From: Mario Six Date: Mon, 21 Jan 2019 08:18:01 +0000 (+0100) Subject: mpc83xx: Simplify BR,OR lines X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=a8f975391f2452bc7a51eeafd030c85c32e1aca5;p=u-boot.git mpc83xx: Simplify BR,OR lines Re-format all BR,OR #define lines into single lines. This makes them harder to read, but accessible to semi-automatic replacement. Signed-off-by: Mario Six --- diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index e19bcafd5c..185f6490d7 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -175,19 +175,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ -/* Window base at flash base */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ @@ -201,18 +191,9 @@ */ #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) /* 0x00008000 */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit Port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) +/* NAND */ +#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR) /* 0xFFFF8396 */ #ifdef CONFIG_VSC7385_ENET @@ -220,18 +201,9 @@ /* VSC7385 Base address on CS2 */ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 /* 8-bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - /* 0xF0000801 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) +/* VSC7385_BASE */ +#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET) /* 0xFFFE09FF */ /* The flash address and size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE 0xFE7FE000 diff --git a/include/configs/MPC8313ERDB_NAND.h b/include/configs/MPC8313ERDB_NAND.h index bbb9d4b936..40b0264dbe 100644 --- a/include/configs/MPC8313ERDB_NAND.h +++ b/include/configs/MPC8313ERDB_NAND.h @@ -170,17 +170,6 @@ #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_9 \ - | OR_GPCM_EHTR \ - | OR_GPCM_EAD) - /* 0xFF006FF7 TODO SLOW 16 MB flash size */ - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ @@ -230,20 +219,13 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM \ - (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - /* 0xFFFF8396 */ +/* NAND */ +#define CONFIG_SYS_BR0_PRELIM (0xE2800000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR) + +/* FLASH */ +#define CONFIG_SYS_BR1_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_8MB | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* Still needed for spl_minimal.c */ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM @@ -253,20 +235,10 @@ #define CONFIG_SYS_BCSR_ADDR 0xFA000000 #define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ /* map at 0xFA000000 on LCS3 */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_BCSR_ADDR \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - /* 0xFA000801 */ -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFF8FF7 */ +/* BCSR */ +#define CONFIG_SYS_BR3_PRELIM (0xFA000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + /* Vitesse 7385 */ #ifdef CONFIG_VSC7385_ENET @@ -275,19 +247,10 @@ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFE09FF */ +/* VSC7385 */ +#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + #endif #define CONFIG_MPC83XX_GPIO 1 diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h index 1cb001864a..390ee4eb26 100644 --- a/include/configs/MPC8313ERDB_NOR.h +++ b/include/configs/MPC8313ERDB_NOR.h @@ -143,17 +143,6 @@ #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_9 \ - | OR_GPCM_EHTR \ - | OR_GPCM_EAD) - /* 0xFF006FF7 TODO SLOW 16 MB flash size */ - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ @@ -199,20 +188,13 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM \ - (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - /* 0xFFFF8396 */ +/* FLASH*/ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + +/* NAND */ +#define CONFIG_SYS_BR1_PRELIM (0xE2800000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR) /* Still needed for spl_minimal.c */ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM @@ -222,20 +204,9 @@ #define CONFIG_SYS_BCSR_ADDR 0xFA000000 #define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ /* map at 0xFA000000 on LCS3 */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_BCSR_ADDR \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - /* 0xFA000801 */ -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFF8FF7 */ +/* BCSR */ +#define CONFIG_SYS_BR3_PRELIM (0xFA000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* Vitesse 7385 */ #ifdef CONFIG_VSC7385_ENET @@ -244,19 +215,10 @@ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFE09FF */ +/* VSC7385 */ +#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + #endif #define CONFIG_MPC83XX_GPIO 1 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 86491b41d6..97b66415c9 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -177,33 +177,13 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM \ - (OR_AM_32KB \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - /* 0xFFFF8396 */ +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + +/* NAND */ +#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR) /* Still needed for spl_minimal.c */ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 30f1e4453d..fd884a1e65 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -142,20 +142,9 @@ #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size is 16M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFE006FF7 */ +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 3a8a3e4fb8..41b0223135 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -133,20 +133,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size is 16M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xfe006ff7 */ +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ @@ -159,19 +148,9 @@ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFFE9F7 */ +/* BCSR */ +#define CONFIG_SYS_BR1_PRELIM (0xF8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* * Windows to access PIB via local bus @@ -183,39 +162,18 @@ /* * CS2 on Local Bus, to PIB */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_PIB_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF8008801 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xffffe9f7 */ + +/* PIB1 */ +#define CONFIG_SYS_BR2_PRELIM (0xF8008000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* * CS3 on Local Bus, to PIB */ -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_PIB_BASE + \ - CONFIG_SYS_PIB_WINDOW_SIZE) \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF8010801 */ -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xffffe9f7 */ + +/* PIB2 */ +#define CONFIG_SYS_BR3_PRELIM (0xF8010000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* * Serial Port diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index fa73b81c3a..4cda1589b6 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -123,19 +123,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -157,18 +147,10 @@ */ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0x00000801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_CLEAR \ - | OR_GPCM_EHTR_CLEAR) - /* 0xFFFFE8F0 */ + +/* BCSR */ +#define CONFIG_SYS_BR1_PRELIM (0xE2400000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_SCY_15 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR) #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h index 218c4b1fc9..7f906c38d8 100644 --- a/include/configs/MPC8349EMDS_SDRAM.h +++ b/include/configs/MPC8349EMDS_SDRAM.h @@ -123,19 +123,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -157,18 +147,9 @@ */ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0x00000801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_CLEAR \ - | OR_GPCM_EHTR_CLEAR) - /* 0xFFFFE8F0 */ +/* BCSR */ +#define CONFIG_SYS_BR1_PRELIM (0xE2400000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_SCY_15 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR) #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ @@ -211,11 +192,9 @@ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LBC_SDRAM_BASE \ - | BR_PS_32 /* 32-bit port */ \ - | BR_MS_SDRAM /* MSEL = SDRAM */ \ - | BR_V) /* Valid */ - /* 0xF0001861 */ +/* SDRAM */ +#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_32 | BR_MS_SDRAM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_64MB | OR_SDRAM_XAM | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) | OR_SDRAM_EAD) /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. @@ -231,12 +210,6 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_64MB \ - | OR_SDRAM_XAM \ - | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \ - | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \ - | OR_SDRAM_EAD) - /* 0xFC006901 */ /* LB sdram refresh timer, about 6us */ #define CONFIG_SYS_LBC_LSRT 0x32000000 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 0bf179a70b..e90d497f5e 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -211,56 +211,28 @@ boards, we say we have two, but don't display a message if we find only one. */ * BRx, ORx, LBLAWBARx, and LBLAWARx */ -/* Flash */ - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + /* Vitesse 7385 */ #define CONFIG_SYS_VSC7385_BASE 0xF8000000 #ifdef CONFIG_VSC7385_ENET -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) +/* VSC7385 */ +#define CONFIG_SYS_BR1_PRELIM (0xF8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + #endif -/* LED */ #define CONFIG_SYS_LED_BASE 0xF9000000 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_9 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) + +/* LED */ +#define CONFIG_SYS_BR2_PRELIM (0xF9000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* Compact Flash */ @@ -268,11 +240,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_CF_BASE 0xF0000000 -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ - | BR_PS_16 \ - | BR_MS_UPMA \ - | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) +/* CF */ +#define CONFIG_SYS_BR3_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_UPMA | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_UPM_BI) #endif diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index e10c58d7ed..e569e63741 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -162,20 +162,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFE000FF7 */ +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -189,20 +178,9 @@ */ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF8000801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFFE9F7 */ +/* BCSR */ +#define CONFIG_SYS_BR1_PRELIM (0xF8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* * NAND Flash on the Local Bus @@ -211,20 +189,10 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BASE 0xE0600000 -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB \ - | OR_FCM_BCTLD \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_RST \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - /* 0xFFFF919E */ + +/* NAND */ +#define CONFIG_SYS_BR3_PRELIM (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_FCM_BCTLD | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST | OR_FCM_TRLX | OR_FCM_EHTR) /* * Serial Port diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1e45b5ee3f..c1898a53a6 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -188,16 +188,9 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_9 \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFF800191 */ +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -210,38 +203,21 @@ * NAND Flash on the Local Bus */ #define CONFIG_SYS_NAND_BASE 0xE0600000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) + +/* NAND */ +#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR) + /* Vitesse 7385 */ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #ifdef CONFIG_VSC7385_ENET -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF0000801 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xfffe09ff */ +/* VSC7385 */ +#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + #endif /* diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 4479000d25..c76df2847d 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -76,22 +76,9 @@ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */ -/* 32 bit device at 0x80000000 via GPCM (0x8000_1801) */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BR_BA) \ - | BR_MS_GPCM \ - | BR_PS_32 \ - | BR_V) - -/* FLASH timing (0x0000_0c54) */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV4 \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_TRLX) - -#define CONFIG_SYS_PRELIM_OR_AM OR_AM_1GB /* OR addr mask: 1 GiB */ - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \ - | CONFIG_SYS_OR_TIMING_FLASH) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0x80000000 | BR_MS_GPCM | BR_PS_32 | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_1GB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET) /* disable remaining mappings */ #define CONFIG_SYS_BR1_PRELIM 0x00000000 diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h index ffd52a200a..a7eb5f5295 100644 --- a/include/configs/caddy2.h +++ b/include/configs/caddy2.h @@ -69,31 +69,16 @@ */ #define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16bit */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_4MB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xffc06ff7 */ + +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFFC00000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_4MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_WINDOW1_BASE 0xf0000000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_WINDOW1_BASE \ - | BR_PS_32 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF0001801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB \ - | OR_GPCM_SETA) - /* 0xfffc0208 */ + +/* WINDOW1 */ +#define CONFIG_SYS_BR1_PRELIM (0xF0000000 | BR_PS_32 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB | OR_GPCM_SETA) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index 4193ceb379..3fe72db188 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -169,19 +169,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ -/* Window base at flash base */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 @@ -195,19 +185,9 @@ #define CONFIG_SYS_FPGA0_BASE 0xE0600000 #define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */ -/* Window base at FPGA base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_1MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) +/* FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_1MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET) #define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE #define CONFIG_SYS_FPGA_DONE(k) 0x0010 diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 871b91f218..61f64ebbbc 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -142,17 +142,10 @@ #define CONFIG_SYS_FLASH_BASE 0xFF800000 #define CONFIG_SYS_FLASH_SIZE 8 -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE |\ - BR_PS_8 |\ - BR_MS_GPCM |\ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB |\ - OR_GPCM_SCY_10 |\ - OR_GPCM_EHTR |\ - OR_GPCM_TRLX |\ - OR_GPCM_CSNT |\ - OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFF800000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_GPCM_SCY_10 | OR_GPCM_EHTR_SET | OR_GPCM_TRLX_SET | OR_GPCM_CSNT | OR_GPCM_EAD) + #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 128 @@ -170,21 +163,9 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) #define NAND_CACHE_PAGES 64 -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE) |\ - BR_DECC_CHK_GEN |\ - BR_PS_8 |\ - BR_MS_FCM |\ - BR_V) - -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB |\ - OR_FCM_PGS |\ - OR_FCM_CSCT |\ - OR_FCM_CST |\ - OR_FCM_CHT |\ - OR_FCM_SCY_4 |\ - OR_FCM_TRLX |\ - OR_FCM_EHTR |\ - OR_FCM_RST) +/* NAND */ +#define CONFIG_SYS_BR1_PRELIM (0xE1000000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_PGS | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_4 | OR_FCM_TRLX | OR_FCM_EHTR | OR_FCM_RST) /* * MRAM setup @@ -194,11 +175,8 @@ #define CONFIG_SYS_OR_TIMING_MRAM -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_MRAM_BASE |\ - BR_PS_8 |\ - BR_MS_GPCM |\ - BR_V) - +/* MRAM */ +#define CONFIG_SYS_BR2_PRELIM (0xE2000000 | BR_PS_8 | BR_MS_GPCM | BR_V) #define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_7 | OR_GPCM_TRLX_SET) /* @@ -209,11 +187,8 @@ #define CONFIG_SYS_OR_TIMING_MRAM -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CPLD_BASE |\ - BR_PS_8 |\ - BR_MS_GPCM |\ - BR_V) - +/* CPLD */ +#define CONFIG_SYS_BR3_PRELIM (0xE3000000 | BR_PS_8 | BR_MS_GPCM | BR_V) #define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_SCY_1 | OR_GPCM_TRLX_SET) /* diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index 370e6b496a..5027073d6e 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -108,15 +108,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -125,15 +119,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -347,18 +336,9 @@ #define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 256 -#define CONFIG_SYS_BR3_PRELIM (\ - CONFIG_SYS_PAXE_BASE | \ - BR_PS_8 | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (\ - OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX | \ - OR_GPCM_EAD) +/* PAXE */ +#define CONFIG_SYS_BR3_PRELIM (0xA0000000 | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * BFTIC3 on the local bus CS4 @@ -366,18 +346,9 @@ #define CONFIG_SYS_BFTIC3_BASE 0xB0000000 #define CONFIG_SYS_BFTIC3_SIZE 256 -#define CONFIG_SYS_BR4_PRELIM (\ - CONFIG_SYS_BFTIC3_BASE |\ - BR_PS_8 | \ - BR_V) - -#define CONFIG_SYS_OR4_PRELIM (\ - OR_AM_256MB|\ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 |\ - OR_GPCM_SCY_2 |\ - OR_GPCM_TRLX |\ - OR_GPCM_EAD) +/* BFTIC3 */ +#define CONFIG_SYS_BR4_PRELIM (0xB0000000 | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR4_PRELIM (OR_AM_256MB| OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* enable POST tests */ #define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 2650544305..84516bb9bb 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -93,15 +93,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -110,15 +104,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -327,17 +316,8 @@ #define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 256 -#define CONFIG_SYS_BR3_PRELIM (\ - CONFIG_SYS_PAXE_BASE | \ - BR_PS_8 | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (\ - OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX | \ - OR_GPCM_EAD) +/* PAXE */ +#define CONFIG_SYS_BR3_PRELIM (0xA0000000 | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #endif /* CONFIG */ diff --git a/include/configs/kmopti2.h b/include/configs/kmopti2.h index 6e59fde6bd..678cb6a7cc 100644 --- a/include/configs/kmopti2.h +++ b/include/configs/kmopti2.h @@ -113,15 +113,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -130,15 +124,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -361,29 +350,17 @@ /* * Configuration for C2 on the local bus */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_CLEAR | \ - OR_GPCM_EAD) + +/* APP1 */ +#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD) /* * Configuration for C3 on the local bus */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_MS_GPCM | \ - BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | \ - OR_GPCM_SCY_4 | \ - OR_GPCM_TRLX_CLEAR | \ - OR_GPCM_EHTR_CLEAR) + +/* APP2 */ +#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_SCY_4 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR) #endif /* __CONFIG_H */ diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h index af39e8bb85..3e2e425c34 100644 --- a/include/configs/kmsupx5.h +++ b/include/configs/kmsupx5.h @@ -113,15 +113,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -130,15 +124,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -356,20 +345,8 @@ * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */ -/* - * Configuration for C2 on the local bus - */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_CLEAR | \ - OR_GPCM_EAD) +/* APP1 */ +#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD) #endif /* __CONFIG_H */ diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h index 1312aa2fa9..ed221e2301 100644 --- a/include/configs/kmtegr1.h +++ b/include/configs/kmtegr1.h @@ -120,15 +120,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -137,15 +131,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -411,15 +400,9 @@ * */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_CLEAR | \ - OR_GPCM_EHTR_CLEAR) +/* APP2 */ +#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_SCY_5 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR) /* ethernet port connected to piggy (UEC2) */ #define CONFIG_HAS_ETH1 diff --git a/include/configs/kmtepr2.h b/include/configs/kmtepr2.h index fd00ea86a9..c1ed71e2af 100644 --- a/include/configs/kmtepr2.h +++ b/include/configs/kmtepr2.h @@ -113,15 +113,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -130,15 +124,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -358,32 +347,12 @@ * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */ -/* - * Configuration for C2 on the local bus - */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_CLEAR | \ - OR_GPCM_EAD) +/* APP1 */ +#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD) -/* - * Configuration for C3 on the local bus - */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_MS_GPCM | \ - BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | \ - OR_GPCM_SCY_4 | \ - OR_GPCM_TRLX_CLEAR | \ - OR_GPCM_EHTR_CLEAR) +/* APP2 */ +#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_SCY_4 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR) #endif /* __CONFIG_H */ diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h index 3d9164714c..406b6e7824 100644 --- a/include/configs/kmvect1.h +++ b/include/configs/kmvect1.h @@ -112,15 +112,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -129,15 +123,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -400,24 +389,13 @@ * */ -/* - * APP1 on the local bus CS2 - */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_16 | \ - BR_MS_UPMA | \ - BR_V) +/* APP1 */ +#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_16 | BR_MS_UPMA | BR_V) #define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB) -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_3 | \ - OR_GPCM_TRLX_SET) +/* APP2 */ +#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_3 | OR_GPCM_TRLX_SET) #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 046355f645..31bf9971ab 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -179,19 +179,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFC000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 64 /* FLASH size is 64M */ -/* Window base at flash base */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_64MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_4 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFC000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_64MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_4 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 @@ -205,27 +195,19 @@ * SJA1000 CAN controller on Local Bus */ #define CONFIG_SYS_SJA1000_BASE 0xFBFF0000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_SJA1000_BASE \ - | BR_PS_8 /* 8 bit port size */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_EHTR_SET) - /* 0xFFFF8052 */ + +/* SJA1000 */ +#define CONFIG_SYS_BR1_PRELIM (0xFBFF0000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_SCY_5 | OR_GPCM_EHTR_SET) /* * CPLD on Local Bus */ #define CONFIG_SYS_CPLD_BASE 0xFBFF8000 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_CPLD_BASE \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB \ - | OR_GPCM_SCY_4 \ - | OR_GPCM_EHTR_SET) - /* 0xFFFF8042 */ + +/* CPLD */ +#define CONFIG_SYS_BR2_PRELIM (0xFBFF8000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | OR_GPCM_SCY_4 | OR_GPCM_EHTR_SET) /* * Serial Port diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index dffb7c6108..09cdb7c1a8 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -98,21 +98,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFF806FF7 */ +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFF800000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ diff --git a/include/configs/strider.h b/include/configs/strider.h index 184396e037..1519dad321 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -167,19 +167,9 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ -/* Window base at flash base */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 @@ -193,18 +183,9 @@ #define CONFIG_SYS_FPGA0_BASE 0xE0600000 #define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */ -/* Window base at FPGA base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_OR1_PRELIM (OR_AM_1MB \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_TRLX_CLEAR \ - | OR_GPCM_EHTR_CLEAR) +/* FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_1MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_SCY_5 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR) #define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE #define CONFIG_SYS_FPGA_DONE(k) 0x0010 diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index ad270de87d..6aacbc2077 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -110,15 +110,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -127,15 +121,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -353,24 +342,13 @@ * */ -/* - * APP1 on the local bus CS2 - */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_16 | \ - BR_MS_UPMA | \ - BR_V) +/* APP1 */ +#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_16 | BR_MS_UPMA | BR_V) #define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB) -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_3 | \ - OR_GPCM_TRLX_SET) +/* APP2 */ +#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_3 | OR_GPCM_TRLX_SET) #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/tuge1.h b/include/configs/tuge1.h index af6a348ba5..b11d49629a 100644 --- a/include/configs/tuge1.h +++ b/include/configs/tuge1.h @@ -113,15 +113,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -130,15 +124,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -356,20 +345,8 @@ * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */ -/* - * Configuration for C2 on the local bus - */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_CLEAR | \ - OR_GPCM_EAD) +/* APP1 */ +#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD) #endif /* __CONFIG_H */ diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 18476c12de..1bff837198 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -113,15 +113,9 @@ */ #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -130,15 +124,10 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -/* Window base at flash base */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) + +/* KMBEC_FPGA */ +#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port @@ -358,36 +347,13 @@ * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */ -/* - * Configuration for C2 on the local bus - */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_CLEAR | \ - OR_GPCM_EAD) +/* APP1 */ +#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD) -/* - * Configuration for C3 on the local bus - */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_CLEAR) +/* APP2 */ +#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR) #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 7dcc150f19..3a5bcf9c62 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -153,63 +153,25 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD) -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV4 \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EAD) - /* 0xfe000c55 */ - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_PS_8 \ - | BR_DECC_CHK_GEN \ - | BR_MS_FCM \ - | BR_V) /* valid */ - /* 0x61000c21 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_FCM_BCTLD \ - | OR_FCM_CHT \ - | OR_FCM_SCY_2 \ - | OR_FCM_RST \ - | OR_FCM_TRLX) /* 0xffff90ac */ +/* NAND */ +#define CONFIG_SYS_BR1_PRELIM (0x61000000 | BR_PS_8 | BR_DECC_CHK_GEN | BR_MS_FCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_BCTLD | OR_FCM_CHT | OR_FCM_SCY_2 | OR_FCM_RST | OR_FCM_TRLX) /* Still needed for spl_minimal.c */ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM -/* CS2 NvRAM */ -#define CONFIG_SYS_BR2_PRELIM (0x60000000 \ - | BR_PS_8 \ - | BR_V) - /* 0x60000801 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_3 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xfffe0937 */ -/* local bus read write buffer mapping SRAM@0x64000000 */ -#define CONFIG_SYS_BR3_PRELIM (0x62000000 \ - | BR_PS_16 \ - | BR_V) - /* 0x62001001 */ - -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32MB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xfe0009f7 */ +/* NVRAM */ +#define CONFIG_SYS_BR2_PRELIM (0x60000000 | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_3 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) + +/* SRAM */ +#define CONFIG_SYS_BR3_PRELIM (0x62000000 | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_AM_32MB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* * Serial Port diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 76821e7a40..dd8aae5117 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -69,31 +69,16 @@ */ #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16bit */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xf8006ff7 */ + +/* FLASH */ +#define CONFIG_SYS_BR0_PRELIM (0xF8000000 | BR_PS_16 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) #define CONFIG_SYS_WINDOW1_BASE 0xf0000000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_WINDOW1_BASE \ - | BR_PS_32 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF0001801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB \ - | OR_GPCM_SETA) - /* 0xfffc0208 */ + +/* WINDOW1 */ +#define CONFIG_SYS_BR1_PRELIM (0xF0000000 | BR_PS_32 | BR_MS_GPCM | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB | OR_GPCM_SETA) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/