From: Tom Rini Date: Sat, 12 Mar 2022 04:07:29 +0000 (-0500) Subject: Convert CONFIG_AM335X_USB0 et al to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ae3f467e8422d7408f968c6e041f64f9340c745a;p=u-boot.git Convert CONFIG_AM335X_USB0 et al to Kconfig This converts the following to Kconfig: CONFIG_AM335X_USB0 CONFIG_AM335X_USB0_MODE CONFIG_AM335X_USB1 CONFIG_AM335X_USB1_MODE We do this by introducing specific options for static configuration of USB0/USB1 in SPL rather than defining CONFIG_AM335X_USBx_MODE to the enum value being used. Furthermore, with how the code is used now we do not need to have OTG mode exposed as an option here, so remove that. Signed-off-by: Tom Rini --- diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 1402376915..b8e115dc92 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -280,3 +280,35 @@ config PUB_ROM_DATA_SIZE image, this area is no longer used, and can be reclaimed for run time use by the boot image. endif + +config AM335X_USB0 + bool "Static mode configuration for USB0 in SPL" + depends on AM33XX && SPL_MUSB_NEW && !SPL_OF_CONTROL + +choice + prompt "USB0 port configuration" + depends on AM335X_USB0 + +config AM335X_USB0_HOST + bool "Port is used in host mode" + +config AM335X_USB0_PERIPHERAL + bool "Port is used in peripheral mode" + +endchoice + +config AM335X_USB1 + bool "Static mode configuration for USB1 in SPL" + depends on AM33XX && SPL_MUSB_NEW && !SPL_OF_CONTROL + +choice + prompt "USB1 port configuration" + depends on AM335X_USB1 + +config AM335X_USB1_HOST + bool "Port is used in host mode" + +config AM335X_USB1_PERIPHERAL + bool "Port is used in peripheral mode" + +endchoice diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index bcc907ce36..5175eb01cb 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -241,14 +241,14 @@ static struct ti_musb_plat usb1 = { }; U_BOOT_DRVINFOS(am33xx_usbs) = { -#if CONFIG_AM335X_USB0_MODE == MUSB_PERIPHERAL +#ifdef CONFIG_AM335X_USB0_PERIPHERAL { "ti-musb-peripheral", &usb0 }, -#elif CONFIG_AM335X_USB0_MODE == MUSB_HOST +#elif defined(CONFIG_AM335X_USB0_HOST) { "ti-musb-host", &usb0 }, #endif -#if CONFIG_AM335X_USB1_MODE == MUSB_PERIPHERAL +#ifdef CONFIG_AM335X_USB1_PERIPHERAL { "ti-musb-peripheral", &usb1 }, -#elif CONFIG_AM335X_USB1_MODE == MUSB_HOST +#elif defined(CONFIG_AM335X_USB1_HOST) { "ti-musb-host", &usb1 }, #endif }; diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 535b269076..497127d406 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -4,6 +4,9 @@ CONFIG_ARCH_OMAP2PLUS=y CONFIG_TI_COMMON_CMD_OPTIONS=y CONFIG_DEFAULT_DEVICE_TREE="am335x-evm" CONFIG_AM33XX=y +CONFIG_AM335X_USB0=y +CONFIG_AM335X_USB0_PERIPHERAL=y +CONFIG_AM335X_USB1=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_TIMESTAMP=y diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig index ca3d01aea4..f8cc073c23 100644 --- a/configs/am335x_guardian_defconfig +++ b/configs/am335x_guardian_defconfig @@ -10,6 +10,9 @@ CONFIG_ENV_OFFSET=0x500000 CONFIG_DEFAULT_DEVICE_TREE="am335x-guardian" CONFIG_AM33XX=y CONFIG_TARGET_AM335X_GUARDIAN=y +CONFIG_AM335X_USB0=y +CONFIG_AM335X_USB0_PERIPHERAL=y +CONFIG_AM335X_USB1=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 9070845b7a..4db04ff54e 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -201,18 +201,6 @@ * in memory. */ -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - /* * Disable MMC DM for SPL build and can be re-enabled after adding * DM support in SPL diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index 10a95a10a0..608a22db44 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -129,9 +129,4 @@ #endif /* CONFIG_MTD_RAW_NAND */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - #endif /* ! __CONFIG_AM335X_GUARDIAN_H */ diff --git a/include/configs/baltos.h b/include/configs/baltos.h index f4ab6640cd..b881d8c03f 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -214,18 +214,6 @@ #endif #endif -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_HOST -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_OTG - /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND #define GPMC_NAND_ECC_LP_x8_LAYOUT 1 diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index fe49627263..aa2a07e910 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -127,10 +127,6 @@ #define CONFIG_SYS_NAND_ECCBYTES 14 /* NAND: SPL related configs */ -/* USB configuration */ -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - /* * Disable MMC DM for SPL build and can be re-enabled after adding * DM support in SPL diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index c3a04c2f65..bfadf4a6b8 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -104,13 +104,6 @@ */ #ifndef CONFIG_SPL_BUILD -/* - * USB configuration - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST /* USB DRACO ID as default */ #define CONFIG_USBD_HS