From: Simon Goldschmidt Date: Sat, 17 Nov 2018 09:24:41 +0000 (+0100) Subject: net: designware: fix tx packet length X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ae8ac8d423675904fdbf1510ad71e37d71db0568;p=u-boot.git net: designware: fix tx packet length The designware driver has a bug in setting the tx length into the dma descriptor: it always or's the length into the descriptor without zeroing out the length mask before. This results in occasional packets being transmitted with a length greater than they should be (trailer). Due to the nature of Ethernet allowing such a trailer, most packets seem to be parsed fine by remote hosts, which is probably why this hasn't been noticed. Fix this by correctly clearing the size mask before setting the new length. Tested on socfpga gen5. Signed-off-by: Simon Goldschmidt Acked-by: Joe Hershberger Reviewed-by: Philipp Tomsich --- diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 4fa26abc1b..01abcc21d2 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -389,15 +389,17 @@ static int _dw_eth_send(struct dw_eth_dev *priv, void *packet, int length) #if defined(CONFIG_DW_ALTDESCRIPTOR) desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST; - desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & - DESC_TXCTRL_SIZE1MASK; + desc_p->dmamac_cntl = (desc_p->dmamac_cntl & ~DESC_TXCTRL_SIZE1MASK) | + ((length << DESC_TXCTRL_SIZE1SHFT) & + DESC_TXCTRL_SIZE1MASK); desc_p->txrx_status &= ~(DESC_TXSTS_MSK); desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA; #else - desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & - DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | - DESC_TXCTRL_TXFIRST; + desc_p->dmamac_cntl = (desc_p->dmamac_cntl & ~DESC_TXCTRL_SIZE1MASK) | + ((length << DESC_TXCTRL_SIZE1SHFT) & + DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | + DESC_TXCTRL_TXFIRST; desc_p->txrx_status = DESC_TXSTS_OWNBYDMA; #endif