From: Philip Oberfichtner Date: Wed, 17 Aug 2022 13:07:13 +0000 (+0200) Subject: ARM: cache: Allow SPL to build cache-pl310.c X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b6664eace8a26f0850ffa0a3e349ca2ffa960f2a;p=u-boot.git ARM: cache: Allow SPL to build cache-pl310.c Introduce the new Kconfig symbol CONFIG_SPL_SYS_L2_PL310 to allow the SPL to build cache-pl310.c. Before this commit, the SPL could enable the PL310 L2 cache [1], but the cache maintenance functions from cache-pl310.c were only useable for non-SPL builds. After enabling the cache one must be able to flush it, too. Thus this commit allows cache-pl310.c to be included in the SPL build. [1] See for example arch/arm/mach-imx/cache.c: v7_outer_cache_enable() Signed-off-by: Philip Oberfichtner --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 456a7faee4..d6c5658ee8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -493,6 +493,11 @@ config SYS_L2_PL310 help Enable support for ARM PL310 L2 cache controller in U-Boot +config SPL_SYS_L2_PL310 + bool "ARM PL310 L2 cache controller in SPL" + help + Enable support for ARM PL310 L2 cache controller in SPL + config SYS_L2CACHE_OFF bool "L2cache off" help diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index c603fe61bc..d137b4bf0f 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o -obj-$(CONFIG_SYS_L2_PL310) += cache-pl310.o else obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o obj-$(CONFIG_SPL_FRAMEWORK) += zimage.o @@ -46,6 +45,7 @@ else obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o endif +obj-$(CONFIG_$(SPL_TPL_)SYS_L2_PL310) += cache-pl310.o obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o ifneq ($(filter y,$(CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR) $(CONFIG_SAVE_PREV_BL_FDT_ADDR)),)