From: Samuel Holland Date: Thu, 7 May 2020 23:10:50 +0000 (-0500) Subject: net: sun8i_emac: Use consistent clock bitfield definitions X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=abdbefba2a4e9666f798de13b4b88021f23b19f3;p=u-boot.git net: sun8i_emac: Use consistent clock bitfield definitions While the R40 uses a different register for EMAC clock configuration than other chips, the register has a very similar layout. Reuse the existing bitfield definitions in this file, since they match. This allows the driver to compile on the H6 platform, where the CCM_GMAC_CTRL definitions are not present. Signed-off-by: Samuel Holland Reviewed-by: Jagan Teki --- diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 99e24c6348..edbec9f3a8 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -300,9 +300,9 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata, if (priv->variant == R40_GMAC) { /* Select RGMII for R40 */ reg = readl(priv->sysctl_reg + 0x164); - reg |= CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | - CCM_GMAC_CTRL_GPIT_RGMII | - CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY); + reg |= SC_ETCS_INT_GMII | + SC_EPIT | + (CONFIG_GMAC_TX_DELAY << SC_ETXDC_OFFSET); writel(reg, priv->sysctl_reg + 0x164); return 0;