From: Jens Scharsig (BuS Elektronik) Date: Wed, 16 Jan 2013 07:24:10 +0000 (+0100) Subject: m68k: fix debug call befor serial init X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=aea5eee126eab0d49fd52da212e51d83749d30e7;p=u-boot.git m68k: fix debug call befor serial init There is a debug call in board.c befor serial interface was initialized. This moves the debug code behind serial_initialize call. Signed-off-by: Jens Scharsig (BuS Elektronik) --- diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index b2e3068364..efc9fccc1b 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -403,14 +403,14 @@ void board_init_r (gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); - WATCHDOG_RESET (); gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; serial_initialize(); + debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr); + monitor_flash_len = (ulong)&__init_end - dest_addr; #if defined(CONFIG_NEEDS_MANUAL_RELOC)