From: Volodymyr Babchuk Date: Mon, 11 Mar 2024 21:33:45 +0000 (+0000) Subject: clk: qcom: add support for power domains uclass X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b563e766fe619ddfe9fb85ec05cfb9312f8fdb63;p=u-boot.git clk: qcom: add support for power domains uclass Now sub-drivers for particular SoCs can register them as power domain drivers. This is needed for upcoming SM8150 support, because it needs to power up the Ethernet module. Signed-off-by: Volodymyr Babchuk Reviewed-by: Sumit Garg Reviewed-by: Caleb Connolly [caleb: make ARCH_SNAPDRAGON select POWER_DOMAIN] Signed-off-by: Caleb Connolly --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a0842e1933..4cdf08dd69 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1078,6 +1078,7 @@ config ARCH_SNAPDRAGON select DM_GPIO select DM_SERIAL select DM_RESET + select POWER_DOMAIN select GPIO_EXTRA_HEADER select MSM_SMEM select OF_CONTROL diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 0df0d1881a..8dae635ac2 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -2,7 +2,7 @@ if ARCH_SNAPDRAGON || ARCH_IPQ40XX config CLK_QCOM bool - depends on CLK && DM_RESET + depends on CLK && DM_RESET && POWER_DOMAIN def_bool n menu "Qualcomm clock drivers" diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c index 729d190c54..7a5938a06a 100644 --- a/drivers/clk/qcom/clock-qcom.c +++ b/drivers/clk/qcom/clock-qcom.c @@ -22,7 +22,9 @@ #include #include #include +#include #include +#include #include "clock-qcom.h" @@ -30,6 +32,13 @@ #define CBCR_BRANCH_ENABLE_BIT BIT(0) #define CBCR_BRANCH_OFF_BIT BIT(31) +#define GDSC_SW_COLLAPSE_MASK BIT(0) +#define GDSC_POWER_DOWN_COMPLETE BIT(15) +#define GDSC_POWER_UP_COMPLETE BIT(16) +#define GDSC_PWR_ON_MASK BIT(31) +#define CFG_GDSCR_OFFSET 0x4 +#define GDSC_STATUS_POLL_TIMEOUT_US 1500 + /* Enable clock controlled by CBC soft macro */ void clk_enable_cbc(phys_addr_t cbcr) { @@ -223,7 +232,7 @@ U_BOOT_DRIVER(qcom_clk) = { int qcom_cc_bind(struct udevice *parent) { struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(parent); - struct udevice *clkdev, *rstdev; + struct udevice *clkdev = NULL, *rstdev = NULL, *pwrdev; struct driver *drv; int ret; @@ -238,20 +247,41 @@ int qcom_cc_bind(struct udevice *parent) if (ret) return ret; - /* Bail out early if resets are not specified for this platform */ - if (!data->resets) - return ret; + if (data->resets) { + /* Get a handle to the common reset handler */ + drv = lists_driver_lookup_name("qcom_reset"); + if (!drv) { + ret = -ENOENT; + goto unbind_clkdev; + } + + /* Register the reset controller */ + ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data, + dev_ofnode(parent), &rstdev); + if (ret) + goto unbind_clkdev; + } - /* Get a handle to the common reset handler */ - drv = lists_driver_lookup_name("qcom_reset"); - if (!drv) - return -ENOENT; + if (data->power_domains) { + /* Get a handle to the common power domain handler */ + drv = lists_driver_lookup_name("qcom_power"); + if (!drv) { + ret = -ENOENT; + goto unbind_rstdev; + } + /* Register the power domain controller */ + ret = device_bind_with_driver_data(parent, drv, "qcom_power", (ulong)data, + dev_ofnode(parent), &pwrdev); + if (ret) + goto unbind_rstdev; + } - /* Register the reset controller */ - ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data, - dev_ofnode(parent), &rstdev); - if (ret) - device_unbind(clkdev); + return 0; + +unbind_rstdev: + device_unbind(rstdev); +unbind_clkdev: + device_unbind(clkdev); return ret; } @@ -306,3 +336,79 @@ U_BOOT_DRIVER(qcom_reset) = { .ops = &qcom_reset_ops, .probe = qcom_reset_probe, }; + +static int qcom_power_set(struct power_domain *pwr, bool on) +{ + struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(pwr->dev); + void __iomem *base = dev_get_priv(pwr->dev); + const struct qcom_power_map *map; + u32 value; + int ret; + + if (pwr->id >= data->num_power_domains) + return -ENODEV; + + map = &data->power_domains[pwr->id]; + + if (!map->reg) + return -ENODEV; + + value = readl(base + map->reg); + + if (on) + value &= ~GDSC_SW_COLLAPSE_MASK; + else + value |= GDSC_SW_COLLAPSE_MASK; + + writel(value, base + map->reg); + + if (on) + ret = readl_poll_timeout(base + map->reg + CFG_GDSCR_OFFSET, + value, + (value & GDSC_POWER_UP_COMPLETE) || + (value & GDSC_PWR_ON_MASK), + GDSC_STATUS_POLL_TIMEOUT_US); + + else + ret = readl_poll_timeout(base + map->reg + CFG_GDSCR_OFFSET, + value, + (value & GDSC_POWER_DOWN_COMPLETE) || + !(value & GDSC_PWR_ON_MASK), + GDSC_STATUS_POLL_TIMEOUT_US); + + + if (ret == -ETIMEDOUT) + printf("WARNING: GDSC %lu is stuck during power on/off\n", + pwr->id); + return ret; +} + +static int qcom_power_on(struct power_domain *pwr) +{ + return qcom_power_set(pwr, true); +} + +static int qcom_power_off(struct power_domain *pwr) +{ + return qcom_power_set(pwr, false); +} + +static const struct power_domain_ops qcom_power_ops = { + .on = qcom_power_on, + .off = qcom_power_off, +}; + +static int qcom_power_probe(struct udevice *dev) +{ + /* Set our priv pointer to the base address */ + dev_set_priv(dev, (void *)dev_read_addr(dev)); + + return 0; +} + +U_BOOT_DRIVER(qcom_power) = { + .name = "qcom_power", + .id = UCLASS_POWER_DOMAIN, + .ops = &qcom_power_ops, + .probe = qcom_power_probe, +}; diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h index 01088c1901..12a1eaec2b 100644 --- a/drivers/clk/qcom/clock-qcom.h +++ b/drivers/clk/qcom/clock-qcom.h @@ -59,9 +59,15 @@ struct qcom_reset_map { u8 bit; }; +struct qcom_power_map { + unsigned int reg; +}; + struct clk; struct msm_clk_data { + const struct qcom_power_map *power_domains; + unsigned long num_power_domains; const struct qcom_reset_map *resets; unsigned long num_resets; const struct gate_clk *clks;