From: Vinitha Pillai-B57223 Date: Thu, 23 Mar 2017 08:18:16 +0000 (+0530) Subject: armv8: SECURE_BOOT: Enable chain of trust on LS1046A platform X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b3635f57d94c366bd94f9f8010024cd6a2d6b272;p=u-boot.git armv8: SECURE_BOOT: Enable chain of trust on LS1046A platform Define bootscript and its header addresses for QSPI target. Also define PPA header address to enable PPA validation. Signed-off-by: Vinitha Pillai Signed-off-by: Sumit Garg --- diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index d587ed3c93..f19c1be85a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -176,6 +176,7 @@ config SYS_LS_PPA_ESBC_ADDR hex "hdr address of PPA firmware loading from" depends on FSL_LS_PPA && CHAIN_OF_TRUST default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A + default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 help If the PPA header firmware locate at XIP flash, such as NOR or diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index b5b08aae23..1f22afd9e6 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -199,7 +199,7 @@ #define CONFIG_SYS_FSL_IFC_BE #define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SNVS_LE +#define CONFIG_SYS_FSL_SEC_MON_BE #define CONFIG_SYS_FSL_SFP_BE #define CONFIG_SYS_FSL_SRK_LE #define CONFIG_KEY_REVOCATION diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 4c36f9dc5e..cbf92fbb7b 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -46,9 +46,10 @@ #endif -#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) -/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit - * Similiarly for LS2080 +#if defined(CONFIG_FSL_LAYERSCAPE) +/* + * For fsl layerscape based platforms, ESBC image Address in Header + * is 64 bit. */ #define CONFIG_ESBC_ADDR_64BIT #endif @@ -90,12 +91,21 @@ #define CONFIG_BS_ADDR_DEVICE 0x00000940 #define CONFIG_BS_HDR_SIZE 0x00000010 #define CONFIG_BS_SIZE 0x00000008 +#elif defined(CONFIG_QSPI_BOOT) +#ifdef CONFIG_ARCH_LS1046A +#define CONFIG_BS_HDR_ADDR_DEVICE 0x40780000 +#define CONFIG_BS_ADDR_DEVICE 0x40800000 #else +#error "Platform not supported" +#endif +#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_SIZE 0x00001000 +#else /* Default NOR Boot */ #define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000 #define CONFIG_BS_ADDR_DEVICE 0x60060000 #define CONFIG_BS_HDR_SIZE 0x00002000 #define CONFIG_BS_SIZE 0x00001000 -#endif /* #ifdef CONFIG_SD_BOOT */ +#endif #define CONFIG_BS_HDR_ADDR_RAM 0x81000000 #define CONFIG_BS_ADDR_RAM 0x81020000 #endif