From: Marek Vasut <marek.vasut+renesas@mailbox.org>
Date: Sun, 19 Mar 2023 17:09:42 +0000 (+0100)
Subject: phy: Add .set_mode and .set_speed callbacks
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=b0177a24d48e4ce13bfd7fce0d9c17dc0996f9a5;p=u-boot.git

phy: Add .set_mode and .set_speed callbacks

Add two new callbacks matching the Linux ones. The .set_mode is used to set
PHY mode and submode, where mode is either USB, Ethernet, and so on, while
submode is e.g. for Ethernet case RGMII, RMII, and so on. The .set_speed is
used to configure link speed into the PHY. Unlike the existing configure
callback, which is used to pass arbitrary custom information to the PHY,
these two callbacks are used to pass standardized set of information to
the PHY.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---

diff --git a/drivers/phy/phy-uclass.c b/drivers/phy/phy-uclass.c
index 3fef5135a9..83e4b63079 100644
--- a/drivers/phy/phy-uclass.c
+++ b/drivers/phy/phy-uclass.c
@@ -351,6 +351,28 @@ int generic_phy_configure(struct phy *phy, void *params)
 	return ops->configure ? ops->configure(phy, params) : 0;
 }
 
+int generic_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct phy_ops const *ops;
+
+	if (!generic_phy_valid(phy))
+		return 0;
+	ops = phy_dev_ops(phy->dev);
+
+	return ops->set_mode ? ops->set_mode(phy, mode, submode) : 0;
+}
+
+int generic_phy_set_speed(struct phy *phy, int speed)
+{
+	struct phy_ops const *ops;
+
+	if (!generic_phy_valid(phy))
+		return 0;
+	ops = phy_dev_ops(phy->dev);
+
+	return ops->set_speed ? ops->set_speed(phy, speed) : 0;
+}
+
 int generic_phy_get_bulk(struct udevice *dev, struct phy_bulk *bulk)
 {
 	int i, ret, count;
diff --git a/include/generic-phy.h b/include/generic-phy.h
index 8dca21b128..bee4de8a0b 100644
--- a/include/generic-phy.h
+++ b/include/generic-phy.h
@@ -11,6 +11,29 @@
 
 struct ofnode_phandle_args;
 
+enum phy_mode {
+	PHY_MODE_INVALID,
+	PHY_MODE_USB_HOST,
+	PHY_MODE_USB_HOST_LS,
+	PHY_MODE_USB_HOST_FS,
+	PHY_MODE_USB_HOST_HS,
+	PHY_MODE_USB_HOST_SS,
+	PHY_MODE_USB_DEVICE,
+	PHY_MODE_USB_DEVICE_LS,
+	PHY_MODE_USB_DEVICE_FS,
+	PHY_MODE_USB_DEVICE_HS,
+	PHY_MODE_USB_DEVICE_SS,
+	PHY_MODE_USB_OTG,
+	PHY_MODE_UFS_HS_A,
+	PHY_MODE_UFS_HS_B,
+	PHY_MODE_PCIE,
+	PHY_MODE_ETHERNET,
+	PHY_MODE_MIPI_DPHY,
+	PHY_MODE_SATA,
+	PHY_MODE_LVDS,
+	PHY_MODE_DP
+};
+
 /**
  * struct phy - A handle to (allowing control of) a single phy port.
  *
@@ -136,6 +159,32 @@ struct phy_ops {
 	 * Return: 0 if OK, or a negative error code
 	 */
 	int	(*configure)(struct phy *phy, void *params);
+
+	/**
+	 * set_mode - set PHY device mode
+	 *
+	 * @phy:	PHY port to be configured
+	 * @mode: PHY mode
+	 * @submode: PHY submode
+	 *
+	 * Configure PHY mode (e.g. USB, Ethernet, ...) and submode
+	 * (e.g. for Ethernet this can be RGMII).
+	 *
+	 * Return: 0 if OK, or a negative error code
+	 */
+	int	(*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
+
+	/**
+	 * set_speed - set PHY device speed
+	 *
+	 * @phy:	PHY port to be configured
+	 * @speed: PHY speed
+	 *
+	 * Configure PHY speed (e.g. for Ethernet, this could be 10 or 100 ...).
+	 *
+	 * Return: 0 if OK, or a negative error code
+	 */
+	int	(*set_speed)(struct phy *phy, int speed);
 };
 
 /**
@@ -206,6 +255,24 @@ int generic_phy_power_off(struct phy *phy);
  */
 int generic_phy_configure(struct phy *phy, void *params);
 
+/**
+ * generic_phy_set_mode() - set PHY device mode
+ *
+ * @phy:	PHY port to be configured
+ * @mode: PHY mode
+ * @submode: PHY submode
+ * Return: 0 if OK, or a negative error code
+ */
+int generic_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode);
+
+/**
+ * generic_phy_set_speed() - set PHY device speed
+ *
+ * @phy:	PHY port to be configured
+ * @speed: PHY speed
+ * Return: 0 if OK, or a negative error code
+ */
+int generic_phy_set_speed(struct phy *phy, int speed);
 
 /**
  * generic_phy_get_by_index() - Get a PHY device by integer index.
@@ -394,6 +461,16 @@ static inline int generic_phy_configure(struct phy *phy, void *params)
 	return 0;
 }
 
+static inline int generic_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	return 0;
+}
+
+static inline int generic_phy_set_speed(struct phy *phy, int speed)
+{
+	return 0;
+}
+
 static inline int generic_phy_get_by_index(struct udevice *user, int index,
 			     struct phy *phy)
 {