From: Simon Glass Date: Sat, 7 Dec 2019 04:42:29 +0000 (-0700) Subject: x86: Add an option to control the position of U-Boot X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b31129528e7dbbfb67a93116b40fbb1b1d4d724b;p=u-boot.git x86: Add an option to control the position of U-Boot The existing work-around for positioning U-Boot in the ROM when it actually runs from RAM still exists and there is not obvious way to change this. Add a proper Kconfig option to handle this case. This also adds a new bool property to indicate whether CONFIG_SYS_TEXT_BASE exists. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/Kconfig b/Kconfig index 92fc4fc135..46a31f45b9 100644 --- a/Kconfig +++ b/Kconfig @@ -545,9 +545,14 @@ config SYS_EXTRA_OPTIONS configuration to Kconfig. Since this option will be removed sometime, new boards should not use this option. -config SYS_TEXT_BASE +config HAVE_SYS_TEXT_BASE + bool depends on !NIOS2 && !XTENSA depends on !EFI_APP + default y + +config SYS_TEXT_BASE + depends on HAVE_SYS_TEXT_BASE default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3 default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I @@ -556,8 +561,6 @@ config SYS_TEXT_BASE help The address in memory that U-Boot will be running from, initially. - - config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI || MPC83xx int "CPU clock frequency" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 64f167306b..9d7ff3c07a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -899,4 +899,9 @@ config CACHE_QOS_SIZE_PER_BIT depends on INTEL_CAR_CQOS default 0x20000 # 128 KB +config X86_OFFSET_U_BOOT + hex "Offset of U-Boot in ROM image" + depends on HAVE_SYS_TEXT_BASE + default SYS_TEXT_BASE + endmenu diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi index 14e3c13072..d84c64880a 100644 --- a/arch/x86/dts/u-boot.dtsi +++ b/arch/x86/dts/u-boot.dtsi @@ -50,7 +50,7 @@ u-boot-spl-dtb { }; u-boot { - offset = ; + offset = ; }; #elif defined(CONFIG_SPL) u-boot-spl-with-ucode-ptr { @@ -60,23 +60,11 @@ type = "u-boot-dtb-with-ucode"; }; u-boot { - /* - * TODO(sjg@chromium.org): - * Normally we use CONFIG_SYS_TEXT_BASE as the flash offset. But - * for boards with textbase in SDRAM we cannot do this. Just use - * an assumed-valid value (1MB before the end of flash) here so - * that we can actually build an image for coreboot, etc. - * We need a better solution, perhaps a separate Kconfig. - */ -#if CONFIG_SYS_TEXT_BASE == 0x1110000 - offset = <0xfff00000>; -#else - offset = ; -#endif + offset = ; }; #else u-boot-with-ucode-ptr { - offset = ; + offset = ; }; #endif #ifdef CONFIG_HAVE_MICROCODE diff --git a/configs/chromebook_samus_tpl_defconfig b/configs/chromebook_samus_tpl_defconfig index 5ef2ecb1c4..74b7e9a207 100644 --- a/configs/chromebook_samus_tpl_defconfig +++ b/configs/chromebook_samus_tpl_defconfig @@ -16,6 +16,7 @@ CONFIG_HAVE_REFCODE=y CONFIG_SMP=y CONFIG_HAVE_VGA_BIOS=y CONFIG_SPL_TEXT_BASE=0xffe70000 +CONFIG_X86_OFFSET_U_BOOT=0xfff00000 CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index b88a4c57fe..a37ec4d0d6 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -13,6 +13,7 @@ CONFIG_SMP=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_MP_TABLE=y CONFIG_GENERATE_ACPI_TABLE=y +CONFIG_X86_OFFSET_U_BOOT=0xfff00000 CONFIG_SPL_TEXT_BASE=0xfffd0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BUILD_ROM=y