From: Andrew Davis <afd@ti.com>
Date: Fri, 7 Oct 2022 17:12:29 +0000 (-0500)
Subject: arm: mach-k3: security: Use dma-mapping for cache ops
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b0931d1bd165b53f5946c1d8c42a8e225b8e5cf0;p=u-boot.git

arm: mach-k3: security: Use dma-mapping for cache ops

This matches how this would be done in Linux and these functions
do the alignment for us which makes the code look cleaner.

Signed-off-by: Andrew Davis <afd@ti.com>
---

diff --git a/arch/arm/mach-k3/security.c b/arch/arm/mach-k3/security.c
index d8d41ec515..092588f4b5 100644
--- a/arch/arm/mach-k3/security.c
+++ b/arch/arm/mach-k3/security.c
@@ -18,6 +18,7 @@
 #include <mach/spl.h>
 #include <spl.h>
 #include <asm/arch/sys_proto.h>
+#include <linux/dma-mapping.h>
 
 #include "common.h"
 
@@ -47,7 +48,6 @@ void ti_secure_image_post_process(void **p_image, size_t *p_size)
 	u32 image_size;
 	int ret;
 
-	image_addr = (uintptr_t)*p_image;
 	image_size = *p_size;
 
 	if (!image_size)
@@ -80,13 +80,12 @@ void ti_secure_image_post_process(void **p_image, size_t *p_size)
 		return;
 	}
 
+	/* Clean out image so it can be seen by system firmware */
+	image_addr = dma_map_single(*p_image, *p_size, DMA_BIDIRECTIONAL);
+
 	debug("Authenticating image at address 0x%016llx\n", image_addr);
 	debug("Authenticating image of size %d bytes\n", image_size);
 
-	flush_dcache_range((unsigned long)image_addr,
-			   ALIGN((unsigned long)image_addr + image_size,
-				 ARCH_DMA_MINALIGN));
-
 	/* Authenticate image */
 	ret = proc_ops->proc_auth_boot_image(ti_sci, &image_addr, &image_size);
 	if (ret) {
@@ -94,10 +93,9 @@ void ti_secure_image_post_process(void **p_image, size_t *p_size)
 		hang();
 	}
 
+	/* Invalidate any stale lines over data written by system firmware */
 	if (image_size)
-		invalidate_dcache_range((unsigned long)image_addr,
-					ALIGN((unsigned long)image_addr +
-					      image_size, ARCH_DMA_MINALIGN));
+		dma_unmap_single(image_addr, image_size, DMA_BIDIRECTIONAL);
 
 	/*
 	 * The image_size returned may be 0 when the authentication process has