From: Bin Meng <bmeng.cn@gmail.com>
Date: Wed, 4 Feb 2015 08:26:09 +0000 (+0800)
Subject: x86: quark: Initialize non-standard BARs
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b162257d4f175b59ebedd9c2db930d29317ffe16;p=u-boot.git

x86: quark: Initialize non-standard BARs

Quark SoC has some non-standard BARs (excluding PCI standard BARs)
which need be initialized with suggested values. This includes GPIO,
WDT, RCBA, PCIe ECAM and some ACPI register block base addresses.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index 47ba15253f..cf596e45e1 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -9,6 +9,46 @@
 #include <asm/pci.h>
 #include <asm/post.h>
 #include <asm/processor.h>
+#include <asm/arch/device.h>
+#include <asm/arch/msg_port.h>
+#include <asm/arch/quark.h>
+
+static void quark_setup_bars(void)
+{
+	/* GPIO - D31:F0:R44h */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA,
+			       CONFIG_GPIO_BASE | IO_BAR_EN);
+
+	/* ACPI PM1 Block - D31:F0:R48h */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK,
+			       CONFIG_ACPI_PM1_BASE | IO_BAR_EN);
+
+	/* GPE0 - D31:F0:R4Ch */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK,
+			       CONFIG_ACPI_GPE0_BASE | IO_BAR_EN);
+
+	/* WDT - D31:F0:R84h */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA,
+			       CONFIG_WDT_BASE | IO_BAR_EN);
+
+	/* RCBA - D31:F0:RF0h */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA,
+			       CONFIG_RCBA_BASE | MEM_BAR_EN);
+
+	/* ACPI P Block - Msg Port 04:R70h */
+	msg_port_write(MSG_PORT_RMU, PBLK_BA,
+		       CONFIG_ACPI_PBLK_BASE | IO_BAR_EN);
+
+	/* SPI DMA - Msg Port 04:R7Ah */
+	msg_port_write(MSG_PORT_RMU, SPI_DMA_BA,
+		       CONFIG_SPI_DMA_BASE | IO_BAR_EN);
+
+	/* PCIe ECAM */
+	msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL,
+		       CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
+	msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG,
+		       CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
+}
 
 int arch_cpu_init(void)
 {
@@ -28,6 +68,12 @@ int arch_cpu_init(void)
 	if (ret)
 		return ret;
 
+	/*
+	 * Quark SoC has some non-standard BARs (excluding PCI standard BARs)
+	 * which need be initialized with suggested values
+	 */
+	quark_setup_bars();
+
 	return 0;
 }
 
diff --git a/arch/x86/include/asm/arch-quark/quark.h b/arch/x86/include/asm/arch-quark/quark.h
index ebbcf7755d..ceb583e3f0 100644
--- a/arch/x86/include/asm/arch-quark/quark.h
+++ b/arch/x86/include/asm/arch-quark/quark.h
@@ -14,9 +14,29 @@
 #define MSG_PORT_MEM_MGR	0x05
 #define MSG_PORT_SOC_UNIT	0x31
 
+/* Port 0x00: Memory Arbiter Message Port Registers */
+
+/* Enhanced Configuration Space */
+#define AEC_CTRL		0x00
+
+/* Port 0x03: Host Bridge Message Port Registers */
+
 /* Host Memory I/O Boundary */
 #define HM_BOUND		0x08
 
+/* Extended Configuration Space */
+#define HEC_REG			0x09
+
+/* Port 0x04: Remote Management Unit Message Port Registers */
+
+/* ACPI PBLK Base Address Register */
+#define PBLK_BA			0x70
+
+/* SPI DMA Base Address Register */
+#define SPI_DMA_BA		0x7a
+
+/* Port 0x05: Memory Manager Message Port Registers */
+
 /* eSRAM Block Page Control */
 #define ESRAM_BLK_CTRL		0x82
 #define ESRAM_BLOCK_MODE	0x10000000
@@ -37,4 +57,16 @@
 /* 64KiB of RMU binary in flash */
 #define RMU_BINARY_SIZE		0x10000
 
+/* Legacy Bridge PCI Configuration Registers */
+#define LB_GBA			0x44
+#define LB_PM1BLK		0x48
+#define LB_GPE0BLK		0x4c
+#define LB_ACTL			0x58
+#define LB_PABCDRC		0x60
+#define LB_PEFGHRC		0x64
+#define LB_WDTBA		0x84
+#define LB_BCE			0xd4
+#define LB_BC			0xd8
+#define LB_RCBA			0xf0
+
 #endif /* _QUARK_H_ */