From: Tom Rini Date: Tue, 17 Aug 2021 21:59:38 +0000 (-0400) Subject: arm: shc: Change CONFIG_SYS_I2C_EEPROM_ADDR to EEPROM_ADDR X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b61d18c07de68771fd347cf0ccf3e06ce5ddc298;p=u-boot.git arm: shc: Change CONFIG_SYS_I2C_EEPROM_ADDR to EEPROM_ADDR The shc platforms do not make use of the rest of the EEPROM infrastructure. Rather than make more elaborate Kconfig logic, remove this setting from the CONFIG namespace. Cc: Heiko Schocher Signed-off-by: Tom Rini Reviewed-by: Heiko Schocher --- diff --git a/board/bosch/shc/board.c b/board/bosch/shc/board.c index 13fd25e407..a7a9775fdf 100644 --- a/board/bosch/shc/board.c +++ b/board/bosch/shc/board.c @@ -51,16 +51,17 @@ static int shc_eeprom_valid; /* * Read header information from EEPROM into global structure. */ +#define EEPROM_ADDR 0x50 static int read_eeprom(void) { /* Check if baseboard eeprom is available */ - if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + if (i2c_probe(EEPROM_ADDR)) { puts("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n"); return -ENODEV; } /* read the eeprom using i2c */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, + if (i2c_read(EEPROM_ADDR, 0, 2, (uchar *)&header, sizeof(header))) { puts("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n"); return -EIO; diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 387d50d511..5b0eba9afa 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -225,7 +225,6 @@ #define CONFIG_NET_RETRY_COUNT 10 /* I2C configuration */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_SPEED 400000 #define CONFIG_SYS_I2C_SLAVE 1