From: Michal Simek Date: Fri, 27 Aug 2021 06:48:10 +0000 (+0200) Subject: Kconfig: Remove all default n/no options X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b4c2c151b14b;p=u-boot.git Kconfig: Remove all default n/no options default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini --- diff --git a/Kconfig b/Kconfig index 35d619f3fc..931a22806e 100644 --- a/Kconfig +++ b/Kconfig @@ -83,7 +83,6 @@ config CC_OPTIMIZE_FOR_SIZE config OPTIMIZE_INLINING bool "Allow compiler to uninline functions marked 'inline' in full U-Boot" - default n help This option determines if U-Boot forces gcc to inline the functions developers have marked 'inline'. Doing so takes away freedom from gcc to @@ -93,7 +92,6 @@ config OPTIMIZE_INLINING config SPL_OPTIMIZE_INLINING bool "Allow compiler to uninline functions marked 'inline' in SPL" depends on SPL - default n help This option determines if U-Boot forces gcc to inline the functions developers have marked 'inline'. Doing so takes away freedom from gcc to @@ -106,7 +104,6 @@ config ARCH_SUPPORTS_LTO config LTO bool "Enable Link Time Optimizations" depends on ARCH_SUPPORTS_LTO - default n help This option enables Link Time Optimization (LTO), a mechanism which allows the compiler to optimize between different compilation units. @@ -127,7 +124,6 @@ config LTO config TPL_OPTIMIZE_INLINING bool "Allow compiler to uninline functions marked 'inline' in TPL" depends on TPL - default n help This option determines if U-Boot forces gcc to inline the functions developers have marked 'inline'. Doing so takes away freedom from gcc to @@ -310,7 +306,6 @@ if EXPERT config SYS_MALLOC_DEFAULT_TO_INIT bool "Default malloc to init while reserving the memory for it" - default n help It may happen that one needs to move the dynamic allocation from one to another memory range, eg. when moving the malloc @@ -440,7 +435,6 @@ config SYS_HAS_SRAM default y if TARGET_PIC32MZDASK default y if TARGET_DEVKIT8000 default y if TARGET_TRICORDER - default n help Enable this to allow support for the on board SRAM. SRAM base address is controlled by CONFIG_SYS_SRAM_BASE. diff --git a/api/Kconfig b/api/Kconfig index 16731d3b4b..382aa4ad3f 100644 --- a/api/Kconfig +++ b/api/Kconfig @@ -2,7 +2,6 @@ menu "API" config API bool "Enable U-Boot API" - default n help This option enables the U-Boot API. See api/README for more information. diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 6ff201fa81..1a7c525cdb 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -104,13 +104,11 @@ endchoice config CPU_BIG_ENDIAN bool "Enable Big Endian Mode" - default n help Build kernel for Big Endian Mode of ARC CPU config SYS_ICACHE_OFF bool "Do not enable icache" - default n help Do not enable instruction cache in U-Boot. @@ -123,7 +121,6 @@ config SPL_SYS_ICACHE_OFF config SYS_DCACHE_OFF bool "Do not enable dcache" - default n help Do not enable data cache in U-Boot. @@ -136,14 +133,12 @@ config SPL_SYS_DCACHE_OFF menuconfig ARC_DBG bool "ARC debugging" - default n if ARC_DBG config ARC_DBG_IOC_ENABLE bool "Enable IO coherency unit" depends on CPU_ARCHS38 - default n help Enable IO coherency unit to debug problems with caches and DMA peripherals. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3b1e257215..b730d3ebd8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -110,7 +110,6 @@ config THUMB2_KERNEL config SYS_ICACHE_OFF bool "Do not enable icache" - default n help Do not enable instruction cache in U-Boot. @@ -123,7 +122,6 @@ config SPL_SYS_ICACHE_OFF config SYS_DCACHE_OFF bool "Do not enable dcache" - default n help Do not enable data cache in U-Boot. @@ -443,7 +441,6 @@ config ENABLE_ARM_SOC_BOOT0_HOOK config ARM_CORTEX_CPU_IS_UP bool - default n config USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy" @@ -1907,7 +1904,6 @@ config ARCH_SUPPORT_TFABOOT config TFABOOT bool "Support for booting from TF-A" depends on ARCH_SUPPORT_TFABOOT - default n help Some platforms support the setup of secure registers (for instance for CPU errata handling) or provide secure services like PSCI. diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index b7a10a8e34..0a3fdfa471 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -3,7 +3,6 @@ if ARM64 config ARMV8_SPL_EXCEPTION_VECTORS bool "Install crash dump exception vectors" depends on SPL - default n help The default exception vector table is only used for the crash dump, but still takes quite a lot of space in the image size. @@ -128,7 +127,6 @@ config PSCI_RESET config ARMV8_PSCI bool "Enable PSCI support" if EXPERT - default n help PSCI is Power State Coordination Interface defined by ARM. The PSCI in U-boot provides a general framework and each platform @@ -156,7 +154,6 @@ config ARMV8_PSCI_CPUS_PER_CLUSTER config ARMV8_EA_EL3_FIRST bool "External aborts and SError interrupt exception are taken in EL3" - default n help Exception handling at all exception levels for External Abort and SError interrupt exception are taken in EL3. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index b10b56d2d3..1e166c73e4 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -453,7 +453,6 @@ config QSPI_AHB_INIT config FSPI_AHB_EN_4BYTE bool "Enable 4-byte Fast Read command for AHB mode" - default n help The default setting for FlexSPI AHB bus just supports 3-byte addressing. But some FlexSPI flash sizes are up to 64MBytes. diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c90505e5ed..4448ca1592 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -298,7 +298,6 @@ endchoice config ATMEL_SFR bool - default n config SYS_SOC default "at91" diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 789a50d4e9..cb85ad2ae2 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -102,7 +102,6 @@ config MX6_OCRAM_256KB config MX6_DDRCAL bool "Include dynamic DDR calibration routines" depends on SPL - default n help Say "Y" if your board uses dynamic (per-boot) DDR calibration. If unsure, say N. diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index e067604d9b..134b6b17c2 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -8,7 +8,6 @@ config SYS_VENDOR config MT8512 bool "MediaTek MT8512 SoC" - default n choice prompt "MediaTek board select" diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 944bbee763..c6a4b07a9e 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -2,7 +2,6 @@ if ARCH_MVEBU config HAVE_MVEBU_EFUSE bool - default n config ARMADA_32BIT bool @@ -311,14 +310,12 @@ endchoice config MVEBU_EFUSE bool "Enable eFuse support" - default n depends on HAVE_MVEBU_EFUSE help Enable support for reading and writing eFuses on mvebu SoCs. config MVEBU_EFUSE_FAKE bool "Fake eFuse access (dry run)" - default n depends on MVEBU_EFUSE help This enables a "dry run" mode where eFuses are not really programmed. diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32 index d5e437f0d2..ea98bb00f3 100644 --- a/arch/arm/mach-rmobile/Kconfig.32 +++ b/arch/arm/mach-rmobile/Kconfig.32 @@ -133,7 +133,6 @@ config SYS_SOC config RMOBILE_EXTRAM_BOOT bool "Enable boot from RAM" depends on TARGET_ALT || TARGET_BLANCHE || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK || TARGET_STOUT - default n choice prompt "Qos setting primary" diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index 5d7eca649a..4a57014a21 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -190,7 +190,6 @@ config STM32_ECDSA_VERIFY config CMD_STM32KEY bool "command stm32key to fuse public key hash" - default n help fuse public key hash in corresponding fuse used to authenticate binary. diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 79c669a481..1d4a4fdd0c 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -629,7 +629,6 @@ config SYS_SOC config UART0_PORT_F bool "UART0 on MicroSD breakout board" - default n ---help--- Repurpose the SD card slot for getting access to the UART0 serial console. Primarily useful only for low level u-boot debugging on @@ -640,7 +639,6 @@ config UART0_PORT_F config OLD_SUNXI_KERNEL_COMPAT bool "Enable workarounds for booting old kernels" - default n ---help--- Set this to enable various workarounds for old kernels, this results in sub-optimal settings for newer kernels, only enable if needed. @@ -771,14 +769,12 @@ config I2C0_ENABLE config I2C1_ENABLE bool "Enable I2C/TWI controller 1" - default n select CMD_I2C ---help--- See I2C0_ENABLE help text. config I2C2_ENABLE bool "Enable I2C/TWI controller 2" - default n select CMD_I2C ---help--- See I2C0_ENABLE help text. @@ -786,7 +782,6 @@ config I2C2_ENABLE if MACH_SUN6I || MACH_SUN7I config I2C3_ENABLE bool "Enable I2C/TWI controller 3" - default n select CMD_I2C ---help--- See I2C0_ENABLE help text. @@ -805,7 +800,6 @@ endif if MACH_SUN7I config I2C4_ENABLE bool "Enable I2C/TWI controller 4" - default n select CMD_I2C ---help--- See I2C0_ENABLE help text. @@ -813,7 +807,6 @@ endif config AXP_GPIO bool "Enable support for gpio-s on axp PMICs" - default n ---help--- Say Y here to enable support for the gpio pins of the axp PMIC ICs. @@ -845,14 +838,12 @@ config VIDEO_HDMI config VIDEO_VGA bool "VGA output support" depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN7I) - default n ---help--- Say Y here to add support for outputting video over VGA. config VIDEO_VGA_VIA_LCD bool "VGA via LCD controller support" depends on VIDEO_SUNXI && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I) - default n ---help--- Say Y here to add support for external DACs connected to the parallel LCD interface driving a VGA connector, such as found on the @@ -861,7 +852,6 @@ config VIDEO_VGA_VIA_LCD config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH bool "Force sync active high for VGA via LCD controller support" depends on VIDEO_VGA_VIA_LCD - default n ---help--- Say Y here if you've a board which uses opendrain drivers for the vga hsync and vsync signals. Opendrain drivers cannot generate steep enough @@ -879,7 +869,6 @@ config VIDEO_VGA_EXTERNAL_DAC_EN config VIDEO_COMPOSITE bool "Composite video output support" depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) - default n ---help--- Say Y here to add support for outputting composite video. @@ -943,7 +932,6 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW config VIDEO_LCD_PANEL_I2C bool "LCD panel needs to be configured via i2c" depends on VIDEO_SUNXI - default n select CMD_I2C ---help--- Say y here if the LCD panel needs to be configured via i2c. This @@ -976,7 +964,6 @@ config VIDEO_LCD_IF_LVDS config SUNXI_DE2 bool - default n config VIDEO_DE2 bool "Display Engine 2 video driver" diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index fa221f1d04..ebfa8e668c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -346,7 +346,6 @@ config MIPS_RELOCATION_TABLE_SIZE config RESTORE_EXCEPTION_VECTOR_BASE bool "Restore exception vector base before booting linux kernel" - default n help In U-Boot the exception vector base will be moved to top of memory, to be used to display register dump when exception occurs. @@ -361,7 +360,6 @@ config RESTORE_EXCEPTION_VECTOR_BASE config OVERRIDE_EXCEPTION_VECTOR_BASE bool "Override the exception vector base to be restored" depends on RESTORE_EXCEPTION_VECTOR_BASE - default n help Enable this option if you want to use a different exception vector base rather than the previously saved one. @@ -376,7 +374,6 @@ config NEW_EXCEPTION_VECTOR_BASE config INIT_STACK_WITHOUT_MALLOC_F bool "Do not reserve malloc space on initial stack" - default n help Enable this option if you don't want to reserve malloc space on initial stack. This is useful if the initial stack can't hold large @@ -385,7 +382,6 @@ config INIT_STACK_WITHOUT_MALLOC_F config SPL_INIT_STACK_WITHOUT_MALLOC_F bool "Do not reserve malloc space on initial stack in SPL" - default n help Enable this option if you don't want to reserve malloc space on initial stack. This is useful if the initial stack can't hold large @@ -394,7 +390,6 @@ config SPL_INIT_STACK_WITHOUT_MALLOC_F config SPL_LOADER_SUPPORT bool - default n help Enable this option if you want to use SPL loaders without DM enabled. @@ -422,7 +417,6 @@ config MIPS_BOOT_ENV_LEGACY config MIPS_BOOT_FDT bool "Hand over a flattened device tree to Linux kernel" - default n help Enable this option if you want U-Boot to hand over a flattened device tree to the kernel. According to UHI register $a0 will be set @@ -501,7 +495,6 @@ config SYS_MIPS_CACHE_INIT_RAM_LOAD config MIPS_INIT_STACK_IN_SRAM bool - default n help Select this if the initial stack frame could be setup in SRAM. Normally the initial stack frame is set up in DRAM which is often @@ -512,7 +505,6 @@ config MIPS_INIT_STACK_IN_SRAM config MIPS_SRAM_INIT bool - default n depends on MIPS_INIT_STACK_IN_SRAM help Select this if the SRAM for initial stack needs to be initialized @@ -584,7 +576,6 @@ config MIPS_CM config MIPS_INSERT_BOOT_CONFIG bool - default n help Enable this to insert some board-specific boot configuration in the U-Boot binary at offset 0x10. diff --git a/arch/mips/mach-mtmips/mt7628/Kconfig b/arch/mips/mach-mtmips/mt7628/Kconfig index e3f56e782e..b25b20f92d 100644 --- a/arch/mips/mach-mtmips/mt7628/Kconfig +++ b/arch/mips/mach-mtmips/mt7628/Kconfig @@ -40,7 +40,6 @@ endchoice config SPL_UART2_SPIS_PINMUX bool "Use alternative pinmux for UART2 in SPL stage" depends on SPL_SERIAL_SUPPORT - default n help Select this if the UART2 of your board is connected to GPIO 16/17 (shared with SPIS) rather than the usual GPIO 20/21. diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig index b6f16bf124..435333720c 100644 --- a/arch/nds32/Kconfig +++ b/arch/nds32/Kconfig @@ -18,7 +18,6 @@ endchoice config SYS_ICACHE_OFF bool "Do not enable icache" - default n help Do not enable instruction cache in U-Boot. @@ -31,7 +30,6 @@ config SPL_SYS_ICACHE_OFF config SYS_DCACHE_OFF bool "Do not enable dcache" - default n help Do not enable data cache in U-Boot. diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 691ed11382..519507d570 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -35,7 +35,6 @@ endchoice config SYS_ICACHE_OFF bool "Do not enable icache" - default n help Do not enable instruction cache in U-Boot. @@ -48,7 +47,6 @@ config SPL_SYS_ICACHE_OFF config SYS_DCACHE_OFF bool "Do not enable dcache" - default n help Do not enable data cache in U-Boot. diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 300b48505e..b8d8ee3083 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -146,14 +146,12 @@ config HPET_ADDRESS config SMM_TSEG bool - default n config SMM_TSEG_SIZE hex config X86_RESET_VECTOR bool - default n select BINMAN # The following options control where the 16-bit and 32-bit init lies @@ -490,7 +488,7 @@ config FSP_SYS_MALLOC_F_LEN config FSP_USE_UPD bool depends on FSP_VERSION1 - default y + default y if !NORTHBRIDGE_INTEL_IVYBRIDGE help Most FSPs use UPD data region for some FSP customization. But there are still some FSPs that might not even have UPD. For such FSPs, @@ -536,7 +534,6 @@ config HAVE_MRC config CACHE_MRC_BIN bool depends on HAVE_MRC - default n help Enable caching for the memory reference code binary. This uses an MTRR (memory type range register) to turn on caching for the section @@ -605,7 +602,6 @@ config HAVE_MICROCODE config SMP bool "Enable Symmetric Multiprocessing" - default n help Enable use of more than one CPU in U-Boot and the Operating System when loaded. Each CPU will be started up and information can be @@ -745,7 +741,6 @@ menu "System tables" config GENERATE_PIRQ_TABLE bool "Generate a PIRQ table" - default n help Generate a PIRQ routing table for this board. The PIRQ routing table is generated by U-Boot in the system memory from 0xf0000 to 0xfffff @@ -769,7 +764,6 @@ config GENERATE_SFI_TABLE config GENERATE_MP_TABLE bool "Generate an MP (Multi-Processor) table" - default n help Generate an MP (Multi-Processor) table for this board. The MP table provides a way for the operating system to support for symmetric @@ -778,7 +772,6 @@ config GENERATE_MP_TABLE config GENERATE_ACPI_TABLE bool "Generate an ACPI (Advanced Configuration and Power Interface) table" - default n select QFW if QEMU help The Advanced Configuration and Power Interface (ACPI) specification diff --git a/arch/x86/cpu/ivybridge/Kconfig b/arch/x86/cpu/ivybridge/Kconfig index 2f42393786..be3ef5e5d8 100644 --- a/arch/x86/cpu/ivybridge/Kconfig +++ b/arch/x86/cpu/ivybridge/Kconfig @@ -45,7 +45,6 @@ config SMM_TSEG_SIZE config ENABLE_VMX bool "Enable VMX for virtualization" - default n help Virtual Machine Extensions are provided in many x86 CPUs. These provide various facilities for allowing a host OS to provide an @@ -64,10 +63,6 @@ config FSP_ADDR hex default 0xfff80000 -config FSP_USE_UPD - bool - default n - config FSP_BROKEN_HOB bool default y diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 6de31e8c1e..35e5b89dda 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -18,7 +18,6 @@ endchoice config SYS_ICACHE_OFF bool "Do not enable icache" - default n help Do not enable instruction cache in U-Boot. @@ -31,7 +30,6 @@ config SPL_SYS_ICACHE_OFF config SYS_DCACHE_OFF bool "Do not enable dcache" - default n help Do not enable data cache in U-Boot. diff --git a/board/beacon/imx8mn/Kconfig b/board/beacon/imx8mn/Kconfig index dceb3de654..65d2923918 100644 --- a/board/beacon/imx8mn/Kconfig +++ b/board/beacon/imx8mn/Kconfig @@ -11,11 +11,9 @@ config SYS_CONFIG_NAME config IMX8MN_FORCE_NOM_SOC bool "Force to use nominal mode for SOC and ARM" - default n config IMX8MN_BEACON_2GB_LPDDR bool "Enable 2GB LPDDR" - default n config IMX_CONFIG default "arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg" diff --git a/board/congatec/common/Kconfig b/board/congatec/common/Kconfig index 5c205bd830..d4a238de99 100644 --- a/board/congatec/common/Kconfig +++ b/board/congatec/common/Kconfig @@ -28,7 +28,6 @@ endif config VOL_MONITOR_LTC3882_READ depends on VID bool "Enable the LTC3882 voltage monitor read" - default n help This option enables LTC3882 voltage monitor read functionality. It is used by common VID driver. @@ -36,13 +35,11 @@ config VOL_MONITOR_LTC3882_READ config VOL_MONITOR_LTC3882_SET depends on VID bool "Enable the LTC3882 voltage monitor set" - default n help This option enables LTC3882 voltage monitor set functionality. It is used by common VID driver. config USB_TCPC bool "USB Typec port controller simple driver" - default n help Enable USB type-c port controller (TCPC) driver diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig index ab9c14ae88..1e3bb42b7e 100644 --- a/board/freescale/common/Kconfig +++ b/board/freescale/common/Kconfig @@ -23,7 +23,6 @@ config CMD_ESBC_VALIDATE config FSL_USE_PCA9547_MUX bool "Enable PCA9547 I2C Mux on Freescale boards" - default n help This option enables the PCA9547 I2C mux on Freescale boards. diff --git a/board/freescale/imx8mn_evk/Kconfig b/board/freescale/imx8mn_evk/Kconfig index eb37630718..0adf87bd42 100644 --- a/board/freescale/imx8mn_evk/Kconfig +++ b/board/freescale/imx8mn_evk/Kconfig @@ -11,7 +11,6 @@ config SYS_CONFIG_NAME config IMX8MN_LOW_DRIVE_MODE bool "Enable the low drive mode of iMX8MN on EVK board" - default n config IMX_CONFIG default "board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg" diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig index ca22c92203..40939816ad 100644 --- a/board/freescale/ls1028a/Kconfig +++ b/board/freescale/ls1028a/Kconfig @@ -14,7 +14,6 @@ config SYS_CONFIG_NAME config EMMC_BOOT bool "Support for booting from EMMC" - default n config SYS_TEXT_BASE default 0x96000000 if SD_BOOT || EMMC_BOOT @@ -53,7 +52,6 @@ config SYS_CONFIG_NAME config EMMC_BOOT bool "Support for booting from EMMC" - default n config SYS_TEXT_BASE default 0x96000000 if SD_BOOT || EMMC_BOOT diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig index 3d9e295c4e..778b8d8d5a 100644 --- a/board/freescale/ls1043ardb/Kconfig +++ b/board/freescale/ls1043ardb/Kconfig @@ -16,7 +16,6 @@ config SYS_CONFIG_NAME config SYS_HAS_ARMV8_SECURE_BASE bool "Enable secure address for PSCI image" depends on ARMV8_PSCI - default n help PSCI image can be re-located to secure RAM. If enabled, please also define the value for ARMV8_SECURE_BASE, diff --git a/board/freescale/t208xrdb/Kconfig b/board/freescale/t208xrdb/Kconfig index 8249c5df96..d4c061a5ea 100644 --- a/board/freescale/t208xrdb/Kconfig +++ b/board/freescale/t208xrdb/Kconfig @@ -11,7 +11,6 @@ config SYS_CONFIG_NAME config T2080RDB_REV_D bool "Support for T2080RDB revisions D and up" - default n source "board/freescale/common/Kconfig" diff --git a/board/keymile/km_arm/Kconfig b/board/keymile/km_arm/Kconfig index 6f55cfab86..c52b365b17 100644 --- a/board/keymile/km_arm/Kconfig +++ b/board/keymile/km_arm/Kconfig @@ -3,37 +3,31 @@ menu "KM ARM Options" config KM_FPGA_CONFIG bool "FPGA Configuration" - default n help Include capability to change FPGA configuration. config KM_FPGA_FORCE_CONFIG bool "FPGA reconfiguration" - default n help If yes we force to reconfigure the FPGA always config KM_FPGA_NO_RESET bool "FPGA skip reset" - default n help If yes we skip triggering a reset of the FPGA config KM_ENV_IS_IN_SPI_NOR bool "Environment in SPI NOR" - default n help Put the U-Boot environment in the SPI NOR flash. config KM_PIGGY4_88E6061 bool "Piggy via Switch 88E6061" - default n help The Piggy4 board is connected via a Marvell 88E6061 switch. config KM_PIGGY4_88E6352 bool "Piggy via Switch 88E6352" - default n help The Piggy4 board is connected via a Marvell 88E6352 switch. diff --git a/board/toradex/apalis_imx6/Kconfig b/board/toradex/apalis_imx6/Kconfig index 14f8c10c64..c6ff387351 100644 --- a/board/toradex/apalis_imx6/Kconfig +++ b/board/toradex/apalis_imx6/Kconfig @@ -48,7 +48,6 @@ config TDX_APALIS_IMX6_V1_0 This option configures DCE mode unconditionally. Whithout this option the config block stating V1.0 HW selects DCE mode, otherwise the UARTs are configuered in DTE mode. - default n source "board/toradex/common/Kconfig" diff --git a/cmd/Kconfig b/cmd/Kconfig index 41aba385ca..d8fc5a171b 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -471,7 +471,6 @@ config CMD_SAVEENV config CMD_ERASEENV bool "eraseenv" - default n depends on CMD_SAVEENV help Erase environment variables from the compiled-in persistent @@ -652,14 +651,12 @@ config LOOPW config CMD_MD5SUM bool "md5sum" - default n select MD5 help Compute MD5 checksum. config MD5SUM_VERIFY bool "md5sum -v" - default n depends on CMD_MD5SUM help Add -v option to verify data against an MD5 checksum. @@ -1119,7 +1116,6 @@ if CMD_MMC config CMD_BKOPS_ENABLE bool "mmc bkops enable" depends on CMD_MMC - default n help Enable command for setting manual background operations handshake on a eMMC device. The feature is optionally available on eMMC devices @@ -1447,7 +1443,6 @@ config CMD_SETEXPR config CMD_SETEXPR_FMT bool "setexpr_fmt" - default n depends on CMD_SETEXPR help Evaluate format string expression and store result in an environment @@ -1459,7 +1454,6 @@ menu "Android support commands" config CMD_AB_SELECT bool "ab_select" - default n depends on ANDROID_AB help On Android devices with more than one boot slot (multiple copies of @@ -1764,7 +1758,6 @@ config CMD_EFIDEBUG bool "efidebug - display/configure UEFI environment" depends on EFI_LOADER select EFI_DEVICE_PATH_TO_TEXT - default n help Enable the 'efidebug' command which provides a subset of UEFI shell utility with simplified functionality. It will be useful @@ -2367,7 +2360,6 @@ config CMD_TRACE config CMD_AVB bool "avb - Android Verified Boot 2.0 operations" depends on AVB_VERIFY - default n help Enables a "avb" command to perform verification of partitions using Android Verified Boot 2.0 functionality. It includes such subcommands: @@ -2407,7 +2399,6 @@ config CMD_UBI config CMD_UBI_RENAME bool "Enable rename" depends on CMD_UBI - default n help Enable a "ubi" command to rename ubi volume: ubi rename diff --git a/cmd/mvebu/Kconfig b/cmd/mvebu/Kconfig index 7c42c75afb..4afe0bf32d 100644 --- a/cmd/mvebu/Kconfig +++ b/cmd/mvebu/Kconfig @@ -3,7 +3,6 @@ depends on ARCH_MVEBU config CMD_MVEBU_BUBT bool "bubt" - default n help bubt - Burn a u-boot image to flash For details about bubt command please see the documentation diff --git a/common/Kconfig b/common/Kconfig index 4c774a4ffc..5c1151bf54 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -634,7 +634,6 @@ config TPL_HASH config STACKPROTECTOR bool "Stack Protector buffer overflow detection" - default n help Enable stack smash detection through compiler's stack-protector canary logic @@ -642,12 +641,10 @@ config STACKPROTECTOR config SPL_STACKPROTECTOR bool "Stack Protector buffer overflow detection for SPL" depends on STACKPROTECTOR && SPL - default n config TPL_STACKPROTECTOR bool "Stack Protector buffer overflow detection for TPL" depends on STACKPROTECTOR && TPL - default n endmenu @@ -655,7 +652,6 @@ menu "Update support" config UPDATE_COMMON bool - default n select DFU_WRITE_ALT config UPDATE_TFTP @@ -687,7 +683,6 @@ config UPDATE_FIT config ANDROID_AB bool "Android A/B updates" - default n help If enabled, adds support for the new Android A/B update model. This allows the bootloader to select which slot to boot from based on the diff --git a/common/Kconfig.boot b/common/Kconfig.boot index 3e18a371fe..e2780bdd8e 100644 --- a/common/Kconfig.boot +++ b/common/Kconfig.boot @@ -46,7 +46,6 @@ config FIT_SHA256 config FIT_SHA384 bool "Support SHA384 checksum of FIT image contents" - default n select SHA384 help Enable this to support SHA384 checksum of FIT image contents. A @@ -56,7 +55,6 @@ config FIT_SHA384 config FIT_SHA512 bool "Support SHA512 checksum of FIT image contents" - default n select SHA512 help Enable this to support SHA512 checksum of FIT image contents. A @@ -106,7 +104,6 @@ config FIT_SIGNATURE_MAX_SIZE config FIT_RSASSA_PSS bool "Support rsassa-pss signature scheme of FIT image contents" depends on FIT_SIGNATURE - default n help Enable this to support the pss padding algorithm as described in the rfc8017 (https://tools.ietf.org/html/rfc8017). @@ -727,7 +724,6 @@ config NOR_BOOT config NAND_BOOT bool "Support for booting from NAND flash" - default n imply MTD_RAW_NAND help Enabling this will make a U-Boot binary that is capable of being @@ -736,7 +732,6 @@ config NAND_BOOT config ONENAND_BOOT bool "Support for booting from ONENAND" - default n imply MTD_RAW_NAND help Enabling this will make a U-Boot binary that is capable of being @@ -745,7 +740,6 @@ config ONENAND_BOOT config QSPI_BOOT bool "Support for booting from QSPI flash" - default n help Enabling this will make a U-Boot binary that is capable of being booted via QSPI flash. This is not a must, some SoCs need this, @@ -753,7 +747,6 @@ config QSPI_BOOT config SATA_BOOT bool "Support for booting from SATA" - default n help Enabling this will make a U-Boot binary that is capable of being booted via SATA. This is not a must, some SoCs need this, @@ -761,7 +754,6 @@ config SATA_BOOT config SD_BOOT bool "Support for booting from SD/EMMC" - default n help Enabling this will make a U-Boot binary that is capable of being booted via SD/EMMC. This is not a must, some SoCs need this, @@ -769,7 +761,6 @@ config SD_BOOT config SPI_BOOT bool "Support for booting from SPI flash" - default n help Enabling this will make a U-Boot binary that is capable of being booted via SPI flash. This is not a must, some SoCs need this, @@ -803,7 +794,6 @@ config BOOTDELAY config AUTOBOOT_KEYED bool "Stop autobooting via specific input key / string" - default n help This option enables stopping (aborting) of the automatic boot feature only by issuing a specific input key or @@ -890,7 +880,6 @@ config AUTOBOOT_STOP_STR config AUTOBOOT_KEYED_CTRLC bool "Enable Ctrl-C autoboot interruption" depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION - default n help This option allows for the boot sequence to be interrupted by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". diff --git a/common/spl/Kconfig b/common/spl/Kconfig index c155a3b5fc..089774e83f 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -722,7 +722,6 @@ config SYS_MMCSD_FS_BOOT_PARTITION config SPL_MMC_TINY bool "Tiny MMC framework in SPL" depends on SPL_MMC_SUPPORT - default n help Enable MMC framework tinification support. This option is useful if if your SPL is extremely size constrained. Heed the warning, enable @@ -739,7 +738,6 @@ config SPL_MMC_TINY config SPL_MMC_WRITE bool "MMC/SD/SDIO card support for write operations in SPL" depends on SPL_MMC_SUPPORT - default n help Enable write access to MMC and SD Cards in SPL @@ -912,7 +910,6 @@ config SPL_UBI_LOAD_ARGS_ID config UBI_SPL_SILENCE_MSG bool "silence UBI SPL messages" - default n help Disable messages from UBI SPL. This leaves warnings and errors enabled. @@ -975,7 +972,6 @@ config SPL_ONENAND_SUPPORT config SPL_OS_BOOT bool "Activate Falcon Mode" depends on !TI_SECURE_DEVICE - default n help Enable booting directly to an OS from SPL. for more info read doc/README.falcon @@ -1422,7 +1418,6 @@ config TPL_LDSCRIPT config TPL_NEEDS_SEPARATE_TEXT_BASE bool "TPL needs a separate text-base" - default n depends on TPL help Enable, if the TPL stage should not inherit its text-base @@ -1431,7 +1426,6 @@ config TPL_NEEDS_SEPARATE_TEXT_BASE config TPL_NEEDS_SEPARATE_STACK bool "TPL needs a separate initial stack-pointer" - default n depends on TPL help Enable, if the TPL stage should not inherit its initial @@ -1638,7 +1632,6 @@ endif # TPL config SPL_AT91_MCK_BYPASS bool "Use external clock signal as a source of main clock for AT91 platforms" depends on ARCH_AT91 - default n help Use external 8 to 24 Mhz clock signal as source of main clock instead of an external crystal oscillator. diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 4023332dd9..56a4eec05a 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -52,14 +52,12 @@ config BLOCK_CACHE config SPL_BLOCK_CACHE bool "Use block device cache in SPL" depends on SPL_BLK - default n help This option enables the disk-block cache in SPL config TPL_BLOCK_CACHE bool "Use block device cache in TPL" depends on TPL_BLK - default n help This option enables the disk-block cache in TPL diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index 9ae188c1df..8f7703c8b5 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -80,7 +80,6 @@ config DM_DEVICE_REMOVE config SPL_DM_DEVICE_REMOVE bool "Support device removal in SPL" depends on SPL_DM - default n help We can save some code space by dropping support for removing a device. This is not normally required in SPL, so by default this @@ -107,7 +106,6 @@ config DM_SEQ_ALIAS config SPL_DM_SEQ_ALIAS bool "Support numbered aliases in device tree in SPL" depends on SPL_DM - default n help Most boards will have a '/aliases' node containing the path to numbered devices (e.g. serial0 = &serial0). This feature can be @@ -132,7 +130,6 @@ config TPL_DM_INLINE_OFNODE config DM_DMA bool "Support per-device DMA constraints" depends on DM - default n help Enable this to extract per-device DMA constraints, only supported on device-tree systems for now. This is needed in order translate @@ -274,7 +271,6 @@ config OF_TRANSLATE config SPL_OF_TRANSLATE bool "Translate addresses using fdt_translate_address in SPL" depends on SPL_DM && SPL_OF_CONTROL - default n help If this option is enabled, the reg property will be translated using the fdt_translate_address() function. This is necessary diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig index b50547476c..48e41bc262 100644 --- a/drivers/dfu/Kconfig +++ b/drivers/dfu/Kconfig @@ -16,7 +16,6 @@ config DFU_OVER_TFTP if DFU config DFU_WRITE_ALT bool - default n config DFU_TFTP bool "DFU via TFTP" diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig index 9cbd5f334d..87c026e049 100644 --- a/drivers/dma/ti/Kconfig +++ b/drivers/dma/ti/Kconfig @@ -9,7 +9,6 @@ config TI_K3_NAVSS_UDMA select TI_K3_NAVSS_RINGACC select TI_K3_NAVSS_PSILCFG select TI_K3_PSIL - default n help Support for UDMA used in K3 devices. endif diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig index 2d1836a80e..d5e4a02098 100644 --- a/drivers/fastboot/Kconfig +++ b/drivers/fastboot/Kconfig @@ -74,7 +74,6 @@ config FASTBOOT_FLASH config FASTBOOT_UUU_SUPPORT bool "Enable FASTBOOT i.MX UUU special command" - default n help The fastboot protocol includes "UCmd" and "ACmd" command. Be aware that you provide full access to any U-Boot command, diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 4a89c1a62b..ab9adbdd6e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -39,7 +39,6 @@ config TPL_DM_GPIO config GPIO_HOG bool "Enable GPIO hog support" depends on DM_GPIO - default n help Enable gpio hog support The GPIO chip may contain GPIO hog definitions. GPIO hogging @@ -91,13 +90,11 @@ config CORTINA_GPIO config DWAPB_GPIO bool "DWAPB GPIO driver" depends on DM && DM_GPIO - default n help Support for the Designware APB GPIO driver. config AT91_GPIO bool "AT91 PIO GPIO driver" - default n help Say yes here to select AT91 PIO GPIO driver. AT91 PIO controller manages up to 32 fully programmable input/output @@ -110,7 +107,6 @@ config AT91_GPIO config ATMEL_PIO4 bool "ATMEL PIO4 driver" depends on DM_GPIO - default n help Say yes here to support the Atmel PIO4 driver. The PIO4 is new version of Atmel PIO controller, which manages @@ -150,13 +146,11 @@ config INTEL_ICH6_GPIO config IMX_RGPIO2P bool "i.MX7ULP RGPIO2P driver" depends on DM - default n help This driver supports i.MX7ULP Rapid GPIO2P controller. config IPROC_GPIO bool "Broadcom iProc GPIO driver(without pinconf)" - default n help The Broadcom iProc based SoCs- Cygnus, NS2, NS3, NSP and Stingray, use the same GPIO Controller IP hence this driver could be used @@ -168,14 +162,12 @@ config IPROC_GPIO config HSDK_CREG_GPIO bool "HSDK CREG GPIO griver" depends on DM_GPIO - default n help This driver supports CREG GPIOs on Synopsys HSDK SOC. config LPC32XX_GPIO bool "LPC32XX GPIO driver" depends on DM - default n help Support for the LPC32XX GPIO driver. @@ -203,7 +195,6 @@ config MSCC_SGPIO config MSM_GPIO bool "Qualcomm GPIO driver" depends on DM_GPIO - default n help Support GPIO controllers on Qualcomm Snapdragon family of SoCs. This controller have single bank (default name "soc"), every @@ -345,7 +336,6 @@ config GPIO_UNIPHIER config VYBRID_GPIO bool "Vybrid GPIO driver" depends on DM - default n help Say yes here to support Vybrid vf610 GPIOs. diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 5d27f503bf..57cac4483f 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -193,7 +193,6 @@ config SYS_I2C_CADENCE config SYS_I2C_CA tristate "Cortina-Access I2C Controller" depends on DM_I2C && CORTINA_PLATFORM - default n help Add support for the Cortina Access I2C host controller. Say yes here to select Cortina-Access I2C Host Controller. @@ -206,7 +205,6 @@ config SYS_I2C_DAVINCI config SYS_I2C_DW bool "Designware I2C Controller" - default n help Say yes here to select the Designware I2C Host Controller. This controller is used in various SoCs, e.g. the ST SPEAr, Altera diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 1569e8c44a..e0927ce1c9 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -123,7 +123,6 @@ config MMC_IO_VOLTAGE config SPL_MMC_IO_VOLTAGE bool "Support IO voltage configuration in SPL" - default n help IO voltage configuration allows selecting the voltage level of the IO lines (not the level of main supply). This is required for UHS @@ -193,7 +192,6 @@ config MMC_VERBOSE config MMC_TRACE bool "MMC debugging" - default n help This is an option for use by developer. Enable MMC core debugging. @@ -221,7 +219,6 @@ config MMC_DW_CORTINA depends on DM_MMC depends on MMC_DW depends on BLK - default n help This selects support for Cortina SoC specific extensions to the Synopsys DesignWare Memory Card Interface driver. Select this option @@ -770,7 +767,6 @@ config FTSDC010 config FTSDC010_SDIO bool "Support ftsdc010 sdio" - default n depends on FTSDC010 help This can enable ftsdc010 sdio function. @@ -805,7 +801,6 @@ config FSL_ESDHC_SUPPORT_ADMA2 config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND bool "enable eSDHC workaround for 3.3v IO reliability issue" depends on FSL_ESDHC && DM_MMC - default n help When eSDHC operates at 3.3v, damage can accumulate in an internal level shifter at a higher than expected rate. The faster the interface diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index a901ce5511..f7b1334ddb 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -31,12 +31,10 @@ if NAND_ATMEL config ATMEL_NAND_HWECC bool "Atmel Hardware ECC" - default n config ATMEL_NAND_HW_PMECC bool "Atmel Programmable Multibit ECC (PMECC)" select ATMEL_NAND_HWECC - default n help The Programmable Multibit ECC (PMECC) controller is a programmable binary BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. @@ -59,7 +57,6 @@ config SPL_GENERATE_ATMEL_PMECC_HEADER bool "Atmel PMECC Header Generation" select ATMEL_NAND_HWECC select ATMEL_NAND_HW_PMECC - default n help Generate Programmable Multibit ECC (PMECC) header for SPL image. diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index b2291f7290..ddeef37ffc 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -99,7 +99,6 @@ config SPI_FLASH_SMART_HWCAPS config SPI_FLASH_SOFT_RESET bool "Software Reset support for SPI NOR flashes" - default n help Enable support for xSPI Software Reset. It will be used to switch from Octal DTR mode to legacy mode on shutdown and boot (if enabled). @@ -107,7 +106,6 @@ config SPI_FLASH_SOFT_RESET config SPI_FLASH_SOFT_RESET_ON_BOOT bool "Perform a Software Reset on boot on flashes that boot in stateful mode" depends on SPI_FLASH_SOFT_RESET - default n help Perform a Software Reset on boot to allow detecting flashes that are handed to us in Octal DTR mode. Do not enable this config on flashes diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index a78fd51ba7..67a3cf1d7a 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -68,7 +68,6 @@ config MTD_UBI_BEB_LIMIT config MTD_UBI_FASTMAP bool "UBI Fastmap (Experimental feature)" - default n help Important: this feature is experimental so far and the on-flash format for fastmap may change in the next kernel versions diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 32f2708dc3..0b906db5c1 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -558,7 +558,6 @@ endif #DM_ETH config SMC911X_32_BIT bool "Enable SMC911X 32-bit interface" - default n help Define this if data bus is 32 bits. If your processor use a narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit @@ -713,7 +712,6 @@ config FEC1_PHY config PHY_NORXERR bool "PHY_NORXERR" depends on ETHER_ON_FEC1 - default n help The PHY does not have a RXERR line (RMII only). (so program the FEC to ignore it). @@ -738,7 +736,6 @@ config FEC2_PHY config FEC2_PHY_NORXERR bool "PHY_NORXERR" depends on ETHER_ON_FEC2 - default n help The PHY does not have a RXERR line (RMII only). (so program the FEC to ignore it). diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 64d5ddf238..68ee7d7a2d 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -71,7 +71,6 @@ menuconfig PHY_AQUANTIA config PHY_AQUANTIA_UPLOAD_FW bool "Aquantia firmware loading support" - default n depends on PHY_AQUANTIA help Aquantia PHYs use firmware which can be either loaded automatically @@ -102,7 +101,6 @@ config PHY_CORTINA config SYS_CORTINA_NO_FW_UPLOAD bool "Cortina firmware loading support" - default n depends on PHY_CORTINA help Cortina phy has provision to store phy firmware in attached dedicated @@ -250,7 +248,6 @@ config RTL8211X_PHY_FORCE_MASTER config RTL8211F_PHY_FORCE_EEE_RXC_ON bool "Ethernet PHY RTL8211F: do not stop receiving the xMII clock during LPI" depends on PHY_REALTEK - default n help The IEEE 802.3az-2010 (EEE) standard provides a protocol to coordinate transitions to/from a lower power consumption level (Low Power Idle diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 2ef4d46797..97d0de5b11 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -29,7 +29,6 @@ config DM_PCI_COMPAT config PCI_AARDVARK bool "Enable Aardvark PCIe driver" - default n depends on DM_PCI depends on DM_GPIO depends on ARMADA_3700 @@ -48,7 +47,6 @@ config PCI_PNP config PCI_REGION_MULTI_ENTRY bool "Enable Multiple entries of region type MEMORY in ranges for PCI" depends on PCI || DM_PCI - default n help Enable PCI memory regions to be of multiple entry. Multiple entry here refers to allow more than one count of address ranges for MEMORY @@ -59,7 +57,6 @@ config PCI_MAP_SYSTEM_MEMORY bool "Map local system memory from a virtual base address" depends on PCI || DM_PCI depends on MIPS - default n help Say Y if base address of system memory is being used as a virtual address instead of a physical address (e.g. on MIPS). The PCI core will then remap @@ -71,7 +68,6 @@ config PCI_MAP_SYSTEM_MEMORY config PCI_SRIOV bool "Enable Single Root I/O Virtualization support for PCI" depends on PCI || DM_PCI - default n help Say Y here if you want to enable PCI Single Root I/O Virtualization capability support. This helps to enumerate Virtual Function devices @@ -81,7 +77,6 @@ config PCI_SRIOV config PCI_ARID bool "Enable Alternate Routing-ID support for PCI" depends on PCI || DM_PCI - default n help Say Y here if you want to enable Alternate Routing-ID capability support on PCI devices. This helps to skip some devices in BDF @@ -89,7 +84,6 @@ config PCI_ARID config PCIE_ECAM_GENERIC bool "Generic ECAM-based PCI host controller support" - default n depends on DM_PCI help Say Y here if you want to enable support for generic ECAM-based @@ -97,7 +91,6 @@ config PCIE_ECAM_GENERIC config PCIE_ECAM_SYNQUACER bool "SynQuacer ECAM-based PCI host controller support" - default n depends on DM_PCI select PCI_INIT_R select PCI_REGION_MULTI_ENTRY @@ -209,7 +202,6 @@ config PCI_XILINX config PCIE_LAYERSCAPE bool - default n config PCIE_LAYERSCAPE_RC bool "Layerscape PCIe Root Complex mode support" diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig index 4240028403..b5f69c0a96 100644 --- a/drivers/phy/marvell/Kconfig +++ b/drivers/phy/marvell/Kconfig @@ -1,6 +1,5 @@ config MVEBU_COMPHY_SUPPORT bool "ComPhy SerDes driver" - default n help Choose this option to add support for Comphy driver. diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index c5fbf1f832..26257a72bc 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -248,7 +248,6 @@ endchoice config AXP_ALDO3_INRUSH_QUIRK bool "axp pmic (a)ldo3 inrush quirk" depends on AXP209_POWER - default n ---help--- The reference design denotes a value of 4.7 uF for the output capacitor of LDO3. Some boards have too high capacitance causing an inrush current @@ -357,7 +356,6 @@ config AXP_FLDO3_VOLT config AXP_SW_ON bool "axp pmic sw on" depends on AXP809_POWER || AXP818_POWER - default n ---help--- Enable to turn on axp pmic sw. diff --git a/drivers/ram/aspeed/Kconfig b/drivers/ram/aspeed/Kconfig index 049b9dc249..576d5af868 100644 --- a/drivers/ram/aspeed/Kconfig +++ b/drivers/ram/aspeed/Kconfig @@ -3,7 +3,6 @@ if RAM || SPL_RAM config ASPEED_DDR4_DUALX8 bool "Enable Dual X8 DDR4 die" depends on DM && OF_CONTROL && ARCH_ASPEED - default n help Say Y if dual X8 DDR4 die is used on the board. The aspeed ddr sdram controller needs to know if the memory chip mounted on the board is dual @@ -42,14 +41,12 @@ endchoice config ASPEED_BYPASS_SELFTEST bool "bypass self test during DRAM initialization" - default n help Say Y here to bypass DRAM self test to speed up the boot time config ASPEED_ECC bool "aspeed SDRAM error correcting code" depends on DM && OF_CONTROL && ARCH_ASPEED - default n help enable SDRAM ECC function diff --git a/drivers/ram/octeon/Kconfig b/drivers/ram/octeon/Kconfig index eb5a1208ed..f19957293f 100644 --- a/drivers/ram/octeon/Kconfig +++ b/drivers/ram/octeon/Kconfig @@ -1,7 +1,6 @@ config RAM_OCTEON bool "Ram drivers for Octeon SoCs" depends on RAM && ARCH_OCTEON - default n help This enables support for RAM drivers for Octeon SoCs. @@ -9,7 +8,6 @@ if RAM_OCTEON config RAM_OCTEON_DDR4 bool "Octeon III DDR4 RAM support" - default n help This enables support for DDR4 RAM suppoort for Octeon III. This does not include support for Octeon CN70XX. diff --git a/drivers/ram/stm32mp1/Kconfig b/drivers/ram/stm32mp1/Kconfig index 2fd8c7b7e3..1aaf064c30 100644 --- a/drivers/ram/stm32mp1/Kconfig +++ b/drivers/ram/stm32mp1/Kconfig @@ -23,7 +23,6 @@ config STM32MP1_DDR_INTERACTIVE config STM32MP1_DDR_INTERACTIVE_FORCE bool "STM32MP1 DDR driver : force interactive mode" depends on STM32MP1_DDR_INTERACTIVE - default n help force interactive mode in STM32MP1 DDR controller driver skip the polling of character 'd' in console diff --git a/drivers/reboot-mode/Kconfig b/drivers/reboot-mode/Kconfig index ac67bfcef6..63ea18cdf0 100644 --- a/drivers/reboot-mode/Kconfig +++ b/drivers/reboot-mode/Kconfig @@ -9,7 +9,6 @@ menu "Reboot Mode Support" config DM_REBOOT_MODE bool "Enable reboot mode using Driver Model" depends on DM - default n help Enable support for reboot mode control. This will allow users to adjust the boot process based on reboot mode parameter @@ -18,7 +17,6 @@ config DM_REBOOT_MODE config DM_REBOOT_MODE_GPIO bool "Use GPIOs as reboot mode backend" depends on DM_REBOOT_MODE - default n help Use GPIOs to control the reboot mode. This will allow users to boot a device in a specific mode by using a GPIO that can be controlled @@ -27,7 +25,6 @@ config DM_REBOOT_MODE_GPIO config DM_REBOOT_MODE_RTC bool "Use RTC as reboot mode backend" depends on DM_REBOOT_MODE - default n help Use RTC non volatile memory to control the reboot mode. This will allow users to boot a device in a specific mode by using a register(s) that can be controlled diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig index 94915d45b3..b1c5ab93d1 100644 --- a/drivers/rng/Kconfig +++ b/drivers/rng/Kconfig @@ -34,14 +34,12 @@ config RNG_MSM config RNG_STM32MP1 bool "Enable random number generator for STM32MP1" depends on ARCH_STM32MP - default n help Enable STM32MP1 rng driver. config RNG_ROCKCHIP bool "Enable random number generator for rockchip crypto rng" depends on ARCH_ROCKCHIP && DM_RNG - default n help Enable random number generator for rockchip.This driver is support rng module of crypto v1 and crypto v2. @@ -49,7 +47,6 @@ config RNG_ROCKCHIP config RNG_IPROC200 bool "Broadcom iProc RNG200 random number generator" depends on DM_RNG - default n help Enable random number generator for RPI4. endif diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 93348c0929..c972408826 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -137,7 +137,6 @@ config SERIAL_SEARCH_ALL config SERIAL_PROBE_ALL bool "Probe all available serial devices" depends on DM_SERIAL - default n help The serial subsystem only probes for a single serial device, but does not probe for other remaining serial devices. @@ -621,7 +620,6 @@ config FSL_LPUART config MVEBU_A3700_UART bool "UART support for Armada 3700" - default n help Choose this option to add support for UART driver on the Marvell Armada 3700 SoC. The base address is configured via DT. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 427b360af1..8957bb56a6 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -146,7 +146,6 @@ config USB_EHCI_MARVELL config USB_EHCI_MX5 bool "Support for i.MX5 on-chip EHCI USB controller" depends on ARCH_MX5 - default n help Enables support for the on-chip EHCI controller on i.MX5 SoCs. @@ -195,7 +194,6 @@ config USB_EHCI_MSM depends on DM_USB select USB_ULPI_VIEWPORT select MSM8916_USB_PHY - default n ---help--- Enables support for the on-chip EHCI controller on Qualcomm Snapdragon SoCs. @@ -222,13 +220,11 @@ config USB_EHCI_GENERIC bool "Support for generic EHCI USB controller" depends on DM_USB default ARCH_SUNXI - default n ---help--- Enables support for generic EHCI controller. config USB_EHCI_FSL bool "Support for FSL on-chip EHCI USB controller" - default n select CONFIG_EHCI_HCD_INIT_AFTER_RESET ---help--- Enables support for the on-chip EHCI controller on FSL chips. diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index a9a7c2675e..6dd830cb73 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -34,7 +34,6 @@ config USB_MUSB_TI bool "Enable TI OTG USB controller" depends on AM33XX select USB_MUSB_DSPS - default n help Say y here to enable support for the dual role high speed USB controller based on the Mentor Graphics @@ -53,7 +52,6 @@ config USB_MUSB_DSPS config USB_MUSB_MT85XX bool "Enable Mediatek MT85XX DRC USB controller" depends on ARCH_MEDIATEK - default n help Say y to enable Mediatek MT85XX USB DRC controller support if it is available on your Mediatek MUSB IP based platform. diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8b940d70eb..b1f8a9c1e6 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -259,7 +259,6 @@ config VIDEO_EFI config VIDEO_VESA bool "Enable VESA video driver support" - default n help Turn on this option to enable a very simple driver which uses vesa to discover the video mode and then provides a frame buffer for use @@ -406,7 +405,6 @@ config FRAMEBUFFER_VESA_MODE config VIDEO_LCD_ANX9804 bool "ANX9804 bridge chip" - default n ---help--- Support for the ANX9804 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fy into a DP @@ -416,7 +414,6 @@ config VIDEO_LCD_ORISETECH_OTM8009A bool "OTM8009A DSI LCD panel support" depends on DM_VIDEO select VIDEO_MIPI_DSI - default n help Say Y here if you want to enable support for Orise Technology otm8009a 480x800 dsi 2dl panel. @@ -425,14 +422,12 @@ config VIDEO_LCD_RAYDIUM_RM68200 bool "RM68200 DSI LCD panel support" depends on DM_VIDEO select VIDEO_MIPI_DSI - default n help Say Y here if you want to enable support for Raydium RM68200 720x1280 DSI video mode panel. config VIDEO_LCD_SSD2828 bool "SSD2828 bridge chip" - default n ---help--- Support for the SSD2828 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fly into MIPI DSI @@ -463,14 +458,12 @@ config VIDEO_LCD_TDO_TL070WSH30 bool "TDO TL070WSH30 DSI LCD panel support" depends on DM_VIDEO select VIDEO_MIPI_DSI - default n help Say Y here if you want to enable support for TDO TL070WSH30 1024x600 DSI video mode panel. config VIDEO_LCD_HITACHI_TX18D42VM bool "Hitachi tx18d42vm LVDS LCD panel support" - default n ---help--- Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is @@ -523,7 +516,6 @@ source "drivers/video/meson/Kconfig" config VIDEO_MVEBU bool "Armada XP LCD controller" - default n ---help--- Support for the LCD controller integrated in the Marvell Armada XP SoC. @@ -536,14 +528,12 @@ config VIDEO_OMAP3 config I2C_EDID bool "Enable EDID library" - default n help This enables library for accessing EDID data from an LCD panel. config DISPLAY bool "Enable Display support" depends on DM - default n select I2C_EDID help This supports drivers that provide a display, such as eDP (Embedded @@ -554,7 +544,6 @@ config DISPLAY config NXP_TDA19988 bool "Enable NXP TDA19988 support" depends on DISPLAY - default n help This enables support for the NXP TDA19988 HDMI encoder. This encoder will convert RGB data streams into HDMI-encoded signals. @@ -868,7 +857,6 @@ config VIDEO_MCDE_SIMPLE config OSD bool "Enable OSD support" depends on DM - default n help This supports drivers that provide a OSD (on-screen display), which is a (usually text-oriented) graphics buffer to show information on @@ -1008,7 +996,6 @@ config BMP_32BPP config VIDEO_VCXK bool "Enable VCXK video controller driver support" - default n help This enables VCXK driver which can be used with VC2K, VC4K and VC8K devices on various boards from BuS Elektronik GmbH. diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index 031bab25ae..a2c51083b1 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -6,7 +6,6 @@ menu "1-Wire support" config W1 bool "Enable 1-wire controllers support" - default no depends on DM help Support for the Dallas 1-Wire bus. @@ -15,14 +14,12 @@ if W1 config W1_GPIO bool "Enable 1-wire GPIO bitbanging" - default no depends on DM_GPIO help Emulate a 1-wire bus using a GPIO. config W1_MXC bool "Enable 1-wire controller on i.MX processors" - default no depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5 help Support the one wire controller found in some members of the NXP diff --git a/env/Kconfig b/env/Kconfig index 760e62521c..f75f2b1353 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -685,7 +685,6 @@ config ENV_FDT_PATH config ENV_APPEND bool "Always append the environment with new data" - default n help If defined, the environment hash table is only ever appended with new data, but the existing hash table can never be dropped and reloaded @@ -694,7 +693,6 @@ config ENV_APPEND config ENV_WRITEABLE_LIST bool "Permit write access only to listed variables" - default n help If defined, only environment variables which explicitly set the 'w' writeable flag can be written and modified at runtime. No variables @@ -702,7 +700,6 @@ config ENV_WRITEABLE_LIST config ENV_ACCESS_IGNORE_FORCE bool "Block forced environment operations" - default n help If defined, don't allow the -f switch to env set override variable access flags. diff --git a/lib/Kconfig b/lib/Kconfig index c535147aea..47f82f7ba4 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -92,7 +92,6 @@ config TPL_SPRINTF config SSCANF bool - default n config STRTO bool @@ -348,7 +347,6 @@ menu "Android Verified Boot" config LIBAVB bool "Android Verified Boot 2.0 support" depends on ANDROID_BOOT_IMAGE - default n help This enables support of Android Verified Boot 2.0 which can be used to assure the end user of the integrity of the software running on a @@ -773,7 +771,6 @@ endmenu config PHANDLE_CHECK_SEQ bool "Enable phandle check while getting sequence number" - default n help When there are multiple device tree nodes with same name, enable this config option to distinguish them using diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index dacc3b5881..0e5231b925 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -38,7 +38,6 @@ config CMD_BOOTEFI_BOOTMGR config EFI_SETUP_EARLY bool - default n choice prompt "Store for non-volatile UEFI variables" @@ -112,7 +111,6 @@ config EFI_SET_TIME bool "SetTime() runtime service" depends on EFI_GET_TIME default y if ARCH_QEMU || SANDBOX - default n help Provide the SetTime() runtime service at boottime. This service can be used by an EFI application to adjust the real time clock. @@ -122,7 +120,6 @@ config EFI_HAVE_CAPSULE_SUPPORT config EFI_RUNTIME_UPDATE_CAPSULE bool "UpdateCapsule() runtime service" - default n select EFI_HAVE_CAPSULE_SUPPORT help Select this option if you want to use UpdateCapsule and @@ -131,7 +128,6 @@ config EFI_RUNTIME_UPDATE_CAPSULE config EFI_CAPSULE_ON_DISK bool "Enable capsule-on-disk support" select EFI_HAVE_CAPSULE_SUPPORT - default n help Select this option if you want to use capsule-on-disk feature, that is, capsules can be fetched and executed from files @@ -141,7 +137,6 @@ config EFI_CAPSULE_ON_DISK config EFI_IGNORE_OSINDICATIONS bool "Ignore OsIndications for CapsuleUpdate on-disk" depends on EFI_CAPSULE_ON_DISK - default n help There are boards where U-Boot does not support SetVariable at runtime. Select this option if you want to use the capsule-on-disk feature @@ -151,7 +146,6 @@ config EFI_IGNORE_OSINDICATIONS config EFI_CAPSULE_ON_DISK_EARLY bool "Initiate capsule-on-disk at U-Boot boottime" depends on EFI_CAPSULE_ON_DISK - default n select EFI_SETUP_EARLY help Normally, without this option enabled, capsules will be @@ -162,7 +156,6 @@ config EFI_CAPSULE_ON_DISK_EARLY config EFI_CAPSULE_FIRMWARE bool - default n config EFI_CAPSULE_FIRMWARE_MANAGEMENT bool "Capsule: Firmware Management Protocol" @@ -209,7 +202,6 @@ config EFI_CAPSULE_AUTHENTICATE select PKCS7_VERIFY select IMAGE_SIGN_INFO select EFI_SIGNATURE_SUPPORT - default n help Select this option if you want to enable capsule authentication @@ -277,7 +269,6 @@ endif config EFI_LOADER_BOUNCE_BUFFER bool "EFI Applications use bounce buffers for DMA operations" depends on ARM64 - default n help Some hardware does not support DMA to full 64bit addresses. For this hardware we can create a bounce buffer so that payloads don't have to @@ -364,7 +355,6 @@ config EFI_SECURE_BOOT select PKCS7_MESSAGE_PARSER select PKCS7_VERIFY select EFI_SIGNATURE_SUPPORT - default n help Select this option to enable EFI secure boot support. Once SecureBoot mode is enforced, any EFI binary can run only if diff --git a/lib/optee/Kconfig b/lib/optee/Kconfig index c398f9b953..3290b6656d 100644 --- a/lib/optee/Kconfig +++ b/lib/optee/Kconfig @@ -34,7 +34,6 @@ config BOOTM_OPTEE bool "Support OPTEE bootm command" select BOOTM_LINUX depends on OPTEE - default n help Select this command to enable chain-loading of a Linux kernel via an OPTEE firmware. diff --git a/net/Kconfig b/net/Kconfig index ba0ca813ce..7a2d145018 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -40,7 +40,6 @@ config NETCONSOLE config IP_DEFRAG bool "Support IP datagram reassembly" - default n help Selecting this will enable IP datagram reassembly according to the algorithm in RFC815.