From: Ondrej Jirman <megous@megous.com>
Date: Wed, 13 Feb 2019 17:51:05 +0000 (+0100)
Subject: power: axp818: Fix typo in axp_set_dldo
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b24db49cc2be5c0287f8ee5257b84f98323048c4;p=u-boot.git

power: axp818: Fix typo in axp_set_dldo

Fix typo in axp_set_dldo() so that it correctly uses AXP818_DLDO1_CTRL
register to configure the voltage instead of setting AXP818_ELDO1_CTRL
register which is obviously incorrect.

Signed-off-by: Ondřej Jirman <megous@megous.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
---

diff --git a/drivers/power/axp818.c b/drivers/power/axp818.c
index c737da1180..834919ddd4 100644
--- a/drivers/power/axp818.c
+++ b/drivers/power/axp818.c
@@ -161,7 +161,7 @@ int axp_set_dldo(int dldo_num, unsigned int mvolt)
 	cfg = axp818_mvolt_to_cfg(mvolt, 700, 3300, 100);
 	if (dldo_num == 2 && mvolt > 3300)
 		cfg += 1 + axp818_mvolt_to_cfg(mvolt, 3400, 4200, 200);
-	ret = pmic_bus_write(AXP818_ELDO1_CTRL + (dldo_num - 1), cfg);
+	ret = pmic_bus_write(AXP818_DLDO1_CTRL + (dldo_num - 1), cfg);
 	if (ret)
 		return ret;