From: Vignesh R <vigneshr@ti.com>
Date: Wed, 6 Jul 2016 04:50:57 +0000 (+0530)
Subject: ARM: dts: K2G: Add support for QSPI controller
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b60774fff1d2098c79cf1efb1e242f5f662ce317;p=u-boot.git

ARM: dts: K2G: Add support for QSPI controller

K2G SoC has a Cadence QSPI controller to communicate with NOR flash
devices. Add DT nodes to support the same.
Also, K2G EVM has a s25fl512s flash connect to QSPI bus at CS 0. Add nor
flash slave node for the same.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
---

diff --git a/arch/arm/dts/k2g-evm.dts b/arch/arm/dts/k2g-evm.dts
index 38ca7ae1b6..e95efd4767 100644
--- a/arch/arm/dts/k2g-evm.dts
+++ b/arch/arm/dts/k2g-evm.dts
@@ -55,3 +55,48 @@
 		};
 	};
 };
+
+&qspi {
+	status = "okay";
+
+        flash0: m25p80@0 {
+                compatible = "s25fl512s","spi-flash";
+                reg = <0>;
+                spi-tx-bus-width = <1>;
+                spi-rx-bus-width = <4>;
+                spi-max-frequency = <96000000>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+                tshsl-ns = <392>;
+                tsd2d-ns = <392>;
+                tchsh-ns = <100>;
+                tslch-ns = <100>;
+		block-size = <18>;
+
+
+                partition@0 {
+                        label = "QSPI.u-boot-spl-os";
+                        reg = <0x00000000 0x00100000>;
+                };
+                partition@1 {
+                        label = "QSPI.u-boot-env";
+                        reg = <0x00100000 0x00040000>;
+                };
+                partition@2 {
+                        label = "QSPI.skern";
+                        reg = <0x00140000 0x0040000>;
+                };
+                partition@3 {
+                        label = "QSPI.pmmc-firmware";
+                        reg = <0x00180000 0x0040000>;
+                };
+                partition@4 {
+                        label = "QSPI.kernel";
+                        reg = <0x001C0000 0x0800000>;
+                };
+                partition@5 {
+                        label = "QSPI.file-system";
+                        reg = <0x009C0000 0x3640000>;
+                };
+        };
+};
diff --git a/arch/arm/dts/k2g.dtsi b/arch/arm/dts/k2g.dtsi
index 88b1a8e998..00cd492973 100644
--- a/arch/arm/dts/k2g.dtsi
+++ b/arch/arm/dts/k2g.dtsi
@@ -23,6 +23,7 @@
 		spi1 = &spi1;
 		spi2 = &spi2;
 		spi3 = &spi3;
+		spi4 = &qspi;
 	};
 
 	memory {
@@ -84,6 +85,19 @@
 			bus_freq = <2500000>;
 		};
 
+		qspi: qspi@2940000 {
+			compatible =  "cadence,qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02940000 0x1000>,
+			      <0x24000000 0x4000000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+			num-cs = <4>;
+			fifo-depth = <256>;
+			sram-size = <256>;
+			status = "disabled";
+		};
+
 		#include "k2g-netcp.dtsi"
 
 		pmmc: pmmc@2900000 {