From: MarkLee Date: Tue, 21 Jan 2020 11:31:57 +0000 (+0800) Subject: eth: mtk-eth: add sgmii mode support in mediatek eth driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b4ef49a905052f9f765d3e1b1e18244202de3083;p=u-boot.git eth: mtk-eth: add sgmii mode support in mediatek eth driver This patch add sgmii init part for the mediatek SoC that support sgmii mode. It is a must for mt7622. Signed-off-by: MarkLee --- diff --git a/drivers/net/mtk_eth.c b/drivers/net/mtk_eth.c index c22e590387..8354e82244 100644 --- a/drivers/net/mtk_eth.c +++ b/drivers/net/mtk_eth.c @@ -151,6 +151,7 @@ struct mtk_eth_priv { void __iomem *fe_base; void __iomem *gmac_base; void __iomem *ethsys_base; + void __iomem *sgmii_base; struct mii_dev *mdio_bus; int (*mii_read)(struct mtk_eth_priv *priv, u8 phy, u8 reg); @@ -750,6 +751,24 @@ static int mtk_phy_probe(struct udevice *dev) return 0; } +static void mtk_sgmii_init(struct mtk_eth_priv *priv) +{ + /* Set SGMII GEN2 speed(2.5G) */ + clrsetbits_le32(priv->sgmii_base + SGMSYS_GEN2_SPEED, + SGMSYS_SPEED_2500, SGMSYS_SPEED_2500); + + /* Disable SGMII AN */ + clrsetbits_le32(priv->sgmii_base + SGMSYS_PCS_CONTROL_1, + SGMII_AN_ENABLE, 0); + + /* SGMII force mode setting */ + writel(SGMII_FORCE_MODE, priv->sgmii_base + SGMSYS_SGMII_MODE); + + /* Release PHYA power down state */ + clrsetbits_le32(priv->sgmii_base + SGMSYS_QPHY_PWR_STATE_CTRL, + SGMII_PHYA_PWD, 0); +} + static void mtk_mac_init(struct mtk_eth_priv *priv) { int i, ge_mode = 0; @@ -758,8 +777,13 @@ static void mtk_mac_init(struct mtk_eth_priv *priv) switch (priv->phy_interface) { case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII: + ge_mode = GE_MODE_RGMII; + break; case PHY_INTERFACE_MODE_SGMII: ge_mode = GE_MODE_RGMII; + mtk_ethsys_rmw(priv, ETHSYS_SYSCFG0_REG, SYSCFG0_SGMII_SEL_M, + SYSCFG0_SGMII_SEL(priv->gmac_id)); + mtk_sgmii_init(priv); break; case PHY_INTERFACE_MODE_MII: case PHY_INTERFACE_MODE_GMII: @@ -1104,6 +1128,26 @@ static int mtk_eth_ofdata_to_platdata(struct udevice *dev) } } + if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII) { + /* get corresponding sgmii phandle */ + ret = dev_read_phandle_with_args(dev, "mediatek,sgmiisys", + NULL, 0, 0, &args); + if (ret) + return ret; + + regmap = syscon_node_to_regmap(args.node); + + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + priv->sgmii_base = regmap_get_range(regmap, 0); + + if (!priv->sgmii_base) { + dev_err(dev, "Unable to find sgmii\n"); + return -ENODEV; + } + } + /* check for switch first, otherwise phy will be used */ priv->sw = SW_NONE; priv->switch_init = NULL; diff --git a/drivers/net/mtk_eth.h b/drivers/net/mtk_eth.h index fe89a03739..9bb037d440 100644 --- a/drivers/net/mtk_eth.h +++ b/drivers/net/mtk_eth.h @@ -20,6 +20,8 @@ #define ETHSYS_SYSCFG0_REG 0x14 #define SYSCFG0_GE_MODE_S(n) (12 + ((n) * 2)) #define SYSCFG0_GE_MODE_M 0x3 +#define SYSCFG0_SGMII_SEL_M (0x3 << 8) +#define SYSCFG0_SGMII_SEL(gmac) ((!(gmac)) ? BIT(9) : BIT(8)) #define ETHSYS_CLKCFG0_REG 0x2c #define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11) @@ -30,6 +32,19 @@ #define GE_MODE_MII_PHY 2 #define GE_MODE_RMII 3 +/* SGMII subsystem config registers */ +#define SGMSYS_PCS_CONTROL_1 0x0 +#define SGMII_AN_ENABLE BIT(12) + +#define SGMSYS_SGMII_MODE 0x20 +#define SGMII_FORCE_MODE 0x31120019 + +#define SGMSYS_QPHY_PWR_STATE_CTRL 0xe8 +#define SGMII_PHYA_PWD BIT(4) + +#define SGMSYS_GEN2_SPEED 0x2028 +#define SGMSYS_SPEED_2500 BIT(2) + /* Frame Engine Registers */ /* PDMA */