From: Ye Li Date: Tue, 27 Aug 2019 06:25:34 +0000 (+0000) Subject: imx8m: Configure trustzone region 0 for non-secure access X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b3cf0a8f03d162e030cde1131751d060853e16fc;p=u-boot.git imx8m: Configure trustzone region 0 for non-secure access Set trustzone region 0 to allow both non-secure and secure access when trust zone is enabled. We found USB controller fails to access DDR if the default region 0 is secure access only. Signed-off-by: Ye Li Signed-off-by: Peng Fan --- diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 261f586fc0..a33ca35653 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -57,6 +57,12 @@ void enable_tzc380(void) setbits_le32(&gpr->gpr[10], GPR_TZASC_EN_LOCK); if (IS_ENABLED(CONFIG_IMX8MM)) setbits_le32(&gpr->gpr[10], BIT(1)); + /* + * set Region 0 attribute to allow secure and non-secure + * read/write permission. Found some masters like usb dwc3 + * controllers can't work with secure memory. + */ + writel(0xf0000000, TZASC_BASE_ADDR + 0x108); } void set_wdog_reset(struct wdog_regs *wdog)