From: Chris Morgan <macromorgan@hotmail.com>
Date: Mon, 5 Feb 2024 18:58:53 +0000 (-0600)
Subject: board: rockchip: Add support for Powkiddy RGB10MAX3
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b7202ebcebe1d70de522831a5b6c8ce063629d90;p=u-boot.git

board: rockchip: Add support for Powkiddy RGB10MAX3

Add support to the RGxx3 device for the Powkiddy RGB10MAX3. This device
is extremely similar to all the other devices and can use the same
bootloader with the same detection logic.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3.dts b/arch/arm/dts/rk3566-anbernic-rgxx3.dts
index 9e0aa9e63b..c393c8d07a 100644
--- a/arch/arm/dts/rk3566-anbernic-rgxx3.dts
+++ b/arch/arm/dts/rk3566-anbernic-rgxx3.dts
@@ -12,9 +12,12 @@
  * set the correct dtb name for loading mainline Linux automatically.
  */
 	model = "RGXX3";
-	compatible = "anbernic,rg353m", "anbernic,rg353p",
-		     "anbernic,rg353v", "anbernic,rg353vs",
-		     "anbernic,rg503", "rockchip,rk3566";
+	compatible = "anbernic,rg-arc-d", "anbernic,rg-arc-s",
+		     "anbernic,rg353m", "anbernic,rg353p",
+		     "anbernic,rg353ps", "anbernic,rg353v",
+		     "anbernic,rg353vs", "anbernic,rg503",
+		     "powkiddy,rgb10max3", "powkiddy,rgb30",
+		     "powkiddy,rk2023", "rockchip,rk3566";
 };
 
 &cru {
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index d05502f67a..5c57b902d1 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -50,6 +50,7 @@ enum rgxx3_device_id {
 	RGB30,
 	RK2023,
 	RGARCD,
+	RGB10MAX3,
 	/* Devices with duplicate ADC value */
 	RG353PS,
 	RG353VS,
@@ -107,6 +108,13 @@ static const struct rg3xx_model rg3xx_model_details[] = {
 		.fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-d.dtb",
 		.detect_panel = 0,
 	},
+	[RGB10MAX3] = {
+		.adc_value = 765, /* Observed average from device */
+		.board = "rk3566-powkiddy-rgb10max3",
+		.board_name = "Powkiddy RGB10MAX3",
+		.fdtfile = DTB_DIR "rk3566-powkiddy-rgb10max3.dtb",
+		.detect_panel = 0,
+	},
 	/* Devices with duplicate ADC value */
 	[RG353PS] = {
 		.adc_value = 860, /* Observed average from device */
diff --git a/doc/board/anbernic/rgxx3.rst b/doc/board/anbernic/rgxx3.rst
index d159ed2f76..1e63e6951e 100644
--- a/doc/board/anbernic/rgxx3.rst
+++ b/doc/board/anbernic/rgxx3.rst
@@ -17,6 +17,7 @@ This allows U-Boot to boot the following Anbernic devices:
 Additionally, the following very similar non-Anbernic devices are also
 supported:
 
+ - Powkiddy RGB10MAX3
  - Powkiddy RGB30
  - Powkiddy RK2023