From: Andre Przywara Date: Fri, 15 Jul 2022 15:52:14 +0000 (+0100) Subject: sunxi: remove CONFIG_SATAPWR X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ae79c1d01f735b37a6aba58369d9ffdbd33e4e5b;p=u-boot.git sunxi: remove CONFIG_SATAPWR The CONFIG_SATAPWR Kconfig symbol was used to point to a GPIO that enables the power for a SATA harddisk. In the DT this is described with the target-supply property in the AHCI DT node, pointing to a (GPIO controlled) regulator. Since we need SATA only in U-Boot proper, and use a DM driver for AHCI there, we should use the DT instead of hardcoding this. Add code to the sunxi AHCI driver to check the DT for that regulator and enable it, at probe time. Then drop the current code from board.c, which was doing that job before. This allows us to remove the SATAPWR Kconfig definition and the respective values from the defconfigs. We also select the generic fixed regulator driver, which handles those GPIO controlled regulators. Please note that the OrangePi Plus is a bit special here, it's a H3 board without native SATA, but with a USB-to-SATA bridge. The DT models the SATA power via a VBUS supply regulator, which we don't parse yet in the USB PHY driver. Use the hardcoded CONFIG_USB3_VBUS_PIN for that board meanwhile. Signed-off-by: Andre Przywara Reviewed-by: Sam Edwards Reviewed-by: Samuel Holland --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 531b081de9..dcccbfea42 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1159,6 +1159,8 @@ config ARCH_SUNXI imply CMD_GPT imply CMD_UBI if MTD_RAW_NAND imply DISTRO_DEFAULTS + imply DM_REGULATOR + imply DM_REGULATOR_FIXED imply FAT_WRITE imply FIT imply OF_LIBFDT_OVERLAY diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 9d5df2c102..1b24dfe4dd 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1008,14 +1008,6 @@ config VIDEO_LCD_TL059WV5C0 endchoice -config SATAPWR - string "SATA power pin" - default "" - help - Set the pins used to power the SATA. This takes a string in the - format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of - port H. - config GMAC_TX_DELAY int "GMAC Transmit Clock Delay Chain" default 0 diff --git a/board/sunxi/board.c b/board/sunxi/board.c index ebaa943198..50a60e760d 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -187,7 +187,7 @@ enum env_location env_get_location(enum env_operation op, int prio) /* add board specific code here */ int board_init(void) { - __maybe_unused int id_pfr1, ret, satapwr_pin, macpwr_pin; + __maybe_unused int id_pfr1, ret, macpwr_pin; gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100); @@ -225,20 +225,6 @@ int board_init(void) return ret; /* strcmp() would look better, but doesn't get optimised away. */ - if (CONFIG_SATAPWR[0]) { - satapwr_pin = sunxi_name_to_gpio(CONFIG_SATAPWR); - if (satapwr_pin >= 0) { - gpio_request(satapwr_pin, "satapwr"); - gpio_direction_output(satapwr_pin, 1); - - /* - * Give the attached SATA device time to power-up - * to avoid link timeouts - */ - mdelay(500); - } - } - if (CONFIG_MACPWR[0]) { macpwr_pin = sunxi_name_to_gpio(CONFIG_MACPWR); if (macpwr_pin >= 0) { diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index df4fdfaba4..57e91d0f01 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=480 CONFIG_DRAM_EMR1=4 CONFIG_SYS_CLK_FREQ=912000000 CONFIG_I2C1_ENABLE=y -CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index be49e9323a..44770ffb04 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -8,7 +8,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y -CONFIG_SATAPWR="PC3" CONFIG_SPL_SPI_SUNXI=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 43cd28c3dd..e10660c933 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=384 CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y -CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 7c77f38fba..4ed666a034 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_I2C1_ENABLE=y -CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig index 02116995a3..ca5869f43d 100644 --- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig +++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=384 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_I2C1_ENABLE=y CONFIG_VIDEO_VGA=y -CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 895e8dbcbd..db4270f9b2 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=384 CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_I2C1_ENABLE=y CONFIG_VIDEO_VGA=y -CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 5bcc9f9f3c..ac900477d1 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=384 CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB0_VBUS_DET="PH5" -CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig index e5881090dd..00a98140b3 100644 --- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig +++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig @@ -8,7 +8,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y -CONFIG_SATAPWR="PC3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig index 592a79a6c7..f4ae3ae6d8 100644 --- a/configs/A20-Olimex-SOM204-EVB_defconfig +++ b/configs/A20-Olimex-SOM204-EVB_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=384 CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_I2C1_ENABLE=y -CONFIG_SATAPWR="PC3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 0c23368741..ef4f11b7c6 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 -CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 71743f7b8a..ab3f65ad66 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 -CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 184f305b19..184143d708 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -8,7 +8,6 @@ CONFIG_USB0_VBUS_PIN="PH17" CONFIG_USB0_VBUS_DET="PH22" CONFIG_USB0_ID_DET="PH19" CONFIG_VIDEO_VGA=y -CONFIG_SATAPWR="PH12" CONFIG_GMAC_TX_DELAY=1 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index 5d05f33798..d03fa62196 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 -CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index 5294608459..9639cb6aad 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_MACPWR="PH23" -CONFIG_SATAPWR="PB3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index e3e30a4949..9eb9a918ae 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_ZQ=122 CONFIG_USB1_VBUS_PIN="PH11" -CONFIG_SATAPWR="PH2" CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 1fda0db4c9..7db10e685b 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=122 -CONFIG_SATAPWR="PH2" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig index 5642e52ec5..ad41dbd26a 100644 --- a/configs/Sinovoip_BPI_M3_defconfig +++ b/configs/Sinovoip_BPI_M3_defconfig @@ -12,7 +12,6 @@ CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" CONFIG_USB0_ID_DET="PH11" CONFIG_USB1_VBUS_PIN="PD24" CONFIG_AXP_GPIO=y -CONFIG_SATAPWR="PD25" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y CONFIG_PHY_REALTEK=y diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig index 76de72aa22..ed585881d4 100644 --- a/configs/orangepi_plus_defconfig +++ b/configs/orangepi_plus_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=672 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PG13" -CONFIG_SATAPWR="PG11" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y @@ -16,3 +15,4 @@ CONFIG_SUN8I_EMAC=y CONFIG_SY8106A_POWER=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB3_VBUS_PIN="PG11" diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c index 94a3379c53..9064774e66 100644 --- a/drivers/ata/ahci_sunxi.c +++ b/drivers/ata/ahci_sunxi.c @@ -7,6 +7,7 @@ #include #include #include +#include #define AHCI_PHYCS0R 0x00c0 #define AHCI_PHYCS1R 0x00c4 @@ -74,6 +75,7 @@ static int sunxi_ahci_phy_init(u8 *reg_base) static int sunxi_sata_probe(struct udevice *dev) { + struct udevice *reg_dev; ulong base; u8 *reg; int ret; @@ -89,6 +91,13 @@ static int sunxi_sata_probe(struct udevice *dev) debug("%s: Failed to init phy (err=%d)\n", __func__, ret); return ret; } + + ret = device_get_supply_regulator(dev, "target-supply", ®_dev); + if (ret == 0) { + regulator_set_enable(reg_dev, true); + mdelay(500); + } + ret = ahci_probe_scsi(dev, base); if (ret) { debug("%s: Failed to probe (err=%d)\n", __func__, ret);