From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 29 Jul 2016 11:03:29 +0000 (+0200)
Subject: ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a9022b017a90;p=u-boot.git

ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes

Serial driver is getting clk information via DT that's why
also clk node needs to have this flag.

Different behavior was introduced by:
"dm: Use dm_scan_fdt_dev() directly where possible"
(sha1: 911954859d6dece49c3e4835faea004cfe392506)
where simple-bus driver starts to call dm_scan_fdt_dev() which has
additional logic around pre_reloc_only parameter which exclude
clk nodes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
index 3418909759..0918c686d7 100644
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -13,6 +13,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
+		u-boot,dm-pre-reloc;
 	};
 
 	clk125: clk125 {
diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi
index 48bb426daf..b3ce0de549 100644
--- a/arch/arm/dts/zynqmp-ep108-clk.dtsi
+++ b/arch/arm/dts/zynqmp-ep108-clk.dtsi
@@ -13,6 +13,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
+		u-boot,dm-pre-reloc;
 	};
 
 	i2c_clk: i2c_clk {