From: Ye Li <ye.li@nxp.com>
Date: Thu, 11 Jul 2019 03:33:34 +0000 (+0000)
Subject: serial_lpuart: Fix config check issue when using clk driver in SPL
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=af325e9597dfe47943f6f3b92d0b7012317f4a53;p=u-boot.git

serial_lpuart: Fix config check issue when using clk driver in SPL

Should use CONFIG_IS_ENABLED not IS_ENABLED for CLK driver, so it will
check the CONFIG_SPL_CLK when building SPL

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---

diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
index 57dd4a72c6..4b0a964d1b 100644
--- a/drivers/serial/serial_lpuart.c
+++ b/drivers/serial/serial_lpuart.c
@@ -106,7 +106,7 @@ u32 __weak get_lpuart_clk(void)
 	return CONFIG_SYS_CLK_FREQ;
 }
 
-#if IS_ENABLED(CONFIG_CLK)
+#if CONFIG_IS_ENABLED(CLK)
 static int get_lpuart_clk_rate(struct udevice *dev, u32 *clk)
 {
 	struct clk per_clk;
@@ -148,7 +148,7 @@ static void _lpuart_serial_setbrg(struct udevice *dev,
 	u16 sbr;
 	int ret;
 
-	if (IS_ENABLED(CONFIG_CLK)) {
+	if (CONFIG_IS_ENABLED(CLK)) {
 		ret = get_lpuart_clk_rate(dev, &clk);
 		if (ret)
 			return;
@@ -237,7 +237,7 @@ static void _lpuart32_serial_setbrg_7ulp(struct udevice *dev,
 	u32 clk;
 	int ret;
 
-	if (IS_ENABLED(CONFIG_CLK)) {
+	if (CONFIG_IS_ENABLED(CLK)) {
 		ret = get_lpuart_clk_rate(dev, &clk);
 		if (ret)
 			return;
@@ -306,7 +306,7 @@ static void _lpuart32_serial_setbrg(struct udevice *dev,
 	u32 sbr;
 	int ret;
 
-	if (IS_ENABLED(CONFIG_CLK)) {
+	if (CONFIG_IS_ENABLED(CLK)) {
 		ret = get_lpuart_clk_rate(dev, &clk);
 		if (ret)
 			return;