From: Chen-Yu Tsai Date: Mon, 2 May 2016 02:28:10 +0000 (+0800) Subject: power: axp221: Remove switch case to simplify axp_set_eldo X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=aa23f539c88418333fb5300051642bc9b99d17b2;p=u-boot.git power: axp221: Remove switch case to simplify axp_set_eldo The ELDO enable bits and registers are contiguous for axp221. Instead of a switch case testing against the index, just use the index to shift the bit or register offset. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c index cb1f88b185..727ab09806 100644 --- a/drivers/power/axp221.c +++ b/drivers/power/axp221.c @@ -191,33 +191,20 @@ int axp_set_eldo(int eldo_num, unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); - u8 addr, bits; - - switch (eldo_num) { - case 3: - addr = AXP221_ELDO3_CTRL; - bits = AXP221_OUTPUT_CTRL2_ELDO3_EN; - break; - case 2: - addr = AXP221_ELDO2_CTRL; - bits = AXP221_OUTPUT_CTRL2_ELDO2_EN; - break; - case 1: - addr = AXP221_ELDO1_CTRL; - bits = AXP221_OUTPUT_CTRL2_ELDO1_EN; - break; - default: + + if (eldo_num < 1 || eldo_num > 3) return -EINVAL; - } if (mvolt == 0) - return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2, bits); + return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); - ret = pmic_bus_write(addr, cfg); + ret = pmic_bus_write(AXP221_ELDO1_CTRL + (eldo_num - 1), cfg); if (ret) return ret; - return pmic_bus_setbits(AXP221_OUTPUT_CTRL2, bits); + return pmic_bus_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); } int axp_init(void)