From: Simon Glass Date: Tue, 14 Oct 2014 05:42:05 +0000 (-0600) Subject: spi: Use error return value in sf_ops X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ae242cbfd0fc2b9e791688b3d9d6a19900ff3d31;p=u-boot.git spi: Use error return value in sf_ops Adjust spi_flash_probe_slave() to return an error value instead of a pointer so we get the correct error return. Have the caller allocate memory for spi_flash to simplify error handling, and also so that driver model can use its existing allocated memory. Add a spi.h include in the sf_params file. Signed-off-by: Simon Glass Reviewed-by: Jagannadha Sutradharudu Teki --- diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 4d148d1ace..212a825ada 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -95,15 +96,15 @@ static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0) } } -static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, - u8 *idcode) +static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, + struct spi_flash *flash) { const struct spi_flash_params *params; - struct spi_flash *flash; u8 cmd; u16 jedec = idcode[1] << 8 | idcode[2]; u16 ext_jedec = idcode[3] << 8 | idcode[4]; + /* Validate params from spi_flash_params table */ params = spi_flash_params_table; for (; params->name != NULL; params++) { if ((params->jedec >> 16) == idcode[0]) { @@ -120,13 +121,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, printf("SF: Unsupported flash IDs: "); printf("manuf %02x, jedec %04x, ext_jedec %04x\n", idcode[0], jedec, ext_jedec); - return NULL; - } - - flash = calloc(1, sizeof(*flash)); - if (!flash) { - debug("SF: Failed to allocate spi_flash\n"); - return NULL; + return -EPROTONOSUPPORT; } /* Assign spi data */ @@ -227,15 +222,18 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, #ifdef CONFIG_SPI_FLASH_BAR u8 curr_bank = 0; if (flash->size > SPI_FLASH_16MB_BOUN) { + int ret; + flash->bank_read_cmd = (idcode[0] == 0x01) ? CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR; flash->bank_write_cmd = (idcode[0] == 0x01) ? CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR; - if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1, - &curr_bank, 1)) { + ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1, + &curr_bank, 1); + if (ret) { debug("SF: fail to read bank addr register\n"); - return NULL; + return ret; } flash->bank_curr = curr_bank; } else { @@ -250,7 +248,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, spi_flash_cmd_write_status(flash, 0); #endif - return flash; + return 0; } #ifdef CONFIG_OF_CONTROL @@ -309,23 +307,29 @@ static int spi_enable_wp_pin(struct spi_flash *flash) } #endif -static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) +/** + * spi_flash_probe_slave() - Probe for a SPI flash device on a bus + * + * @spi: Bus to probe + * @flashp: Pointer to place to put flash info, which may be NULL if the + * space should be allocated + */ +int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash) { - struct spi_flash *flash = NULL; u8 idcode[5]; int ret; /* Setup spi_slave */ if (!spi) { printf("SF: Failed to set up slave\n"); - return NULL; + return -ENODEV; } /* Claim spi bus */ ret = spi_claim_bus(spi); if (ret) { debug("SF: Failed to claim SPI bus: %d\n", ret); - goto err_claim_bus; + return ret; } /* Read the ID codes */ @@ -340,10 +344,10 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) print_buffer(0, idcode, 1, sizeof(idcode), 0); #endif - /* Validate params from spi_flash_params table */ - flash = spi_flash_validate_params(spi, idcode); - if (!flash) + if (spi_flash_validate_params(spi, idcode, flash)) { + ret = -EINVAL; goto err_read_id; + } /* Set the quad enable bit - only for quad commands */ if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || @@ -351,13 +355,15 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { if (spi_flash_set_qeb(flash, idcode[0])) { debug("SF: Fail to set QEB for %02x\n", idcode[0]); - return NULL; + ret = -EINVAL; + goto err_read_id; } } #ifdef CONFIG_OF_CONTROL if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { debug("SF: FDT decode error\n"); + ret = -EINVAL; goto err_read_id; } #endif @@ -385,32 +391,50 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) /* Release spi bus */ spi_release_bus(spi); - return flash; + return 0; err_read_id: spi_release_bus(spi); -err_claim_bus: - spi_free_slave(spi); - return NULL; + return ret; +} + +static struct spi_flash *spi_flash_probe_tail(struct spi_slave *bus) +{ + struct spi_flash *flash; + + /* Allocate space if needed (not used by sf-uclass */ + flash = calloc(1, sizeof(*flash)); + if (!flash) { + debug("SF: Failed to allocate spi_flash\n"); + return NULL; + } + + if (spi_flash_probe_slave(bus, flash)) { + spi_free_slave(bus); + free(flash); + return NULL; + } + + return flash; } -struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, +struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs, unsigned int max_hz, unsigned int spi_mode) { - struct spi_slave *spi; + struct spi_slave *bus; - spi = spi_setup_slave(bus, cs, max_hz, spi_mode); - return spi_flash_probe_slave(spi); + bus = spi_setup_slave(busnum, cs, max_hz, spi_mode); + return spi_flash_probe_tail(bus); } #ifdef CONFIG_OF_SPI_FLASH struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node, int spi_node) { - struct spi_slave *spi; + struct spi_slave *bus; - spi = spi_setup_slave_fdt(blob, slave_node, spi_node); - return spi_flash_probe_slave(spi); + bus = spi_setup_slave_fdt(blob, slave_node, spi_node); + return spi_flash_probe_tail(bus); } #endif