From: Lunsheng Wang Date: Fri, 29 Jul 2005 15:20:29 +0000 (-0500) Subject: * Patch by Ron Alder, 11 July 2005 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b0e32949239c7870d409ca687a2dfc1261a3d838;p=u-boot.git * Patch by Ron Alder, 11 July 2005 Add Xianghua Xiao and Lunsheng Wang's support for the GDA MPC8540 EVAL board. --- diff --git a/CHANGELOG b/CHANGELOG index acd36fa1b9..e827895776 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,6 +1,10 @@ ====================================================================== Changes for U-Boot 1.1.3: ====================================================================== +* Patch by Ron Alder, 11 July 2005 + Add Xianghua Xiao and Lunsheng Wang's support for the + GDA MPC8540 EVAL board. + * Patch by Eran Liberty Add support for the Freescale MPC8349ADS board. diff --git a/MAKEALL b/MAKEALL index c96f52c478..2a70320bd7 100755 --- a/MAKEALL +++ b/MAKEALL @@ -121,9 +121,9 @@ LIST_83xx=" \ LIST_85xx=" \ - MPC8540ADS MPC8541CDS MPC8548CDS MPC8555CDS \ - MPC8560ADS PM854 sbc8540 sbc8560 \ - stxgp3 TQM8540 \ + MPC8540ADS MPC8540EVAL MPC8541CDS MPC8548CDS \ + MPC8555CDS MPC8560ADS PM854 sbc8540 \ + sbc8560 stxgp3 TQM8540 \ " ######################################################################### diff --git a/Makefile b/Makefile index 56478a21bd..90a6228399 100644 --- a/Makefile +++ b/Makefile @@ -1197,6 +1197,26 @@ MPC8349ADS_config: unconfig MPC8540ADS_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads +MPC8540EVAL_config \ +MPC8540EVAL_33_config \ +MPC8540EVAL_66_config \ +MPC8540EVAL_33_slave_config \ +MPC8540EVAL_66_slave_config: unconfig + @echo "" >include/config.h ; \ + if [ "$(findstring _33_,$@)" ] ; then \ + echo -n "... 33 MHz PCI" ; \ + else \ + echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \ + echo -n "... 66 MHz PCI" ; \ + fi ; \ + if [ "$(findstring _slave_,$@)" ] ; then \ + echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \ + echo " slave" ; \ + else \ + echo " host" ; \ + fi + @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval + MPC8560ADS_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads diff --git a/README b/README index c52ccbd9db..b20ede47d3 100644 --- a/README +++ b/README @@ -287,17 +287,17 @@ The following options need to be configured: CONFIG_EBONY CONFIG_MOUSSE CONFIG_SXNI855T CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM823L CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM8260 - CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM850L - CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM855L - CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TQM860L - CONFIG_ETX094 CONFIG_NETPHONE CONFIG_TTTech - CONFIG_EVB64260 CONFIG_NETTA CONFIG_UTX8245 - CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37 - CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC - CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG - CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT405 - CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900 - CONFIG_FPS860L CONFIG_ZUMA + CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM850L + CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM855L + CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TQM860L + CONFIG_ETX094 CONFIG_MVS1 CONFIG_TTTech + CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_UTX8245 + CONFIG_FADS823 CONFIG_NETTA CONFIG_V37 + CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMC + CONFIG_FADS860T CONFIG_NX823 CONFIG_W7OLMG + CONFIG_FLAGADM CONFIG_OCRTC CONFIG_WALNUT405 + CONFIG_FPS850L CONFIG_ORSG CONFIG_ZPC1900 + CONFIG_FPS860L CONFIG_OXC CONFIG_ZUMA ARM based boards: ----------------- @@ -2186,14 +2186,14 @@ configurations; the following names are supported: DUET_ADS_config MBX_config sbc8560_66_config EBONY_config MPC8260ADS_config SM850_config ELPT860_config MPC8540ADS_config SPD823TS_config - ESTEEM192E_config MPC8560ADS_config stxgp3_config - ETX094_config NETVIA_config SXNI855T_config - FADS823_config omap1510inn_config TQM823L_config - FADS850SAR_config omap1610h2_config TQM850L_config - FADS860T_config omap1610inn_config TQM855L_config - FPS850L_config omap5912osk_config TQM860L_config - omap2420h4_config WALNUT405_config - Yukon8220_config + ESTEEM192E_config MPC8540EVAL_config stxgp3_config + ETX094_config MPC8560ADS_config SXNI855T_config + FADS823_config NETVIA_config TQM823L_config + FADS850SAR_config omap1510inn_config TQM850L_config + FADS860T_config omap1610h2_config TQM855L_config + FPS850L_config omap1610inn_config TQM860L_config + omap5912osk_config WALNUT405_config + omap2420h4_config Yukon8220_config ZPC1900_config Note: for some board special configuration names may exist; check if diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile new file mode 100644 index 0000000000..6f1995e082 --- /dev/null +++ b/board/mpc8540eval/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := $(BOARD).o flash.o +#OBJS := $(BOARD).o flash.o $(BOARD)_slave.o +SOBJS := init.o +#SOBJS := + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/mpc8540eval/config.mk b/board/mpc8540eval/config.mk new file mode 100644 index 0000000000..68271bd700 --- /dev/null +++ b/board/mpc8540eval/config.mk @@ -0,0 +1,34 @@ +# Modified by Xianghua Xiao, X.Xiao@motorola.com +# (C) Copyright 2002,Motorola Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# gda8540 board +# default CCARBAR is at 0xff700000 +# assume U-Boot is less than 0.5MB +# +#TEXT_BASE = 0x1000000 +TEXT_BASE = 0xfff80000 + + +PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8540=1 +PLATFORM_CPPFLAGS += -DCONFIG_E500=1 diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c new file mode 100644 index 0000000000..7300a041a2 --- /dev/null +++ b/board/mpc8540eval/flash.c @@ -0,0 +1,892 @@ +/* + * (C) Copyright 2003 Motorola Inc. + * Xianghua Xiao,(X.Xiao@motorola.com) + * + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com + * Add support the Sharp chips on the mpc8260ads. + * I started with board/ip860/flash.c and made changes I found in + * the MTD project by David Schleef. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#if !defined(CFG_NO_FLASH) + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +#if defined(CFG_ENV_IS_IN_FLASH) +# ifndef CFG_ENV_ADDR +# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +# endif +# ifndef CFG_ENV_SIZE +# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +# endif +# ifndef CFG_ENV_SECT_SIZE +# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE +# endif +#endif + +/* + * The variable should be in the flash info structure. Since it + * is only used in this board specific file it is declared here. + * In the future I think an endian flag should be part of the + * flash_info_t structure. (Ron Alder) + */ +static ulong big_endian = 0; + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (vu_long *addr, flash_info_t *info); +static int write_block (flash_info_t *info, uchar * src, ulong dest, ulong cnt); +static int write_short (flash_info_t *info, ulong dest, ushort data); +static int write_word (flash_info_t *info, ulong dest, ulong data); +static int clear_block_lock_bit(flash_info_t *info, vu_long * addr); +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + unsigned long size; + int i; + + /* Init: enable write, + * or we cannot even write flash commands + */ + for (i=0; i= CFG_FLASH_BASE + /* monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE+monitor_flash_len-1, + &flash_info[0]); +#endif + +#ifdef CFG_ENV_IS_IN_FLASH + /* ENV protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1, + &flash_info[0]); +#endif +#endif + return (size); +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: printf ("Intel "); break; + case FLASH_MAN_SHARP: printf ("Sharp "); break; + default: printf ("Unknown Vendor "); break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n"); + break; + case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n"); + break; + case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n"); + break; + case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n"); + break; + case FLASH_28F640J3A: printf ("28F640J3A (64 Mbit, 64 x 128K)\n"); + break; + default: printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i=0; isector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); +} + + /* only deal with 16 bit and 32 bit port width, 16bit chip */ +static ulong flash_get_size (vu_long *addr, flash_info_t *info) +{ + short i; + ulong value,va,vb,vc,vd; + ulong base = (ulong)addr; + ulong sector_offset; + +#ifdef DEBUG + printf("Check flash at 0x%08x\n",(uint)addr); +#endif + /* Write "Intelligent Identifier" command: read Manufacturer ID */ + *addr = 0x90909090; + udelay(20); + asm("sync"); + +#ifndef CFG_FLASH_CFI + printf("Not define CFG_FLASH_CFI\n"); + return (0); +#else + value = addr[0]; + va=(value & 0xFF000000)>>24; + vb=(value & 0x00FF0000)>>16; + vc=(value & 0x0000FF00)>>8; + vd=(value & 0x000000FF); + if ((va==0) && (vb==0)) { + printf("cannot identify Flash\n"); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + else if ((va==0) && (vb!=0)) { + big_endian = 1; + info->chipwidth = FLASH_CFI_BY16; + if(vb == vd) info->portwidth = FLASH_CFI_32BIT; + else info->portwidth = FLASH_CFI_16BIT; + } + else if ((va!=0) && (vb==0)) { + big_endian = 0; + info->chipwidth = FLASH_CFI_BY16; + if(va == vc) info->portwidth = FLASH_CFI_32BIT; + else info->portwidth = FLASH_CFI_16BIT; + } + else if ((va!=0) && (vb!=0)) { + big_endian = 1; /* no meaning for 8bit chip */ + info->chipwidth = FLASH_CFI_BY8; + if(va == vb) info->portwidth = FLASH_CFI_16BIT; + else info->portwidth = FLASH_CFI_8BIT; + } +#ifdef DEBUG + switch (info->portwidth) { + case FLASH_CFI_8BIT: + printf("port width is 8 bit.\n"); + break; + case FLASH_CFI_16BIT: + printf("port width is 16 bit, "); + break; + case FLASH_CFI_32BIT: + printf("port width is 32 bit, "); + break; + } + switch (info->chipwidth) { + case FLASH_CFI_BY16: + printf("chip width is 16 bit, "); + switch (big_endian) { + case 0: + printf("Little Endian.\n"); + break; + case 1: + printf("Big Endian.\n"); + break; + } + break; + } +#endif +#endif /*#ifdef CFG_FLASH_CFI*/ + + if (big_endian==0) value = (addr[0] & 0xFF000000) >>8; + else value = (addr[0] & 0x00FF0000); +#ifdef DEBUG + printf("manufacturer=0x%x\n",(uint)(value>>16)); +#endif + switch (value) { + case MT_MANUFACT & 0xFFFF0000: /* SHARP, MT or => Intel */ + case INTEL_ALT_MANU & 0xFFFF0000: + info->flash_id = FLASH_MAN_INTEL; + break; + default: + printf("unknown manufacturer: %x\n", (unsigned int)value); + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + + if (info->portwidth==FLASH_CFI_16BIT) { + switch (big_endian) { + case 0: + value = (addr[0] & 0x0000FF00)>>8; + break; + case 1: + value = (addr[0] & 0x000000FF); + break; + } + } + else if (info->portwidth == FLASH_CFI_32BIT) { + switch (big_endian) { + case 0: + value = (addr[1] & 0x0000FF00)>>8; + break; + case 1: + value = (addr[1] & 0x000000FF); + break; + } + } + +#ifdef DEBUG + printf("deviceID=0x%x\n",(uint)value); +#endif + switch (value) { + case (INTEL_ID_28F016S & 0x0000FFFF): + info->flash_id += FLASH_28F016SV; + info->sector_count = 32; + sector_offset = 0x10000; + break; /* => 2 MB */ + + case (INTEL_ID_28F160S3 & 0x0000FFFF): + info->flash_id += FLASH_28F160S3; + info->sector_count = 32; + sector_offset = 0x10000; + break; /* => 2 MB */ + + case (INTEL_ID_28F320S3 & 0x0000FFFF): + info->flash_id += FLASH_28F320S3; + info->sector_count = 64; + sector_offset = 0x10000; + break; /* => 4 MB */ + + case (INTEL_ID_28F640J3A & 0x0000FFFF): + info->flash_id += FLASH_28F640J3A; + info->sector_count = 64; + sector_offset = 0x20000; + break; /* => 8 MB */ + + case SHARP_ID_28F016SCL & 0x0000FFFF: + case SHARP_ID_28F016SCZ & 0x0000FFFF: + info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT; + info->sector_count = 32; + sector_offset = 0x10000; + break; /* => 2 MB */ + + + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + + } + + sector_offset = sector_offset * (info->portwidth / info->chipwidth); + info->size = info->sector_count * sector_offset; + + /* set up sector start address table */ + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base; + base += sector_offset; + /* don't know how to check sector protection */ + info->protect[i] = 0; + } + + /* + * Prevent writes to uninitialized FLASH. + */ + if (info->flash_id != FLASH_UNKNOWN) { + addr = (vu_long *)info->start[0]; + *addr = 0xFFFFFF; /* reset bank to read array mode */ + asm("sync"); + } + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong start, now, last, ready, erase_err_status; + + if (big_endian == 1) { + ready = 0x0080; + erase_err_status = 0x00a0; + } + else { + ready = 0x8000; + erase_err_status = 0xa000; + } + if ((info->portwidth / info->chipwidth)==2) { + ready += (ready <<16); + erase_err_status += (erase_err_status <<16); + } + +#ifdef DEBUG + printf ("\nReady flag is 0x%lx\nErase error flag is 0x%lx", ready, erase_err_status); +#endif + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) + && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + +#ifdef DEBUG + printf("\nFlash Erase:\n"); +#endif + /* Make Sure Block Lock Bit is not set. */ + if(clear_block_lock_bit(info, (vu_long *)(info->start[s_first]))){ + return 1; + } + + /* Start erase on unprotected sectors */ +#if defined(DEBUG) + printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last); +#endif + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + vu_short *addr16 = (vu_short *)(info->start[sect]); + vu_long *addr = (vu_long *)(info->start[sect]); + printf("."); + switch (info->portwidth) { + case FLASH_CFI_16BIT: + asm("sync"); + last = start = get_timer (0); + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + /* Reset Array */ + *addr16 = 0xffff; + asm("sync"); + /* Clear Status Register */ + *addr16 = 0x5050; + asm("sync"); + /* Single Block Erase Command */ + *addr16 = 0x2020; + asm("sync"); + /* Confirm */ + *addr16 = 0xD0D0; + asm("sync"); + if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) { + /* Resume Command, as per errata update */ + *addr16 = 0xD0D0; + asm("sync"); + } + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + /* wait at least 80us - let's wait 1 ms */ + *addr16 = 0x7070; + udelay (1000); + while ((*addr16 & ready) != ready) { + if((*addr16 & erase_err_status)== erase_err_status){ + printf("Error in Block Erase - Lock Bit may be set!\n"); + printf("Status Register = 0x%X\n", (uint)*addr16); + *addr16 = 0xFFFF; /* reset bank */ + asm("sync"); + return 1; + } + if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr16 = 0xFFFF; /* reset bank */ + asm("sync"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + /* reset to read mode */ + *addr16 = 0xFFFF; + asm("sync"); + break; + case FLASH_CFI_32BIT: + asm("sync"); + last = start = get_timer (0); + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + /* Reset Array */ + *addr = 0xffffffff; + asm("sync"); + /* Clear Status Register */ + *addr = 0x50505050; + asm("sync"); + /* Single Block Erase Command */ + *addr = 0x20202020; + asm("sync"); + /* Confirm */ + *addr = 0xD0D0D0D0; + asm("sync"); + if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) { + /* Resume Command, as per errata update */ + *addr = 0xD0D0D0D0; + asm("sync"); + } + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + /* wait at least 80us - let's wait 1 ms */ + *addr = 0x70707070; + udelay (1000); + while ((*addr & ready) != ready) { + if((*addr & erase_err_status)==erase_err_status){ + printf("Error in Block Erase - Lock Bit may be set!\n"); + printf("Status Register = 0x%X\n", (uint)*addr); + *addr = 0xFFFFFFFF; /* reset bank */ + asm("sync"); + return 1; + } + if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = 0xFFFFFFFF; /* reset bank */ + asm("sync"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + /* reset to read mode */ + *addr = 0xFFFFFFFF; + asm("sync"); + break; + } /* end switch */ + } /* end if */ + } /* end for */ + + printf ("flash erase done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +#define FLASH_BLOCK_SIZE 32 + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data, count, temp; +/* ulong temp[FLASH_BLOCK_SIZE/4];*/ + int i, l, rc; + + count = cnt; + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + cp = wp; + /* handle unaligned block bytes , flash block size = 16bytes */ + wp = (cp+FLASH_BLOCK_SIZE-1) & ~(FLASH_BLOCK_SIZE-1); + if ((wp-cp)>=cnt) { + if ((rc = write_block(info,src,cp,wp-cp)) !=0) + return (rc); + src += wp-cp; + cnt -= wp-cp; + } + /* handle aligned block bytes */ + temp = 0; + printf("\n"); + while ( cnt >= FLASH_BLOCK_SIZE) { + if ((rc = write_block(info,src,cp,FLASH_BLOCK_SIZE)) !=0) { + return (rc); + } + src += FLASH_BLOCK_SIZE; + cp += FLASH_BLOCK_SIZE; + cnt -= FLASH_BLOCK_SIZE; + if (((count-cnt)>>10)>temp) { + temp=(count-cnt)>>10; + printf("\r%d KB",temp); + } + } + printf("\n"); + wp = cp; + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + return (write_word(info, wp, data)); +} +#undef FLASH_BLOCK_SIZE + +/*----------------------------------------------------------------------- + * Write block to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * -1 Error + */ +static int write_block(flash_info_t *info, uchar * src, ulong dest, ulong cnt) +{ + vu_short *baddr, *addr = (vu_short *)dest; + ushort data; + ulong start, now, xsr,csr, ready; + int flag; + + if (cnt==0) return 0; + else if(cnt != (cnt& ~1)) return -1; + + /* Check if Flash is (sufficiently) erased */ + data = * src; + data = (data<<8) | *(src+1); + if ((*addr & data) != data) { + return (2); + } + if (big_endian == 1) { + ready = 0x0080; + } + else { + ready = 0x8000; + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + do { + /* Write Command */ + *addr = 0xe8e8; + asm("sync"); + xsr = *addr; + asm("sync"); + } while (!(xsr & ready)); /*wait until read */ + /*write count=BLOCK SIZE -1 */ + data=(cnt>>1)-1; + data=(data<<8)|data; + *addr = data; /* word mode, cnt/2 */ + asm("sync"); + baddr = addr; + while(cnt) { + data = * src++; + data = (data<<8) | *src++; + asm("sync"); + *baddr = data; + asm("sync"); + ++baddr; + cnt = cnt -2; + } + *addr = 0xd0d0; /* confirm write */ + start = get_timer(0); + asm("sync"); + if (flag) + enable_interrupts(); + /* data polling for D7 */ + flag = 0; + while (((csr = *addr) & ready) != ready) { + if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) { + flag = 1; + break; + } + } + if (csr & 0x4040) { + printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr); + flag = 1; + } + /* Clear Status Registers Command */ + *addr = 0x5050; + asm("sync"); + /* Reset to read array mode */ + *addr = 0xFFFF; + asm("sync"); + return (flag); +} + + +/*----------------------------------------------------------------------- + * Write a short word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_short (flash_info_t *info, ulong dest, ushort data) +{ + vu_short *addr = (vu_short *)dest; + ulong start, now, csr, ready; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Write Command */ + *addr = 0x1010; + start = get_timer (0); + asm("sync"); + /* Write Data */ + *addr = data; + asm("sync"); + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + if (big_endian == 1) { + ready = 0x0080; + } + else { + ready = 0x8000; + } + /* data polling for D7 */ + flag = 0; + while (((csr = *addr) & ready) != ready) { + if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) { + flag = 1; + break; + } + } + if (csr & 0x4040) { + printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr); + flag = 1; + } + /* Clear Status Registers Command */ + *addr = 0x5050; + asm("sync"); + /* Reset to read array mode */ + *addr = 0xFFFF; + asm("sync"); + return (flag); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t *info, ulong dest, ulong data) +{ + vu_long *addr = (vu_long *)dest; + ulong start, csr, ready; + int flag=0; + + switch (info->portwidth) { + case FLASH_CFI_32BIT: + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + if (big_endian == 1) { + ready = 0x0080; + } + else { + ready = 0x8000; + } + if ((info->portwidth / info->chipwidth)==2) { + ready += (ready <<16); + } + else { + ready = ready << 16; + } + /* Write Command */ + *addr = 0x10101010; + asm("sync"); + /* Write Data */ + *addr = data; + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + /* data polling for D7 */ + start = get_timer (0); + flag = 0; + while (((csr = *addr) & ready) != ready) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + flag = 1; + break; + } + } + if (csr & 0x40404040) { + printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr); + flag = 1; + } + /* Clear Status Registers Command */ + *addr = 0x50505050; + asm("sync"); + /* Reset to read array mode */ + *addr = 0xFFFFFFFF; + asm("sync"); + break; + case FLASH_CFI_16BIT: + flag = write_short (info, dest, (unsigned short) (data>>16)); + if (flag == 0) + flag = write_short (info, dest+2, (unsigned short) (data)); + break; + } + return (flag); +} + +/*----------------------------------------------------------------------- + * Clear Block Lock Bit, returns: + * 0 - OK + * 1 - Timeout + */ + +static int clear_block_lock_bit(flash_info_t * info, vu_long * addr) +{ + ulong start, now, ready; + + /* Reset Array */ + *addr = 0xffffffff; + asm("sync"); + /* Clear Status Register */ + *addr = 0x50505050; + asm("sync"); + + *addr = 0x60606060; + asm("sync"); + *addr = 0xd0d0d0d0; + asm("sync"); + + + if (big_endian == 1) { + ready = 0x0080; + } + else { + ready = 0x8000; + } + if ((info->portwidth / info->chipwidth)==2) { + ready += (ready <<16); + } + else { + ready = ready << 16; + } +#ifdef DEBUG + printf ("%s: Ready flag is 0x%8lx\n", __FUNCTION__, ready); +#endif + *addr = 0x70707070; /* read status */ + start = get_timer (0); + while((*addr & ready) != ready){ + if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout on clearing Block Lock Bit\n"); + *addr = 0xFFFFFFFF; /* reset bank */ + asm("sync"); + return 1; + } + } + return 0; +} + +#endif /* !CFG_NO_FLASH */ diff --git a/board/mpc8540eval/init.S b/board/mpc8540eval/init.S new file mode 100644 index 0000000000..8c2ca65a91 --- /dev/null +++ b/board/mpc8540eval/init.S @@ -0,0 +1,178 @@ +/* +* Copyright (C) 2002,2003, Motorola Inc. +* Xianghua Xiao +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include + +#define entry_start \ + mflr r1 ; \ + bl 0f ; + +#define entry_end \ +0: mflr r0 ; \ + mtlr r1 ; \ + blr ; + +/* TLB1 entries configuration: */ + + .section .bootpg, "ax" + .globl tlb1_entry +tlb1_entry: + entry_start + + .long 0x0a /* the following data table uses a few of 16 TLB entries */ + + .long TLB1_MAS0(1,1,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + #if defined(CFG_FLASH_PORT_WIDTH_16) + .long TLB1_MAS0(1,2,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M) + .long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,3,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M) + .long TLB1_MAS2((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1) + #else + .long TLB1_MAS0(1,2,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16M) + .long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,3,0) + .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(0,0,0,0,0,0,0,0,0) + .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1) + #endif + + #if !defined(CONFIG_SPD_EEPROM) + .long TLB1_MAS0(1,4,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M) + .long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0) + .long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,5,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M) + .long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0) + .long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + #else + .long TLB1_MAS0(1,4,0) + .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(0,0,0,0,0,0,0,0,0) + .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,5,0) + .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(0,0,0,0,0,0,0,0,0) + .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1) + #endif + + .long TLB1_MAS0(1,6,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M) + #if defined(CONFIG_RAM_AS_FLASH) + .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0) + #else + .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0) + #endif + .long TLB1_MAS3(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,7,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K) + #ifdef CONFIG_L2_INIT_RAM + .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0) + #else + .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0) + #endif + .long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,8,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M) + .long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + .long TLB1_MAS0(1,9,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K) + .long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + + #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) + .long TLB1_MAS0(1,15,0) + .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0) + .long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1) + #else + .long TLB1_MAS0(1,15,0) + .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M) + .long TLB1_MAS2(0,0,0,0,0,0,0,0,0) + .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1) + #endif + entry_end + +/* LAW(Local Access Window) configuration: + * 0000_0000-0800_0000: DDR(128M) -or- larger + * f000_0000-f3ff_ffff: PCI(256M) + * f400_0000-f7ff_ffff: RapidIO(128M) + * f800_0000-ffff_ffff: localbus(128M) + * f800_0000-fbff_ffff: LBC SDRAM(64M) + * fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M) + * fdf0_0000-fdff_ffff: CCSRBAR(1M) + * fe00_0000-ffff_ffff: Flash(32M) + * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access + * Window. + * Note: If flash is 8M at default position(last 8M),no LAW needed. + */ + +#if !defined(CONFIG_SPD_EEPROM) +#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff) +#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) +#else +#define LAWBAR0 0 +#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) +#endif + +#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff) +#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M)) + +#if !defined(CONFIG_RAM_AS_FLASH) +#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) +#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) +#else +#define LAWBAR2 0 +#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) +#endif + + .section .bootpg, "ax" + .globl law_entry +law_entry: + entry_start + .long 0x03 + .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2 + entry_end diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c new file mode 100644 index 0000000000..c90dbc762c --- /dev/null +++ b/board/mpc8540eval/mpc8540eval.c @@ -0,0 +1,271 @@ +/* + * (C) Copyright 2002,2003, Motorola Inc. + * Xianghua Xiao, (X.Xiao@motorola.com) + * + * (C) Copyright 2002 Scott McNutt + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +extern long int spd_sdram (void); + +#include +#include +#include +#include + + + +long int fixed_sdram (void); + +/* MPC8540ADS Board Status & Control Registers */ +#if 0 +typedef struct bscr_ { + unsigned long bcsr0; + unsigned long bcsr1; + unsigned long bcsr2; + unsigned long bcsr3; + unsigned long bcsr4; + unsigned long bcsr5; + unsigned long bcsr6; + unsigned long bcsr7; +} bcsr_t; +#endif + + + +int board_pre_init (void) +{ +#if defined(CONFIG_PCI) + volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile ccsr_pcix_t *pci = &immr->im_pcix; + + pci->peer &= 0xffffffdf; /* disable master abort */ +#endif + return 0; +} + +int checkboard (void) +{ + sys_info_t sysinfo; + + get_sys_info (&sysinfo); + + printf ("Board: Freescale MPC8540EVAL Board\n"); + printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000); + printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000); + if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \ + || (CFG_LBC_LCRR & 0x0f) == 8) { + printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f)); + } else { + printf("\tLBC: unknown\n"); + } + printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); + return (0); +} + +long int initdram (int board_type) +{ + long dram_size = 0; + extern long spd_sdram (void); + volatile immap_t *immap = (immap_t *)CFG_IMMR; +#if !defined(CONFIG_RAM_AS_FLASH) + volatile ccsr_lbc_t *lbc= &immap->im_lbc; + sys_info_t sysinfo; + uint temp_lbcdll = 0; +#endif +#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) + volatile ccsr_gur_t *gur= &immap->im_gur; +#endif + +#if defined(CONFIG_DDR_DLL) + uint temp_ddrdll = 0; + + /* Work around to stabilize DDR DLL */ + temp_ddrdll = gur->ddrdllcr; + gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; + asm("sync;isync;msync"); +#endif + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram (); +#else + dram_size = fixed_sdram (); +#endif + +#if defined(CFG_RAMBOOT) + return dram_size; +#endif + +#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */ + get_sys_info(&sysinfo); + /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */ + if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) { + lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000; + } else { + lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff; + udelay(200); + temp_lbcdll = gur->lbcdllcr; + gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; + asm("sync;isync;msync"); + } + lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */ + lbc->br2 = CFG_BR2_PRELIM; + lbc->lbcr = CFG_LBC_LBCR; + lbc->lsdmr = CFG_LBC_LSDMR_1; + asm("sync"); + * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_2; + asm("sync"); + * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_3; + asm("sync"); + * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_5; + asm("sync"); + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + lbc->mrtpr = CFG_LBC_MRTPR; + asm("sync"); +#endif + +#if defined(CONFIG_DDR_ECC) + { + /* Initialize all of memory for ECC, then + * enable errors */ + uint *p = 0; + uint i = 0; + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_ddr_t *ddr= &immap->im_ddr; + dma_init(); + for (*p = 0; p < (uint *)(8 * 1024); p++) { + if (((unsigned int)p & 0x1f) == 0) { dcbz(p); } + *p = (unsigned int)0xdeadbeef; + if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); } + } + + /* 8K */ + dma_xfer((uint *)0x2000,0x2000,(uint *)0); + /* 16K */ + dma_xfer((uint *)0x4000,0x4000,(uint *)0); + /* 32K */ + dma_xfer((uint *)0x8000,0x8000,(uint *)0); + /* 64K */ + dma_xfer((uint *)0x10000,0x10000,(uint *)0); + /* 128k */ + dma_xfer((uint *)0x20000,0x20000,(uint *)0); + /* 256k */ + dma_xfer((uint *)0x40000,0x40000,(uint *)0); + /* 512k */ + dma_xfer((uint *)0x80000,0x80000,(uint *)0); + /* 1M */ + dma_xfer((uint *)0x100000,0x100000,(uint *)0); + /* 2M */ + dma_xfer((uint *)0x200000,0x200000,(uint *)0); + /* 4M */ + dma_xfer((uint *)0x400000,0x400000,(uint *)0); + + for (i = 1; i < dram_size / 0x800000; i++) { + dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0); + } + + /* Enable errors for ECC */ + ddr->err_disable = 0x00000000; + asm("sync;isync;msync"); + } +#endif + + return dram_size; +} + + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) CFG_MEMTEST_START; + uint *pend = (uint *) CFG_MEMTEST_END; + uint *p; + + printf("SDRAM test phase 1:\n"); + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("SDRAM test phase 2:\n"); + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("SDRAM test passed.\n"); + return 0; +} +#endif + + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +long int fixed_sdram (void) +{ + #ifndef CFG_RAMBOOT + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_ddr_t *ddr= &immap->im_ddr; + + ddr->cs0_bnds = CFG_DDR_CS0_BNDS; + ddr->cs0_config = CFG_DDR_CS0_CONFIG; + ddr->timing_cfg_1 = CFG_DDR_TIMING_1; + ddr->timing_cfg_2 = CFG_DDR_TIMING_2; + ddr->sdram_mode = CFG_DDR_MODE; + ddr->sdram_interval = CFG_DDR_INTERVAL; + #if defined (CONFIG_DDR_ECC) + ddr->err_disable = 0x0000000D; + ddr->err_sbe = 0x00ff0000; + #endif + asm("sync;isync;msync"); + udelay(500); + #if defined (CONFIG_DDR_ECC) + /* Enable ECC checking */ + ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); + #else + ddr->sdram_cfg = CFG_DDR_CONTROL; + #endif + asm("sync; isync; msync"); + udelay(500); + #endif + return (CFG_SDRAM_SIZE * 1024 * 1024); +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ diff --git a/board/mpc8540eval/u-boot.lds b/board/mpc8540eval/u-boot.lds new file mode 100644 index 0000000000..2479af1516 --- /dev/null +++ b/board/mpc8540eval/u-boot.lds @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2002,2003, Motorola,Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Assumes that the size of u-boot is less than 512K and the + * start address is aligned on a 512K block. + * Boot page and reset vector is put at that end of the 512K block. */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc85xx/start.o (.text) + board/mpc8540eval/init.o (.text) + cpu/mpc85xx/traps.o (.text) + cpu/mpc85xx/interrupts.o (.text) + cpu/mpc85xx/cpu_init.o (.text) + cpu/mpc85xx/cpu.o (.text) + cpu/mpc85xx/speed.o (.text) + cpu/mpc85xx/pci.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); + + . = (. & 0xFFF80000) + 0x0007F000; + .bootpg : + { + cpu/mpc85xx/start.o (.bootpg) + board/mpc8540eval/init.o (.bootpg) + } = 0xffff + + . = (. & 0xFFF80000) + 0x0007FFFC; + .resetvec : + { + *(.resetvec) + } = 0xffff + +} diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index dd8189931a..fc869a3389 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -155,11 +155,13 @@ _start_e500: mtspr MCSR,r0 mtspr DEAR,r0 - mtspr DBCR0,r0 + /* not needed and conflicts with some debuggers */ + /* mtspr DBCR0,r0 */ mtspr DBCR1,r0 mtspr DBCR2,r0 - mtspr IAC1,r0 - mtspr IAC2,r0 + /* not needed and conflicts with some debuggers */ + /* mtspr IAC1,r0 */ + /* mtspr IAC2,r0 */ mtspr DAC1,r0 mtspr DAC2,r0 diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h new file mode 100644 index 0000000000..34cbe46c50 --- /dev/null +++ b/include/configs/MPC8540EVAL.h @@ -0,0 +1,342 @@ +/* + * (C) Copyright 2002,2003 Motorola,Inc. + * Modified by Lunsheng Wang, lunsheng@sohu.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* mpc8540eval board configuration file */ +/* please refer to doc/README.mpc85xxads for more info */ +/* make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +/* High Level Configuration Options */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ +#define CONFIG_MPC8540 1 /* MPC8540 specific */ +#define CONFIG_MPC8540EVAL 1 /* MPC8540EVAL board specific */ + +#undef CONFIG_PCI /* pci ethernet support */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_DLL /* possible DLL fix needed */ + +/* Using Localbus SDRAM to emulate flash before we can program the flash, + * normally you only need a flash-boot image(u-boot.bin),if unsure undef this. + * Not availabe for EVAL board + */ +#undef CONFIG_RAM_AS_FLASH + +/* sysclk for MPC8540EVAL */ +#if defined(CONFIG_SYSCLK_66M) +#define CONFIG_SYS_CLK_FREQ 66000000 /* the oscillator on board is 66Mhz */ + /* can also get 66M clock from external PCI */ +#else + #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ +#endif + +/* below can be toggled for performance analysis. otherwise use default */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#undef CONFIG_BTB /* toggle branch predition */ +#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00400000 + +#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) +#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both." +#endif + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_SIZE 256 /* DDR is now 256MB */ + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ +#else +#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#endif +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 0MB */ + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */ +#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */ +#else /* Boot from real Flash */ +#define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ +#define CFG_BR0_PRELIM 0xff801001 /* port size 16bit */ +#endif + +#define CFG_OR0_PRELIM 0xff806f67 /* 8MB Flash */ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 64 /* sectors per device */ +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms)*/ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/ +#define CFG_FLASH_CFI 1 + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ + +/* Here some DDR setting should be added */ + + +#undef CONFIG_CLOCKS_IN_MHZ + +/* local bus definitions */ +#define CFG_BR2_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ +#define CFG_OR2_PRELIM 0xfc006901 +#define CFG_LBC_LCRR 0x00030004 /* local bus freq divider*/ +#define CFG_LBC_LBCR 0x00000000 +#define CFG_LBC_LSRT 0x20000000 +#define CFG_LBC_MRTPR 0x20000000 +#define CFG_LBC_LSDMR_1 0x2861b723 +#define CFG_LBC_LSDMR_2 0x0861b723 +#define CFG_LBC_LSDMR_3 0x0861b723 +#define CFG_LBC_LSDMR_4 0x1861b723 +#define CFG_LBC_LSDMR_5 0x4061b723 + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */ +#else +#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */ +#endif +#define CFG_OR4_PRELIM 0xffffe1f1 +#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000) + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) +#define CONFIG_BAUDRATE 115200 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ + +/* General PCI */ +#define CFG_PCI_MEM_BASE 0x80000000 +#define CFG_PCI_MEM_PHYS 0x80000000 +#define CFG_PCI_MEM_SIZE 0x20000000 +#define CFG_PCI_IO_BASE 0xe2000000 + +#if defined(CONFIG_PCI) +#define CONFIG_NET_MULTI +#undef CONFIG_EEPRO100 +#define CONFIG_TULIP +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + #if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/ + #endif +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +#define CFG_PCI_SUBSYS_DEVICEID 0x0008 +#elif defined(CONFIG_TSEC_ENET) +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_MPC85XX_TSEC1 1 +#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" +#define CONFIG_MPC85XX_TSEC2 1 +#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_MPC85XX_FEC 1 +#define CONFIG_MPC85XX_FEC_NAME "FEC" +#define TSEC1_PHY_ADDR 7 +#define TSEC2_PHY_ADDR 4 +#define FEC_PHY_ADDR 2 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define FEC_PHYIDX 0 +/* Options are: TSEC[0-1], FEC */ +#define CONFIG_ETHPRIME "TSEC0" + +#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */ +#define INTEL_LXT971_PHY 1 /* on EVAL board. It is Davicom 9161 on ADS. */ +#endif + +#undef DEBUG + +/* Environment */ +#ifndef CFG_RAMBOOT + #if defined(CONFIG_RAM_AS_FLASH) + #define CFG_ENV_IS_NOWHERE + #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000) + #define CFG_ENV_SIZE 0x2000 + #else + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #endif + #define CFG_ENV_SIZE 0x2000 +#else +/* #define CFG_NO_FLASH 1 */ /* Flash is not usable now */ +#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) +#define CFG_ENV_SIZE 0x2000 +#endif + +/*#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.1.10:/tftproot/192.168.1.11 ip=192.168.1.11:192.168.1.10:192.168.1.0:255.255.255.0:mpc8540ads-003:eth0:off console=ttyS0,115200"*/ +#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200" +#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" +#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_PCI | CFG_CMD_I2C ) & \ + ~(CFG_CMD_ENV | CFG_CMD_LOADS )) + #else + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) & \ + ~(CFG_CMD_ENV | \ + CFG_CMD_LOADS )) + #endif +#else + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_PING | CFG_CMD_I2C ) + #else + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) + #endif +#endif +#include + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "MPC8540EVAL=> "/* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/*****************************/ +/* Environment Configuration */ +/*****************************/ +/* The mac addresses for all ethernet interface */ +/* NOTE: change below for your network setting!!! */ +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 00:01:af:07:9b:8a +#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b +#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +#endif + +#define CONFIG_ROOTPATH /nfsroot +#define CONFIG_BOOTFILE your.uImage + +#define CONFIG_SERVERIP 192.168.101.1 +#define CONFIG_IPADDR 192.168.101.11 +#define CONFIG_GATEWAYIP 192.168.101.0 +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_HOSTNAME MPC8540EVAL + +#endif /* __CONFIG_H */