From: Sergei Shtylyov Date: Mon, 23 Apr 2007 13:30:39 +0000 (+0200) Subject: [PATCH] Avoid assigning PCI resources from zero address X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b7598a43f2b4;p=u-boot.git [PATCH] Avoid assigning PCI resources from zero address If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE core complains and IDE drivers fails to work. Also, assigning zero to a BAR was illegal according to PCI 2.1 (the later revisions seem to have excluded the sentence about "0" being considered an invalid address) -- so, use a reasonable starting value of 0x1000 (that's what the most Linux archs are using). Alternatively, one might have fixed the calls to pci_set_region() individually (some code even seems to have taken care of this issue) but that would have been a lot more work. :-) Signed-off-by: Sergei Shtylyov Acked-by: Stefan Roese --- diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c index 969167555e..f170c2db89 100644 --- a/drivers/pci_auto.c +++ b/drivers/pci_auto.c @@ -34,7 +34,12 @@ void pciauto_region_init(struct pci_region* res) { - res->bus_lower = res->bus_start; + /* + * Avoid allocating PCI resources from address 0 -- this is illegal + * according to PCI 2.1 and moreover, this is known to cause Linux IDE + * drivers to fail. Use a reasonable starting value of 0x1000 instead. + */ + res->bus_lower = res->bus_start ? res->bus_start : 0x1000; } void pciauto_region_align(struct pci_region *res, unsigned long size)