From: Stefan Herbrechtsmeier Date: Fri, 5 Aug 2022 06:16:28 +0000 (+0200) Subject: zynq: Convert arm twd timer to DM driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b7e0750d8872;p=u-boot.git zynq: Convert arm twd timer to DM driver Move arm twd timer driver from zynq to generic location. DM timer drivers are designed differently to original driver. Timer is counting up and not down. Information about clock rates are find out in timer_pre_probe() that's why there is no need to get any additional information from DT in the driver itself (only register offset). Signed-off-by: Stefan Herbrechtsmeier Link: https://lore.kernel.org/r/20220805061629.1207-1-stefan.herbrechtsmeier-oss@weidmueller.com Signed-off-by: Michal Simek --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d6c5658ee8..3649222470 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1259,6 +1259,7 @@ config ARCH_VF610 config ARCH_ZYNQ bool "Xilinx Zynq based platform" + select ARM_TWD_TIMER select CLK select CLK_ZYNQ select CPU_V7A @@ -1278,7 +1279,9 @@ config ARCH_ZYNQ select SPL_DM_SPI_FLASH if SPL select SPL_OF_CONTROL if SPL select SPL_SEPARATE_BSS if SPL + select SPL_TIMER if SPL select SUPPORT_SPL + select TIMER imply ARCH_EARLY_INIT_R imply BOARD_LATE_INIT imply CMD_CLK diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 37155df0fd..a7ca00fb76 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -416,6 +416,7 @@ }; scutimer: timer@f8f00600 { + u-boot,dm-pre-reloc; interrupt-parent = <&intc>; interrupts = <1 13 0x301>; compatible = "arm,cortex-a9-twd-timer"; diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index 8737f434d9..d9b2b999e1 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -6,7 +6,6 @@ # (C) Copyright 2008 # Guennadi Liakhovetki, DENX Software Engineering, -obj-y := timer.o obj-y += cpu.o obj-y += ddrc.o obj-y += slcr.o diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c index 27f6bf2183..1945f60e08 100644 --- a/arch/arm/mach-zynq/clk.c +++ b/arch/arm/mach-zynq/clk.c @@ -52,10 +52,12 @@ int set_cpu_clk_info(void) return ret; rate = clk_get_rate(&clk) / 1000000; - if (i) + if (i) { gd->bd->bi_ddr_freq = rate; - else + } else { gd->bd->bi_arm_freq = rate; + gd->cpu_clk = clk_get_rate(&clk); + } clk_free(&clk); } diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c deleted file mode 100644 index a51822a530..0000000000 --- a/arch/arm/mach-zynq/timer.c +++ /dev/null @@ -1,113 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2017 Weidmüller Interface GmbH & Co. KG - * Stefan Herbrechtsmeier - * - * Copyright (C) 2012 Michal Simek - * Copyright (C) 2011-2017 Xilinx, Inc. All rights reserved. - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, - * - * (C) Copyright 2004 - * Philippe Robin, ARM Ltd. - * - * (C) Copyright 2002-2004 - * Gary Jennejohn, DENX Software Engineering, - * - * (C) Copyright 2003 - * Texas Instruments - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Alex Zuepke - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -struct scu_timer { - u32 load; /* Timer Load Register */ - u32 counter; /* Timer Counter Register */ - u32 control; /* Timer Control Register */ -}; - -static struct scu_timer *timer_base = - (struct scu_timer *)ZYNQ_SCUTIMER_BASEADDR; - -#define SCUTIMER_CONTROL_PRESCALER_MASK 0x0000FF00 /* Prescaler */ -#define SCUTIMER_CONTROL_PRESCALER_SHIFT 8 -#define SCUTIMER_CONTROL_AUTO_RELOAD_MASK 0x00000002 /* Auto-reload */ -#define SCUTIMER_CONTROL_ENABLE_MASK 0x00000001 /* Timer enable */ - -#define TIMER_LOAD_VAL 0xFFFFFFFF -#define TIMER_PRESCALE 255 - -int timer_init(void) -{ - const u32 emask = SCUTIMER_CONTROL_AUTO_RELOAD_MASK | - (TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) | - SCUTIMER_CONTROL_ENABLE_MASK; - - struct udevice *dev; - struct clk clk; - int ret; - - ret = uclass_get_device_by_driver(UCLASS_CLK, - DM_DRIVER_GET(zynq_clk), &dev); - if (ret) - return ret; - - clk.id = cpu_6or4x_clk; - ret = clk_request(dev, &clk); - if (ret < 0) - return ret; - - gd->cpu_clk = clk_get_rate(&clk); - - clk_free(&clk); - - gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1); - - /* Load the timer counter register */ - writel(0xFFFFFFFF, &timer_base->load); - - /* - * Start the A9Timer device - * Enable Auto reload mode, Clear prescaler control bits - * Set prescaler value, Enable the decrementer - */ - clrsetbits_le32(&timer_base->control, SCUTIMER_CONTROL_PRESCALER_MASK, - emask); - - /* Reset time */ - gd->arch.lastinc = readl(&timer_base->counter) / - (gd->arch.timer_rate_hz / CONFIG_SYS_HZ); - gd->arch.tbl = 0; - - return 0; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return gd->arch.timer_rate_hz; -} diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig index 4049290148..1b49236039 100644 --- a/drivers/timer/Kconfig +++ b/drivers/timer/Kconfig @@ -73,6 +73,12 @@ config ARC_TIMER usually at least one of them exists. Either of them is supported in U-Boot. +config ARM_TWD_TIMER + bool "ARM timer watchdog (TWD) timer support" + depends on TIMER && CLK + help + Select this to enable support for the ARM global timer watchdog timer. + config AST_TIMER bool "Aspeed ast2400/ast2500 timer support" depends on TIMER diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile index 560e2d27e1..7bfb7749e9 100644 --- a/drivers/timer/Makefile +++ b/drivers/timer/Makefile @@ -6,6 +6,7 @@ obj-y += timer-uclass.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_ANDES_PLMT_TIMER) += andes_plmt_timer.o obj-$(CONFIG_ARC_TIMER) += arc_timer.o +obj-$(CONFIG_ARM_TWD_TIMER) += arm_twd_timer.o obj-$(CONFIG_AST_TIMER) += ast_timer.o obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o obj-$(CONFIG_$(SPL_)ATMEL_PIT_TIMER) += atmel_pit_timer.o diff --git a/drivers/timer/arm_twd_timer.c b/drivers/timer/arm_twd_timer.c new file mode 100644 index 0000000000..40ccd16587 --- /dev/null +++ b/drivers/timer/arm_twd_timer.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017-2022 Weidmüller Interface GmbH & Co. KG + * Stefan Herbrechtsmeier + * + * Copyright (C) 2012 Michal Simek + * Copyright (C) 2011-2017 Xilinx, Inc. All rights reserved. + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, + * + * (C) Copyright 2004 + * Philippe Robin, ARM Ltd. + * + * (C) Copyright 2002-2004 + * Gary Jennejohn, DENX Software Engineering, + * + * (C) Copyright 2003 + * Texas Instruments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Alex Zuepke + */ + +#include +#include +#include +#include +#include + +#include + +#define SCUTIMER_CONTROL_PRESCALER_MASK 0x0000FF00 /* Prescaler */ +#define SCUTIMER_CONTROL_AUTO_RELOAD_MASK 0x00000002 /* Auto-reload */ +#define SCUTIMER_CONTROL_ENABLE_MASK 0x00000001 /* Timer enable */ + +#define TIMER_LOAD_VAL 0xFFFFFFFF + +struct arm_twd_timer_regs { + u32 load; /* Timer Load Register */ + u32 counter; /* Timer Counter Register */ + u32 control; /* Timer Control Register */ +}; + +struct arm_twd_timer_priv { + struct arm_twd_timer_regs *base; +}; + +static u64 arm_twd_timer_get_count(struct udevice *dev) +{ + struct arm_twd_timer_priv *priv = dev_get_priv(dev); + struct arm_twd_timer_regs *regs = priv->base; + u32 count = TIMER_LOAD_VAL - readl(®s->counter); + + return timer_conv_64(count); +} + +static int arm_twd_timer_probe(struct udevice *dev) +{ + struct arm_twd_timer_priv *priv = dev_get_priv(dev); + struct arm_twd_timer_regs *regs; + fdt_addr_t addr; + + addr = dev_read_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->base = (struct arm_twd_timer_regs *)addr; + + regs = priv->base; + + /* Load the timer counter register */ + writel(0xFFFFFFFF, ®s->load); + + /* + * Start the A9Timer device + * Enable Auto reload mode, Clear prescaler control bits + * Set prescaler value, Enable the decrementer + */ + clrsetbits_le32(®s->control, SCUTIMER_CONTROL_PRESCALER_MASK, + SCUTIMER_CONTROL_AUTO_RELOAD_MASK | + SCUTIMER_CONTROL_ENABLE_MASK); + + return 0; +} + +static const struct timer_ops arm_twd_timer_ops = { + .get_count = arm_twd_timer_get_count, +}; + +static const struct udevice_id arm_twd_timer_ids[] = { + { .compatible = "arm,cortex-a9-twd-timer" }, + {} +}; + +U_BOOT_DRIVER(arm_twd_timer) = { + .name = "arm_twd_timer", + .id = UCLASS_TIMER, + .of_match = arm_twd_timer_ids, + .priv_auto = sizeof(struct arm_twd_timer_priv), + .probe = arm_twd_timer_probe, + .ops = &arm_twd_timer_ops, +};