From: Marek Vasut Date: Tue, 23 Apr 2024 23:15:18 +0000 (+0200) Subject: ARM: dts: imx: Enable PCIe and NVMe on DH i.MX8M Plus DHCOM PDK3 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=aa0a79f3373cccee70923f252111b404d66dfa1a;p=u-boot.git ARM: dts: imx: Enable PCIe and NVMe on DH i.MX8M Plus DHCOM PDK3 Enable PCIe/NVMe support on DH i.MX8M Plus DHCOM PDK3. Except for the configuration options which are enabled, add slight adjustment to board u-boot.dtsi, which is necessary as there is currently no driver for the I2C PCIe clock generator. Since the generator is strapped to be always on, it is possible to supplant the generator functionality by fixed-clock. Signed-off-by: Marek Vasut --- diff --git a/arch/arm/dts/imx8mp-dhcom-pdk3-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-pdk3-u-boot.dtsi index 040f333c52..b0b99d5185 100644 --- a/arch/arm/dts/imx8mp-dhcom-pdk3-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-dhcom-pdk3-u-boot.dtsi @@ -4,3 +4,15 @@ */ #include "imx8mp-dhcom-u-boot.dtsi" + +/ { + clk_pcie100: clk-pcie100 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; +}; + +&pcie_phy { + clocks = <&clk_pcie100>; +}; diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig index 73079df6b2..5b338f2219 100644 --- a/configs/imx8mp_dhcom_pdk3_defconfig +++ b/configs/imx8mp_dhcom_pdk3_defconfig @@ -34,6 +34,7 @@ CONFIG_ENV_OFFSET_REDUND=0xFF0000 CONFIG_IMX_BOOTAUX=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_SYS_LOAD_ADDR=0x50000000 +CONFIG_PCI=y CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_FIT=y @@ -104,6 +105,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_BKOPS_ENABLE=y CONFIG_CMD_MTD=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_READ=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -216,7 +218,10 @@ CONFIG_DWC_ETH_QOS_IMX=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_IMX=y CONFIG_PHY_IMX8MQ_USB=y +CONFIG_PHY_IMX8M_PCIE=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y