From: Andrew Thomas Date: Mon, 18 Jun 2018 18:56:06 +0000 (-0700) Subject: dwc2 USB controller hangs with lan78xx X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=af15946aa081dbcd0bec7d507a2b2db4e6b6cda5;p=u-boot.git dwc2 USB controller hangs with lan78xx This bug is the combination of dwc2 USB controller and lan78xx USB ethernet controller, which is the combination in use on the Raspberry Pi Model 3 B+. When the host attempts to receive a packet, but a packet has not arrived, the lan78xx controller responds by setting BIR (Bulk-In Empty Response) to NAK. Unfortunately, this hangs the USB controller and requires the USB controller to be reset. The fix proposed is to have the lan78xx controller respond by setting BIR to ZLP. Signed-off-by: Andrew Thomas Tested-by: Peter Robinson Reviewed-by: Alexander Graf --- diff --git a/drivers/usb/eth/lan78xx.c b/drivers/usb/eth/lan78xx.c index c5ff3797cf..e8ee6650bc 100644 --- a/drivers/usb/eth/lan78xx.c +++ b/drivers/usb/eth/lan78xx.c @@ -296,7 +296,7 @@ static int lan78xx_basic_reset(struct usb_device *udev, ret = lan7x_read_reg(udev, LAN78XX_USB_CFG0, &val); if (ret) return ret; - val |= LAN78XX_USB_CFG0_BIR; + val &= ~LAN78XX_USB_CFG0_BIR; return lan7x_write_reg(udev, LAN78XX_USB_CFG0, val); }