From: Hans de Goede Date: Wed, 16 Mar 2016 19:57:28 +0000 (+0100) Subject: sunxi: Fix clock_twi_onoff for sun8i-a83 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a93b0fe3fdd65bfd79f8b77ff828347c8e382eb2;p=u-boot.git sunxi: Fix clock_twi_onoff for sun8i-a83 clock_sun8i_a83.c did not contain a clock_twi_onoff implementation at all, this is fixed by moving the clock_sun6i.c implementation, which is correct for the a83 too, to a shared location. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c index 5cc5d25d2b..0b8fc94711 100644 --- a/arch/arm/cpu/armv7/sunxi/clock.c +++ b/arch/arm/cpu/armv7/sunxi/clock.c @@ -12,6 +12,7 @@ #include #include #include +#include #include __weak void clock_init_sec(void) @@ -28,3 +29,37 @@ int clock_init(void) return 0; } + +/* These functions are shared between various SoCs so put them here. */ +#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN9I +int clock_twi_onoff(int port, int state) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (port == 5) { + if (state) + prcm_apb0_enable( + PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C); + else + prcm_apb0_disable( + PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C); + return 0; + } + + /* set the apb clock gate and reset for twi */ + if (state) { + setbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port)); + setbits_le32(&ccm->apb2_reset_cfg, + 1 << (APB2_RESET_TWI_SHIFT + port)); + } else { + clrbits_le32(&ccm->apb2_reset_cfg, + 1 << (APB2_RESET_TWI_SHIFT + port)); + clrbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port)); + } + + return 0; +} +#endif diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c index 4e1e1a4090..15272c9e71 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -85,37 +85,6 @@ void clock_init_uart(void) #endif } -int clock_twi_onoff(int port, int state) -{ - struct sunxi_ccm_reg *const ccm = - (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - - if (port == 5) { - if (state) - prcm_apb0_enable( - PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C); - else - prcm_apb0_disable( - PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C); - return 0; - } - - /* set the apb clock gate and reset for twi */ - if (state) { - setbits_le32(&ccm->apb2_gate, - CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); - setbits_le32(&ccm->apb2_reset_cfg, - 1 << (APB2_RESET_TWI_SHIFT + port)); - } else { - clrbits_le32(&ccm->apb2_reset_cfg, - 1 << (APB2_RESET_TWI_SHIFT + port)); - clrbits_le32(&ccm->apb2_gate, - CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); - } - - return 0; -} - #ifdef CONFIG_SPL_BUILD void clock_set_pll1(unsigned int clk) {