ -55,149 +55,149 @@ void ps2mult_early_init(void); const iop_conf_t iop_conf_tab[4][32] = { - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ - /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ - /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ - /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ - /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ - /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ - /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ - /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ - /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ - /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ - /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ - /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ - /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* FREERUN */ - /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ - /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ - /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ - /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ - /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:COL */ - /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ - /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ - /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ - /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ - /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ - /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ - /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ - /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ - /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ - /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ - /* PC13 */ { 0, 1, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ - /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */ - /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ - /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ - /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ - /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ - /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* PD28 */ - /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* PD27 */ - /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ - /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ - /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } + /* Port A: conf, ppar, psor, pdir, podr, pdat */ + { + {1, 1, 1, 0, 0, 0}, /* PA31: FCC1 MII COL */ + {1, 1, 1, 0, 0, 0}, /* PA30: FCC1 MII CRS */ + {1, 1, 1, 1, 0, 0}, /* PA29: FCC1 MII TX_ER */ + {1, 1, 1, 1, 0, 0}, /* PA28: FCC1 MII TX_EN */ + {1, 1, 1, 0, 0, 0}, /* PA27: FCC1 MII RX_DV */ + {1, 1, 1, 0, 0, 0}, /* PA26: FCC1 MII RX_ER */ + {0, 1, 0, 1, 0, 0}, /* PA25: FCC1 ATMTXD[0] */ + {0, 1, 0, 1, 0, 0}, /* PA24: FCC1 ATMTXD[1] */ + {0, 1, 0, 1, 0, 0}, /* PA23: FCC1 ATMTXD[2] */ + {0, 1, 0, 1, 0, 0}, /* PA22: FCC1 ATMTXD[3] */ + {1, 1, 0, 1, 0, 0}, /* PA21: FCC1 MII TxD[3] */ + {1, 1, 0, 1, 0, 0}, /* PA20: FCC1 MII TxD[2] */ + {1, 1, 0, 1, 0, 0}, /* PA19: FCC1 MII TxD[1] */ + {1, 1, 0, 1, 0, 0}, /* PA18: FCC1 MII TxD[0] */ + {1, 1, 0, 0, 0, 0}, /* PA17: FCC1 MII RxD[0] */ + {1, 1, 0, 0, 0, 0}, /* PA16: FCC1 MII RxD[1] */ + {1, 1, 0, 0, 0, 0}, /* PA15: FCC1 MII RxD[2] */ + {1, 1, 0, 0, 0, 0}, /* PA14: FCC1 MII RxD[3] */ + {0, 1, 0, 0, 0, 0}, /* PA13: FCC1 ATMRXD[3] */ + {0, 1, 0, 0, 0, 0}, /* PA12: FCC1 ATMRXD[2] */ + {0, 1, 0, 0, 0, 0}, /* PA11: FCC1 ATMRXD[1] */ + {0, 1, 0, 0, 0, 0}, /* PA10: FCC1 ATMRXD[0] */ + {0, 1, 1, 1, 0, 0}, /* PA9 : FCC1 L1TXD */ + {0, 1, 1, 0, 0, 0}, /* PA8 : FCC1 L1RXD */ + {0, 0, 0, 1, 0, 0}, /* PA7 : PA7 */ + {0, 1, 1, 1, 0, 0}, /* PA6 : TDM A1 L1RSYNC */ + {0, 0, 0, 1, 0, 0}, /* PA5 : PA5 */ + {0, 0, 0, 1, 0, 0}, /* PA4 : PA4 */ + {0, 0, 0, 1, 0, 0}, /* PA3 : PA3 */ + {0, 0, 0, 1, 0, 0}, /* PA2 : PA2 */ + {0, 0, 0, 0, 0, 0}, /* PA1 : FREERUN */ + {0, 0, 0, 1, 0, 0} /* PA0 : PA0 */ + }, + + /* Port B: conf, ppar, psor, pdir, podr, pdat */ + { + {1, 1, 0, 1, 0, 0}, /* PB31: FCC2 MII TX_ER */ + {1, 1, 0, 0, 0, 0}, /* PB30: FCC2 MII RX_DV */ + {1, 1, 1, 1, 0, 0}, /* PB29: FCC2 MII TX_EN */ + {1, 1, 0, 0, 0, 0}, /* PB28: FCC2 MII RX_ER */ + {1, 1, 0, 0, 0, 0}, /* PB27: FCC2 MII COL */ + {1, 1, 0, 0, 0, 0}, /* PB26: FCC2 MII CRS */ + {1, 1, 0, 1, 0, 0}, /* PB25: FCC2 MII TxD[3] */ + {1, 1, 0, 1, 0, 0}, /* PB24: FCC2 MII TxD[2] */ + {1, 1, 0, 1, 0, 0}, /* PB23: FCC2 MII TxD[1] */ + {1, 1, 0, 1, 0, 0}, /* PB22: FCC2 MII TxD[0] */ + {1, 1, 0, 0, 0, 0}, /* PB21: FCC2 MII RxD[0] */ + {1, 1, 0, 0, 0, 0}, /* PB20: FCC2 MII RxD[1] */ + {1, 1, 0, 0, 0, 0}, /* PB19: FCC2 MII RxD[2] */ + {1, 1, 0, 0, 0, 0}, /* PB18: FCC2 MII RxD[3] */ + {1, 1, 0, 0, 0, 0}, /* PB17: FCC3:RX_DIV */ + {1, 1, 0, 0, 0, 0}, /* PB16: FCC3:RX_ERR */ + {1, 1, 0, 1, 0, 0}, /* PB15: FCC3:TX_ERR */ + {1, 1, 0, 1, 0, 0}, /* PB14: FCC3:TX_EN */ + {1, 1, 0, 0, 0, 0}, /* PB13: FCC3:COL */ + {1, 1, 0, 0, 0, 0}, /* PB12: FCC3:CRS */ + {1, 1, 0, 0, 0, 0}, /* PB11: FCC3:RXD */ + {1, 1, 0, 0, 0, 0}, /* PB10: FCC3:RXD */ + {1, 1, 0, 0, 0, 0}, /* PB9 : FCC3:RXD */ + {1, 1, 0, 0, 0, 0}, /* PB8 : FCC3:RXD */ + {1, 1, 0, 1, 0, 0}, /* PB7 : FCC3:TXD */ + {1, 1, 0, 1, 0, 0}, /* PB6 : FCC3:TXD */ + {1, 1, 0, 1, 0, 0}, /* PB5 : FCC3:TXD */ + {1, 1, 0, 1, 0, 0}, /* PB4 : FCC3:TXD */ + {0, 0, 0, 0, 0, 0}, /* PB3 : pin doesn't exist */ + {0, 0, 0, 0, 0, 0}, /* PB2 : pin doesn't exist */ + {0, 0, 0, 0, 0, 0}, /* PB1 : pin doesn't exist */ + {0, 0, 0, 0, 0, 0} /* PB0 : pin doesn't exist */ + }, + + /* Port C: conf, ppar, psor, pdir, podr, pdat */ + { + {0, 0, 0, 1, 0, 0}, /* PC31: PC31 */ + {0, 0, 0, 1, 0, 0}, /* PC30: PC30 */ + {0, 1, 1, 0, 0, 0}, /* PC29: SCC1 EN *CLSN */ + {0, 0, 0, 1, 0, 0}, /* PC28: PC28 */ + {0, 0, 0, 1, 0, 0}, /* PC27: UART Clock in */ + {0, 0, 0, 1, 0, 0}, /* PC26: PC26 */ + {0, 0, 0, 1, 0, 0}, /* PC25: PC25 */ + {0, 0, 0, 1, 0, 0}, /* PC24: PC24 */ + {0, 1, 0, 1, 0, 0}, /* PC23: ATMTFCLK */ + {0, 1, 0, 0, 0, 0}, /* PC22: ATMRFCLK */ + {1, 1, 0, 0, 0, 0}, /* PC21: SCC1 EN RXCLK */ + {1, 1, 0, 0, 0, 0}, /* PC20: SCC1 EN TXCLK */ + {1, 1, 0, 0, 0, 0}, /* PC19: FCC2 MII RX_CLK CLK13 */ + {1, 1, 0, 0, 0, 0}, /* PC18: FCC Tx Clock (CLK14) */ + {1, 1, 0, 0, 0, 0}, /* PC17: PC17 */ + {1, 1, 0, 0, 0, 0}, /* PC16: FCC Tx Clock (CLK16) */ + {0, 1, 0, 0, 0, 0}, /* PC15: PC15 */ + {0, 1, 0, 0, 0, 0}, /* PC14: SCC1 EN *CD */ + {0, 1, 0, 0, 0, 0}, /* PC13: PC13 */ + {0, 1, 0, 1, 0, 0}, /* PC12: PC12 */ + {0, 0, 0, 1, 0, 0}, /* PC11: LXT971 transmit control */ + {0, 0, 0, 1, 0, 0}, /* PC10: FETHMDC */ + {0, 0, 0, 0, 0, 0}, /* PC9 : FETHMDIO */ + {0, 0, 0, 1, 0, 0}, /* PC8 : PC8 */ + {0, 0, 0, 1, 0, 0}, /* PC7 : PC7 */ + {0, 0, 0, 1, 0, 0}, /* PC6 : PC6 */ + {0, 0, 0, 1, 0, 0}, /* PC5 : PC5 */ + {0, 0, 0, 1, 0, 0}, /* PC4 : PC4 */ + {0, 0, 0, 1, 0, 0}, /* PC3 : PC3 */ + {0, 0, 0, 1, 0, 1}, /* PC2 : ENET FDE */ + {0, 0, 0, 1, 0, 0}, /* PC1 : ENET DSQE */ + {0, 0, 0, 1, 0, 0}, /* PC0 : ENET LBK */ + }, + + /* Port D: conf, ppar, psor, pdir, podr, pdat */ + { + {1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */ + {1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */ + {1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */ + {1, 1, 0, 0, 0, 0}, /* PD28: PD28 */ + {1, 1, 0, 1, 0, 0}, /* PD27: PD27 */ + {1, 1, 0, 1, 0, 0}, /* PD26: PD26 */ + {0, 0, 0, 1, 0, 0}, /* PD25: PD25 */ + {0, 0, 0, 1, 0, 0}, /* PD24: PD24 */ + {0, 0, 0, 1, 0, 0}, /* PD23: PD23 */ + {0, 0, 0, 1, 0, 0}, /* PD22: PD22 */ + {0, 0, 0, 1, 0, 0}, /* PD21: PD21 */ + {0, 0, 0, 1, 0, 0}, /* PD20: PD20 */ + {0, 0, 0, 1, 0, 0}, /* PD19: PD19 */ + {0, 0, 0, 1, 0, 0}, /* PD18: PD18 */ + {0, 1, 0, 0, 0, 0}, /* PD17: FCC1 ATMRXPRTY */ + {0, 1, 0, 1, 0, 0}, /* PD16: FCC1 ATMTXPRTY */ + {0, 1, 1, 0, 1, 0}, /* PD15: I2C SDA */ + {0, 0, 0, 1, 0, 0}, /* PD14: LED */ + {0, 0, 0, 0, 0, 0}, /* PD13: PD13 */ + {0, 0, 0, 0, 0, 0}, /* PD12: PD12 */ + {0, 0, 0, 0, 0, 0}, /* PD11: PD11 */ + {0, 0, 0, 0, 0, 0}, /* PD10: PD10 */ + {0, 1, 0, 1, 0, 0}, /* PD9 : SMC1 TXD */ + {0, 1, 0, 0, 0, 0}, /* PD8 : SMC1 RXD */ + {0, 0, 0, 1, 0, 1}, /* PD7 : PD7 */ + {0, 0, 0, 1, 0, 1}, /* PD6 : PD6 */ + {0, 0, 0, 1, 0, 1}, /* PD5 : PD5 */ + {0, 0, 0, 1, 0, 1}, /* PD4 : PD4 */ + {0, 0, 0, 0, 0, 0}, /* PD3 : pin doesn't exist */ + {0, 0, 0, 0, 0, 0}, /* PD2 : pin doesn't exist */ + {0, 0, 0, 0, 0, 0}, /* PD1 : pin doesn't exist */ + {0, 0, 0, 0, 0, 0} /* PD0 : pin doesn't exist */ + } }; #endif /* CONFIG_CPM2 */ @@ -207,9 +207,9 @@ const iop_conf_t iop_conf_tab[4][32] = { static const int casl_table[] = { 20, 25, 30 }; #define N_CASL (sizeof(casl_table) / sizeof(casl_table[0])) -int cas_latency(void) +int cas_latency (void) { - char *s = getenv("serial#"); + char *s = getenv ("serial#"); int casl; int val; int i; @@ -217,11 +217,11 @@ int cas_latency(void) casl = CONFIG_DDR_DEFAULT_CL; if (s != NULL) { - if (strncmp(s + strlen(s) - strlen(CASL_STRING1), CASL_STRING2, - strlen(CASL_STRING2)) == 0) { - val = simple_strtoul(s + strlen(s) - 2, NULL, 10); + if (strncmp(s + strlen (s) - strlen (CASL_STRING1), + CASL_STRING2, strlen (CASL_STRING2)) == 0) { + val = simple_strtoul (s + strlen (s) - 2, NULL, 10); - for (i=0; ibd->bi_flashsize < (0 - CFG_FLASH0)) { - memctl->or0 = gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff); - memctl->br0 = gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff); + memctl->or0 = + gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff); + memctl->br0 = + gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff); /* * Re-check to get correct base address */ - flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1); + flash_get_size (gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1); } /* @@ -297,7 +299,8 @@ int misc_init_r (void) /* Monitor protection ON by default */ flash_protect (FLAG_PROTECT_SET, - CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[CFG_MAX_FLASH_BANKS - 1]); /* Environment protection ON by default */ @@ -385,22 +388,19 @@ static struct pci_config_table pci_mpc85xxads_config_table[] = { PCI_IDSEL_NUMBER, PCI_ANY_ID, pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER}}, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, {} }; #endif - static struct pci_controller hose = { #ifndef CONFIG_PCI_PNP - config_table:pci_mpc85xxads_config_table, + config_table:pci_mpc85xxads_config_table, #endif }; #endif /* CONFIG_PCI */ - void pci_init_board (void) { #ifdef CONFIG_PCI @@ -412,7 +412,7 @@ void pci_init_board (void) int board_early_init_r (void) { #ifdef CONFIG_PS2MULT - ps2mult_early_init(); + ps2mult_early_init (); #endif /* CONFIG_PS2MULT */ return (0); } diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index fca5f74df7..f0e73184f4 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -50,7 +50,7 @@ #define CONFIG_CPM2 1 /* has CPM2 */ #endif -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ /* * sysclk for MPC85xx @@ -102,11 +102,11 @@ /* TQM8540 & 8560 need DLL-override */ #define CONFIG_DDR_DLL /* DLL fix needed */ #define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */ -#endif /* defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) */ +#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */ #if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) #define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */ -#endif /* defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) */ +#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 */ /* * Flash on the Local Bus @@ -116,51 +116,51 @@ #define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 } #define CFG_LBC_FLASH_BASE CFG_FLASH1 /* Localbus flash start */ -#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */ +#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */ #define CFG_BR0_PRELIM 0xfc001801 /* port size 32bit */ #define CFG_OR0_PRELIM 0xfc000040 /* 64MB Flash */ #define CFG_BR1_PRELIM 0xf8001801 /* port size 32bit */ #define CFG_OR1_PRELIM 0xfc000040 /* 64MB Flash */ -#define CFG_FLASH_CFI /* flash is CFI compat. */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver*/ +#define CFG_FLASH_CFI /* flash is CFI compat. */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/ -#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ -#define CFG_MAX_FLASH_SECT 512 /* sectors per device */ +#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_SECT 512 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ -#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */ -#define CFG_LBC_LBCR 0x00000000 /* LB config reg */ -#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ +#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */ +#define CFG_LBC_LBCR 0x00000000 /* LB config reg */ +#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ #define CONFIG_L1_INIT_RAM #define CFG_INIT_RAM_LOCK 1 #define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CFG_INIT_RAM_END 0x4000 /* End used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data*/ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* Serial Port */ #if defined(CONFIG_TQM8560) -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ +#define CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else */ +#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ -#else /* ! TQM8560 */ +#else /* !CONFIG_TQM8560 */ #define CONFIG_CONS_INDEX 1 #undef CONFIG_SERIAL_SOFTWARE_FIFO @@ -173,20 +173,18 @@ #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) /* PS/2 Keyboard */ -#if !defined(CONFIG_TQM8560) #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ #define CONFIG_PS2SERIAL 2 /* .. on DUART2 */ #define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */ #define CONFIG_BOARD_EARLY_INIT_R 1 -#endif /* !CONFIG_TQM8560 */ #endif /* CONFIG_TQM8560 */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -194,11 +192,10 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif - /* * I2C */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ @@ -219,7 +216,7 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ #define CFG_EEPROM_PAGE_WRITE_ENABLE #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ +#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ /* I2C SYSMON (LM75) */ #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ @@ -242,7 +239,7 @@ #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0xe2000000 #define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ #if defined(CONFIG_PCI) @@ -254,8 +251,7 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ -#endif /* CONFIG_PCI */ - +#endif /* CONFIG_PCI */ #define CONFIG_NET_MULTI 1 @@ -305,7 +301,7 @@ * FCC2: a - c (X50.2 - 1) */ #define CONFIG_ETHER_ON_FCC -#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */ +#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */ #endif #if defined(CONFIG_TQM8560) @@ -321,12 +317,13 @@ * FCC3: a - d (X50.2 - 3) */ #define CONFIG_ETHER_ON_FCC -#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */ +#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */ #endif #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1) #define CONFIG_ETHER_ON_FCC1 -#define CFG_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK) +#define CFG_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \ + CMXFCR_TF1CS_MSK) #define CFG_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12) #define CFG_CPMFCR_RAMTYPE 0 #define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) @@ -334,7 +331,8 @@ #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2) #define CONFIG_ETHER_ON_FCC2 -#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) +#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \ + CMXFCR_TF2CS_MSK) #define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13) #define CFG_CPMFCR_RAMTYPE 0 #define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) @@ -342,7 +340,8 @@ #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3) #define CONFIG_ETHER_ON_FCC3 -#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) +#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \ + CMXFCR_TF3CS_MSK) #define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14) #define CFG_CPMFCR_RAMTYPE 0 #define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) @@ -353,7 +352,7 @@ */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x20000) -#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ +#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) @@ -361,8 +360,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_TIMESTAMP /* Print image info with ts */ - +#define CONFIG_TIMESTAMP /* Print image info with ts */ /* * BOOTP options @@ -372,7 +370,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -389,10 +386,9 @@ #define CONFIG_CMD_MII #if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -403,12 +399,13 @@ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) - #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else - #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buf Size */ +#define CFG_PBSIZE (CFG_CBSIZE + \ + sizeof(CFG_PROMPT) + 16) /* Print Buf Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ @@ -433,7 +430,6 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif - #define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/ #define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ @@ -467,10 +463,10 @@ "ramdisk_addr=FE180000\0" \ "load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0" \ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ - "cp.b 100000 fffc0000 40000;" \ + "cp.b 100000 fffc0000 40000;" \ "setenv filesize;saveenv\0" \ "upd=run load update\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */