From: Lokesh Vutla Date: Wed, 4 Sep 2019 10:31:36 +0000 (+0530) Subject: remoteproc: Introduce K3 C66 and C71 remoteproc driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ab827b385718be0aceefb9cd20108265ebb90572;p=u-boot.git remoteproc: Introduce K3 C66 and C71 remoteproc driver Certain SoCs with K3 architecture have integrated a C66 Corepac DSP subsystem and an advanced C71 DSPs. Introduce a remoteproc driver that that does take care of loading an elf to any of the specified DSPs and start it. Signed-off-by: Lokesh Vutla Signed-off-by: Suman Anna --- diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index c2d59ba000..7c2e4804b5 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -52,6 +52,16 @@ config REMOTEPROC_TI_K3_ARM64 on various TI K3 family of SoCs through the remote processor framework. +config REMOTEPROC_TI_K3_DSP + bool "TI K3 C66 and C71 remoteproc support" + select REMOTEPROC + depends on ARCH_K3 + depends on TI_SCI_PROTOCOL + help + Say y here to support TI's C66/C71 remote processor subsystems + on various TI K3 family of SoCs through the remote processor + framework. + config REMOTEPROC_TI_K3_R5F bool "TI K3 R5F remoteproc support" select REMOTEPROC diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 9d247ba5e7..69ae7bd1e8 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -11,5 +11,6 @@ obj-$(CONFIG_K3_SYSTEM_CONTROLLER) += k3_system_controller.o obj-$(CONFIG_REMOTEPROC_SANDBOX) += sandbox_testproc.o obj-$(CONFIG_REMOTEPROC_STM32_COPRO) += stm32_copro.o obj-$(CONFIG_REMOTEPROC_TI_K3_ARM64) += ti_k3_arm64_rproc.o +obj-$(CONFIG_REMOTEPROC_TI_K3_DSP) += ti_k3_dsp_rproc.o obj-$(CONFIG_REMOTEPROC_TI_K3_R5F) += ti_k3_r5f_rproc.o obj-$(CONFIG_REMOTEPROC_TI_POWER) += ti_power_proc.o diff --git a/drivers/remoteproc/ti_k3_dsp_rproc.c b/drivers/remoteproc/ti_k3_dsp_rproc.c new file mode 100644 index 0000000000..c5dc6b25da --- /dev/null +++ b/drivers/remoteproc/ti_k3_dsp_rproc.c @@ -0,0 +1,354 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Texas Instruments' K3 DSP Remoteproc driver + * + * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ti_sci_proc.h" + +#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1) + +/** + * struct k3_dsp_mem - internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: Bus address used to access the memory region + * @dev_addr: Device address from remoteproc view + * @size: Size of the memory region + */ +struct k3_dsp_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + phys_addr_t dev_addr; + size_t size; +}; + +/** + * struct k3_dsp_privdata - Structure representing Remote processor data. + * @rproc_rst: rproc reset control data + * @tsp: Pointer to TISCI proc contrl handle + * @mem: Array of available memories + * @num_mem: Number of available memories + */ +struct k3_dsp_privdata { + struct reset_ctl dsp_rst; + struct ti_sci_proc tsp; + struct k3_dsp_mem *mem; + int num_mems; +}; + +/** + * k3_dsp_load() - Load up the Remote processor image + * @dev: rproc device pointer + * @addr: Address at which image is available + * @size: size of the image + * + * Return: 0 if all goes good, else appropriate error message. + */ +static int k3_dsp_load(struct udevice *dev, ulong addr, ulong size) +{ + struct k3_dsp_privdata *dsp = dev_get_priv(dev); + u32 boot_vector; + int ret; + + dev_dbg(dev, "%s addr = 0x%lx, size = 0x%lx\n", __func__, addr, size); + ret = ti_sci_proc_request(&dsp->tsp); + if (ret) + return ret; + + ret = rproc_elf_load_image(dev, addr, size); + if (ret < 0) { + dev_err(dev, "Loading elf failed %d\n", ret); + goto proc_release; + } + + boot_vector = rproc_elf_get_boot_addr(dev, addr); + + dev_dbg(dev, "%s: Boot vector = 0x%x\n", __func__, boot_vector); + + ret = ti_sci_proc_set_config(&dsp->tsp, boot_vector, 0, 0); +proc_release: + ti_sci_proc_release(&dsp->tsp); + return ret; +} + +/** + * k3_dsp_start() - Start the remote processor + * @dev: rproc device pointer + * + * Return: 0 if all went ok, else return appropriate error + */ +static int k3_dsp_start(struct udevice *dev) +{ + struct k3_dsp_privdata *dsp = dev_get_priv(dev); + int ret; + + dev_dbg(dev, "%s\n", __func__); + + ret = ti_sci_proc_request(&dsp->tsp); + if (ret) + return ret; + /* + * Setting the right clock frequency would have taken care by + * assigned-clock-rates during the device probe. So no need to + * set the frequency again here. + */ + ret = ti_sci_proc_power_domain_on(&dsp->tsp); + if (ret) + goto proc_release; + + ret = reset_deassert(&dsp->dsp_rst); + +proc_release: + ti_sci_proc_release(&dsp->tsp); + + return ret; +} + +static int k3_dsp_stop(struct udevice *dev) +{ + struct k3_dsp_privdata *dsp = dev_get_priv(dev); + + dev_dbg(dev, "%s\n", __func__); + + ti_sci_proc_request(&dsp->tsp); + reset_assert(&dsp->dsp_rst); + ti_sci_proc_power_domain_off(&dsp->tsp); + ti_sci_proc_release(&dsp->tsp); + + return 0; +} + +/** + * k3_dsp_init() - Initialize the remote processor + * @dev: rproc device pointer + * + * Return: 0 if all went ok, else return appropriate error + */ +static int k3_dsp_init(struct udevice *dev) +{ + dev_dbg(dev, "%s\n", __func__); + + return 0; +} + +static int k3_dsp_reset(struct udevice *dev) +{ + dev_dbg(dev, "%s\n", __func__); + + return 0; +} + +static void *k3_dsp_da_to_va(struct udevice *dev, ulong da, ulong len) +{ + struct k3_dsp_privdata *dsp = dev_get_priv(dev); + phys_addr_t bus_addr, dev_addr; + void __iomem *va = NULL; + size_t size; + u32 offset; + int i; + + dev_dbg(dev, "%s\n", __func__); + + if (len <= 0) + return NULL; + + for (i = 0; i < dsp->num_mems; i++) { + bus_addr = dsp->mem[i].bus_addr; + dev_addr = dsp->mem[i].dev_addr; + size = dsp->mem[i].size; + + if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = dsp->mem[i].cpu_addr + offset; + return (__force void *)va; + } + + if (da >= bus_addr && (da + len) <= (bus_addr + size)) { + offset = da - bus_addr; + va = dsp->mem[i].cpu_addr + offset; + return (__force void *)va; + } + } + + /* Assume it is DDR region and return da */ + return map_physmem(da, len, MAP_NOCACHE); +} + +static const struct dm_rproc_ops k3_dsp_ops = { + .init = k3_dsp_init, + .load = k3_dsp_load, + .start = k3_dsp_start, + .stop = k3_dsp_stop, + .reset = k3_dsp_reset, + .device_to_virt = k3_dsp_da_to_va, +}; + +static int ti_sci_proc_of_to_priv(struct udevice *dev, struct ti_sci_proc *tsp) +{ + u32 ids[2]; + int ret; + + dev_dbg(dev, "%s\n", __func__); + + tsp->sci = ti_sci_get_by_phandle(dev, "ti,sci"); + if (IS_ERR(tsp->sci)) { + dev_err(dev, "ti_sci get failed: %ld\n", PTR_ERR(tsp->sci)); + return PTR_ERR(tsp->sci); + } + + ret = dev_read_u32_array(dev, "ti,sci-proc-ids", ids, 2); + if (ret) { + dev_err(dev, "Proc IDs not populated %d\n", ret); + return ret; + } + + tsp->ops = &tsp->sci->ops.proc_ops; + tsp->proc_id = ids[0]; + tsp->host_id = ids[1]; + tsp->dev_id = dev_read_u32_default(dev, "ti,sci-dev-id", + TI_SCI_RESOURCE_NULL); + if (tsp->dev_id == TI_SCI_RESOURCE_NULL) { + dev_err(dev, "Device ID not populated %d\n", ret); + return -ENODEV; + } + + return 0; +} + +static int k3_dsp_of_get_memories(struct udevice *dev) +{ + static const char * const mem_names[] = {"l2sram", "l1pram", "l1dram"}; + struct k3_dsp_privdata *dsp = dev_get_priv(dev); + int i; + + dev_dbg(dev, "%s\n", __func__); + + dsp->num_mems = ARRAY_SIZE(mem_names); + dsp->mem = calloc(dsp->num_mems, sizeof(*dsp->mem)); + if (!dsp->mem) + return -ENOMEM; + + for (i = 0; i < dsp->num_mems; i++) { + /* C71 cores only have a L1P Cache, there are no L1P SRAMs */ + if (device_is_compatible(dev, "ti,j721e-c71-dsp") && + !strcmp(mem_names[i], "l1pram")) { + dsp->mem[i].bus_addr = FDT_ADDR_T_NONE; + dsp->mem[i].dev_addr = FDT_ADDR_T_NONE; + dsp->mem[i].cpu_addr = NULL; + dsp->mem[i].size = 0; + continue; + } + + dsp->mem[i].bus_addr = dev_read_addr_size_name(dev, mem_names[i], + (fdt_addr_t *)&dsp->mem[i].size); + if (dsp->mem[i].bus_addr == FDT_ADDR_T_NONE) { + dev_err(dev, "%s bus address not found\n", mem_names[i]); + return -EINVAL; + } + dsp->mem[i].cpu_addr = map_physmem(dsp->mem[i].bus_addr, + dsp->mem[i].size, + MAP_NOCACHE); + dsp->mem[i].dev_addr = dsp->mem[i].bus_addr & + KEYSTONE_RPROC_LOCAL_ADDRESS_MASK; + + dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %p da %pa\n", + mem_names[i], &dsp->mem[i].bus_addr, + dsp->mem[i].size, dsp->mem[i].cpu_addr, + &dsp->mem[i].dev_addr); + } + + return 0; +} + +/** + * k3_of_to_priv() - generate private data from device tree + * @dev: corresponding k3 dsp processor device + * @dsp: pointer to driver specific private data + * + * Return: 0 if all goes good, else appropriate error message. + */ +static int k3_dsp_of_to_priv(struct udevice *dev, struct k3_dsp_privdata *dsp) +{ + int ret; + + dev_dbg(dev, "%s\n", __func__); + + ret = reset_get_by_index(dev, 0, &dsp->dsp_rst); + if (ret) { + dev_err(dev, "reset_get() failed: %d\n", ret); + return ret; + } + + ret = ti_sci_proc_of_to_priv(dev, &dsp->tsp); + if (ret) + return ret; + + ret = k3_dsp_of_get_memories(dev); + if (ret) + return ret; + + return 0; +} + +/** + * k3_dsp_probe() - Basic probe + * @dev: corresponding k3 remote processor device + * + * Return: 0 if all goes good, else appropriate error message. + */ +static int k3_dsp_probe(struct udevice *dev) +{ + struct k3_dsp_privdata *dsp; + int ret; + + dev_dbg(dev, "%s\n", __func__); + + dsp = dev_get_priv(dev); + + ret = k3_dsp_of_to_priv(dev, dsp); + if (ret) { + dev_dbg(dev, "%s: Probe failed with error %d\n", __func__, ret); + return ret; + } + + dev_dbg(dev, "Remoteproc successfully probed\n"); + + return 0; +} + +static int k3_dsp_remove(struct udevice *dev) +{ + struct k3_dsp_privdata *dsp = dev_get_priv(dev); + + free(dsp->mem); + + return 0; +} + +static const struct udevice_id k3_dsp_ids[] = { + { .compatible = "ti,j721e-c66-dsp"}, + { .compatible = "ti,j721e-c71-dsp"}, + {} +}; + +U_BOOT_DRIVER(k3_dsp) = { + .name = "k3_dsp", + .of_match = k3_dsp_ids, + .id = UCLASS_REMOTEPROC, + .ops = &k3_dsp_ops, + .probe = k3_dsp_probe, + .remove = k3_dsp_remove, + .priv_auto_alloc_size = sizeof(struct k3_dsp_privdata), +};